The current study uses Reynolds equation and the cross-film flow velocity profile to analytically determine pertinent locations for texture feature positioning in sliding hydrodynamic contacts. The position of textures is shown to have a significant effect on the lubricant film thickness, thus the load carrying capacity and generated friction and power loss. It is shown that textures, residing after the inlet lubricant recirculation boundary and prior to the position of maximum contact pressure enhance film thickness and reduce friction in the contact of real rough sliding surfaces. The methodology is applied to partial surface texturing of a thin compression ring of a high performance race engine, with the predicted results confirming the utility of the expounded analytical technique and its conformance to the findings of others reported in literature. The time–efficient analytical and fundamental approach constitutes the main contribution of the paper to furtherance of knowledge.
EtsionI. State of the art in laser surface texturing. Trans ASME, J Tribol2005; 127: 248–253.
2.
RahnejatHBalakrishnanSKingPDet al.In-cylinder friction reduction using a surface finish optimization technique. Proc IMechE, Part D: J Automobile Engineering2006; 220: 1309–1318.
3.
MorrisNRahmaniRRahnejatHet al.A numerical model to study the role of surface textures at top dead center reversal in the piston ring to cylinder liner contact. J Tribol2016; 138: 021703–021703.
4.
RykGEtsionI. Testing piston rings with partial laser surface texturing for friction reduction. Wear2006; 261: 792–796.
Dwyer-JoyceRSGreenDABalakrishnanSet al.The measurement of liner-piston skirt oil film thickness by an ultrasonic means. SAE Technical Paper. 2006-01-0648, 2006.
7.
EtsionI. Surface texturing for in-cylinder friction reduction, New Delhi: Woodhead Publishing Ltd, 2010.
Morris NJ, Rahnejat H and Rahmani R. Tribology of partial pad journal bearings with textured surface. In: Proceedings of the 3rd European conference on tribology (ECOTRIB), Vienna, Austria, 7–9 June 2011, pp. 645–649.
11.
MorrisNLeightonMDe la CruzMet al.Combined numerical and experimental investigation of the micro-hydrodynamics of chevron-based textured patterns influencing conjunctional friction of sliding contacts. Proc IMechE, Part J: J Engineering Tribology2015; 229: 316–335.
12.
BirkhoffGHaysDF. Free boundaries in partial lubrication. J Math Phys1963; 42: 126–126.
13.
TipeiN. Boundary conditions of a viscous flow between surfaces with rolling and sliding motion. J Tribol1968; 90: 254–261.
14.
CupillardSCervantesMJGlavatskihS. Pressure buildup mechanism in a textured inlet of a hydrodynamic contact. J Tribol2008; 130: 021701–021701.
15.
ShahmohamadiHRahmaniRRahnejatHet al.Big end bearing losses with thermal cavitation flow under cylinder deactivation. Tribol Lett2015; 57: 1–7.
16.
ShahmohamadiHRahmaniRRahnejatHet al.Thermo-mixed hydrodynamics of piston compression ring conjunction. Tribol Lett2013; 51: 323–340.
17.
ShahmohamadiHMohammadpourMRahmaniRet al.On the boundary conditions in multi-phase flow through the piston ring-cylinder liner conjunction. Tribol Int2015; 90: 164–174.
18.
DobricaMBFillonM. About the validity of Reynolds equation and inertia effects in textured sliders of infinite width. Proc IMechE, Part J: J Engineering Tribology2009; 223: 69–78.
19.
HaddadSDTianK-T. Analytical study of offset piston and crankshaft designs and the effect of oil film on piston slap excitation in a diesel engine. Mech Mach Theory1995; 30: 271–284.
20.
TianTNoordzijLBWongVWet al.Modelling piston-ring dynamics, Blowby, and ring-twist effects. Trans ASME, J Eng Gas Turbines Pow1998; 120: 843–854.
21.
BakerCETheodossiadesSRahnejatHet al.Influence of in-plane dynamics of thin compression rings on friction in internal combustion engines. Trans ASME, J Eng Gas Turbines & Power2012; 134: 092801–092801.
22.
BakerCRahmaniRTheodossiadesSet al.On the effect of transient in-plane dynamics of the compression ring upon its tribological performance. Trans ASME, J Eng Gas Turbines & Power2015; 137: 032512–032512.
23.
RahmaniRTheodossiadesSRahnejatHet al.Transient elastohydrodynamic lubrication of rough new or worn piston compression ring conjunction with an out-of-round cylinder bore. Proc IMechE, Part J: J Engineering Tribology2012; 226: 284–305.
24.
SwiftHW. The stability of lubricating films in journal bearings. J Inst Civil Eng1932; 233(Part l): 267–267.
25.
StieberW. Dus Schwimmlager. Verein Deutscher Ingenieurre, Berlin: Ingenieurre, 1933.
26.
ReynoldsO. On the theory of lubrication and its application to Mr. Beauchamp tower’s experiments, including an experimental determination of the viscosity of olive oil. Proc R Soc Lond1886; 40: 191–203.
27.
GoharRRahnejatH. Fundamentals of tribology, London: Imperial College Press, 2008.
28.
MorrisNRahmaniRRahnejatHet al.Tribology of piston compression ring conjunction under transient thermal mixed regime of lubrication. Tribol Int2013; 59: 248–258.
29.
MorrisNRahmaniRRahnejatHet al.The influence of piston ring geometry and topography on friction. Proc IMechE, Part J: J Engineering Tribology2013; 227: 141–153.
30.
MaM-TSherringtonISmithEH. Analysis of lubrication and friction for a complete piston-ring pack with an improved oil availability model – Part 1: circumferentially uniform film. Proc IMechE, Part J: J Engineering Tribology1997; 211: 1–15.
31.
AkalinONewazGM. Piston ring-cylinder bore friction modeling in mixed lubrication regime: Part I – analytical results. J Tribol2001; 123: 211–218.
32.
MishraPCBalakrishnanSRahnejatH. Tribology of compression ring-to-cylinder contact at reversal. Proc IMechE, Part J: J Engineering Tribology2008; 222: 815–826.
33.
EtsionIKligermanYShinkarenkoA. Improving tribological performance on piston rings by partial surface texturing. J Tribol2005; 123: 632–638.
34.
KawasegiNSugimoriHMorimotoHet al.Development of cutting tools with microscale and nanoscale textures to improve frictional behaviour. Precis Eng2009; 33: 248–254.
35.
TeodorescuMBalakrishnanSRahnejatH. Integrated tribological analysis within a multi- physics approach to system dynamics. Tribol Interf Sci Ser2005; 48: 725–737.
36.
BriscoeBJEvansDCB. The shear properties of Langmuir-Blodgett layers. Proc R Soc Ser A: Math Phys Sci1982; 380: 389–407.
37.
GreenwoodJATrippJH. The contact of two nominally flat rough surfaces. Proc IMechE, Part C: J Mechanical Engineering Science1970–1971; 185: 625–633.
38.
AkalinONewazGM. Piston ring-cylinder bore friction modeling in mixed lubrication regime: Part II – correlation with Bench test data. J Tribol2001; 123: 219–223.
39.
GoreMRahmaniRRahnejatHet al.Assessment of friction from compression ring conjunction of a high-performance internal combustion engine: a combined numerical and experimental study. Proc IMechE, Part C: J Mechanical Engineering Science2016; 230: 2073–2085.
40.
LeightonMMorrisNGoreMet al.Boundary interactions of rough non-Gaussian surfaces. Proc IMechE, Part J: J Engineering Tribology2016; 230: 1359–1370.
41.
GoreMTheakerMHowell-SmithSet al.Direct measurement of piston friction of internal-combustion engines using the floating-liner principle. Proc IMechE, Part D: J Automobile Engineering2014; 228: 344–354.
42.
StylesGRahmaniRRahnejatHet al.In-cycle and life-time friction transience in piston ring-liner conjunction under mixed regime of lubrication. Int J Engine Res2014; 15: 862–876.
