In this study, the friction and wear properties of six different new and used wind turbine gear oils (ISO VG 320), with different base oil formulations and additives packages, were investigated. For that purpose, a four-ball tribometer and an Optimol SRV were used. Moreover, the lubricants extreme pressure properties were also evaluated, using the same four-ball tribometer. The study also includes a characterization of the lubricants. The main objective was to compare the new and used gear oils in order to identify performance differences and predict oil change intervals. The results indicate that a use of 3 to 4 years is within the lifetime of the lubricant.
HamiltionAQuailF. Detailed state of the art review for the different online/inline oil analysis techniques in context of wind turbine gearboxes. J Tribol2011.
4.
TakoutsingPWamkeueROuhroucheM, et al.Wind turbine condition monitoring: State-of-the-art review, new trends, and future challenges. Energies2014; 7: 2595–2630.
5.
Schulze T. Ganzheitliche dynamische Antriebsbetrachtung von Windenergieanlagen. Dissertation, TU Dresden, Germany, 2008.
Errichello R, Sheng S, Keller J, et al. Wind turbine tribology seminar. In: Wind and water power program, Broomfield, CO, USA, 15–17 November 2011.
8.
Musial W, Butterfield S and McNiff B. Improving wind turbine gearbox reliability. In: European wind energy conference, Milan, Italy, 7–10 May 2007.
9.
Stadler K, Vegter E, Ersson M, et al. Causes for premature bearing failure and the role of white etching cracks. In: 57. Tribologie–Fachtagung 2016 (ed GfT Gesellschaft für Tribologie e.V.), Göttingen, 26–28 September 2016.
10.
BruceTRoundingELongH, et al.Characterisation of white etching crack damage in wind turbine gearbox bearings. Wear2015; 338–339: 164–177.
11.
YangWTavnerPJCrabtreeCJ, et al.Wind turbine condition monitoring: Technical and commercial challenges. Wind Energy2014; 17: 673–693.
12.
Global Wind Energy Council. GWEC – Global Wind Report: Annual Market Update 2014, 2014.
13.
Global Wind Energy Council. Global Wind Report: Annual Market Update 2015, 2015.
14.
Global Wind Energy Council. Market Forecast 2016–2020, 2016.
15.
JohanssonJEDevlinMTPrakashB. Investigations into the occurrence of pitting in lubricated rolling four-ball tests. Lubr Sci2015; 27: 103–126.
16.
JohanssonJEDevlinMTPrakashB. Lubricant additives for improved pitting performance through a reduction of thin-film friction. Tribol Int2014; 80: 122–130.
17.
Al-TubiISLongH. Prediction of wind turbine gear micro pitting under variable load and speed conditions using ISO/TR 15144-1: 2010. Proc IMechE, Part C: J Mechanical Engineering Science2013; 227: 1898–1914.
18.
FernandesCMMarquesPMMartinsRC, et al.Film thickness and traction curves of wind turbine gear oils. Tribol Int2015; 86: 1–9.
19.
MarquesPMFernandesCMMartinsRC, et al.Efficiency of a gearbox lubricated with wind turbine gear oils. Tribol Int2014; 71: 7–16.
20.
FernandesCMMartinsRCSeabraJH. Torque loss of type C40 FZG gears lubricated with wind turbine gear oils. Tribol Int2014; 70: 83–93.
21.
FernandesCMMartinsRCSeabraJH. Friction torque of cylindrical roller thrust bearings lubricated with wind turbine gear oils. Tribol Int2013; 59: 121–128.
22.
FernandesCMMartinsRCSeabraJH. Friction torque of thrust ball bearings lubricated with wind turbine gear oils. Tribol Int2013; 58: 47–54.
23.
FernandesCMBattezAHGonzálezR, et al.Torque loss and wear of FZG gears lubricated with wind turbine gear oils using an ionic liquid as additive. Tribol Int2015; 90: 306–314.
24.
MongeRGonzálezRHernández BattezA, et al.Ionic liquids as an additive in fully formulated wind turbine gearbox oils. Wear2015; 328–329: 50–63.
25.
FernandesCMMarquesPMMartinsRC, et al.Gearbox power loss. Part I: Losses in rolling bearings. Tribol Int2015; 88: 298–308.
26.
FernandesCMMarquesPMMartinsRC, et al.Gearbox power loss. Part II: Friction losses in gears. Tribol Int2015; 88: 309–316.
27.
FernandesCMMarquesPMMartinsRC, et al.Gearbox power loss. Part III: Application to a parallel axis and a planetary gearbox. Tribol Int2015; 88: 317–326.
28.
FernandesCMHammamiMMartinsRC, et al.Power loss prediction: Application to a 2.5 MW wind turbine gearbox. Proc IMechE, Part J: J Engineering Tribology2016; 230: 983–995.
29.
Marquart M, Schürmann T, Braun J, et al. Einfluss von Schmierstoffen auf die Bildung von WEC. In: 57. Tribologie–Fachtagung 2016 (ed GfT Gesellschaft für Tribologie e.V.), Göttingen, 26.‐28.
30.
MikheevKSemenovKA. Service properties of fuels and oils: An integrated method for testing lubricants on a four-ball fraction machine. Khimiya i Tekhnologiya1969, pp. 44–50.
31.
American Society for Testing and Materials 2783-09. Standard test method for measurement of extreme-pressure properties of lubricating fluids (four-ball method), West Conshohocken, PA: ASTM, 2009.
32.
DIN Deutsches Institut für Normung e.V 26023. Mineralölerzeugnisse und verwandte Produkte-Bestimmung der EP-Eigenschaften und Verschleißkennwerte von Flüssigkeiten-Verfahren mit dem 4KugelApparat.
33.
Zaskal'koPPNekrasevVITerekhovAS. Correlation of indices of extreme-pressure properties of oils when evaluated in four-ball friction tester and in IAE gear machine. Khimiya i Tekhnologiya1978, pp. 40–44.
34.
American Society for Testing and Materials 4172-94. Standard test method for wear preventive characteristics of lubricating fluid (four-ball method), West Conshohocken, PA: ASTM, 1994.
American Society for Testing and Materials 6425-02. Standard test method for measuring friction and wear properties of extreme pressure (EP) lubricating oils using SRV test machine, West Conshohocken, PA: ASTM, 2002.
