A rotating spindle unit, supported by the journal bearings, is developed to improve the cavitation erosion resistance of the journal bearing as well as the spindle dynamic performance. The turbulent lubrication model considering velocity slip in cavitation zone is derived, and the static and dynamic parameters of the journal bearing are obtained. An identification algorithm is further derivated to identify simultaneously the 16 dynamic coefficients of the two journal bearings in the spindle unit. The available experimental results reveal that the journal bearing coefficients are well predicted and estimated by the present model, and the estimated bearing parameters by regularization solution are in good agreement with the assumed values, while it has opposite effect by directed solution for discrete ill-posed problems. It is concluded that the identification accuracy of bearing parameters is governed by the displacement error, and the percentage deviation of dynamic coefficients decreases with the decrease of the displacement error.
Swift HW. The stability of lubricating films in journal bearings. In: Minutes of the Proceedings of the Institution of Civil Engineers Vol. 233, 1932, pp.267–288.
2.
JakobssonBFlobergL. The finite journal bearing considering vaporization. Wear1958; 2: 85–88.
3.
OlssonK. Cavitation in dynamically loaded bearings. Wear1967; 55: 295–304.
4.
Elrod HG and Adams ML. A computer program for cavitation and starvation problems. In: Dowson D, Godet M and Taylor CM (eds) Proceedings of the first Leeds -Lyon symposium on tribology-cavitation and related phenomena in lubrication, mechanical engineering publications, New York, 1974, pp.37–41.
5.
ElrodHG. Efficient numerical method of the thermodynamics of laminar lubricating films. J Tribol1991; 113: 506–511.
6.
GroperMEtsionI. The effect of shear flow and dissolved gas diffusion on the cavitation in a submerged journal bearing. J Tribol2001; 123: 494–500.
7.
SunDCBreweDE. A high speed photography study of cavitation in a dynamically loaded journal bearing. J Tribol1991; 113: 287–294.
8.
ZhangHHuaMDongGNet al.Boundary slip surface design for high speed water lubricated journal bearings. Tribol Int2014; 79: 32–41.
9.
ChengFJiW. A velocity-slip model for analysis of the fluid film in the cavitation region of a journal bearing. Tribol Int2016; 97: 163–172.
10.
GuoHZhangSLCenSQ. Theoretical and experimental study on dynamic coefficients and stability for a hydrostatic/hydrodynamic conical bearing. J Tribol2009; 131: 701–708.
11.
YoshimotoSKumeTShitaraT. Axial load capacity of water lubricated hydrostatic conical bearings with spiral grooves for high speed spindles. Tribol Int1998; 31: 331–338.
12.
FranchekNMChildsDWAndresLS. Theoretical and experimental comparisons for rotor dynamic coefficients of a high-speed, high-pressure, orifice-compensated hybrid bearing. J Tribol1995; 117: 285–290.
13.
ZhangGYuanXDongG. The tribological behavior of Ni–Cu–Ag-based PVD coatings for hybrid bearings under different lubrication conditions. Tribol Int2010; 43: 197–201.
14.
PanDZhangYXuH. The structure of new journal hybrid bearing for high-speed machine spindle and its performance. Lubr Eng2009; 34: 11–14.
15.
GoharaMSomayaKMiyatakeMet al.Static characteristics of a water lubricated hydrostatic thrust bearing using a membrane restrictor. Tribol Int2014; 75: 111–116.
16.
FritzenC. Identification of mass, damping and stiffness matrices of mechanical systems. J Vib Acoust1986; 108: 9–16.
17.
RazpotnikMBischofTBoltezarM. The influence of bearing stiffness on the vibration properties of statically over determined gear boxes. J Sound Vib2015; 351: 221–235.
18.
Nordmann R. Identification of stiffness and damping coefficients of journal bearings by means of the impact method. Dynamics of Rotors 1984; 273: 395–409.
19.
De Santiago O and San Andrés L. Field methods for identification of bear support parameters, part I – identification from transient rotordynamic response due to impacts. Journal of Engineering for Gas Turbines and Power 2007; 129: 205–212.
20.
HaggACSankeyGO. Some dynamic properties of oil film journal bearing with reference to the unbalance vibration of rotors. J Appl Mech1956; 23: 302–305.
21.
StanwayR. Identification of linearized squeeze-film dynamics using synchronous excitation. Proc Inst Mech Eng1983; 197C: 199–204.
22.
MartinDLTabenkinANParsonsFG. Precision spindle and bearing error analysis. Int J Mach Tools Manuf1995; 35: 187–193.
MistryKBiswasSAthreK. A new theoretical model for analysis of the fluid film in the cavitation zone of a journal bearing. J Tribol1997; 119: 741–746.
25.
JangGHLeeSH. Determination of the dynamic coefficients of the coupled journal and thrust bearings by the perturbation method. Tribol Lett2006; 22: 239–246.
26.
MengFMYangT. Preliminary study on mechanism of cavitation in lubricant of textured sliding bearing. Proc IMechE, Part J: J Engineering Tribology2013; 227: 695–708.
27.
YangHRWangXLZhangYYet al.Study on the bubbly lubrication of journal bearings at various shear rates and temperatures. Tribol Int2014; 71: 132–139.
28.
LinXHJiangSYHuaCYet al.A thermohydrodynamic coupling model of oil aeration turbulent lubrication for journal bearing with interface effect. J Tribol2015; 137: 041705–1–041705-11.
29.
Tala-IghilNFillonM. A numerical investigation of both thermal and texturing surface effects on the journal bearings static characteristics. Tribol Int2015; 90: 228–239.
30.
GhoshMKMajumdarBC. Stiffness and damping characteristics of hydrostatic multirecess oil journal bearings. Int J Mach Tool Des Res1978; 18: 139–151.
31.
AnQZhouYSQuanYX. Study on the viscosity properties of bubbly oil and the static characteristics of journal bearing lubricated with bubbly oil. Wear1997; 213: 159–164.
32.
ManeshianBGandjalikhan NassabSA. Thermohydrodynamic characteristics of journal bearings running under turbulent condition. Int J Eng Trans A Basics2009; 22: 181–194.
33.
GroperMEtsionI. Reverse flow as a possible mechanism for cavitation pressure build-up in a submerged journal bearing. J Tribol2002; 124: 320–326.
34.
MaGJWuCWZhouP. Wall slip and hydrodynamics of two-dimensional journal bearing. Tribol Int2007; 40: 1056–1066.
35.
ZhangXYinZGaoGet al.Determination of stiffness coefficients of hydrodynamic water-lubricated plain journal bearings. Tribol Int2015; 85: 37–47.
36.
AleyaasinMWhalleyREbrahimiM. Error correction in hydrostatic spindles by optimal bearing tuning. Int J Mach Tools Manuf2000; 40: 809–822.
37.
FuhryMReichelL. A new Tikhonov regularization method. Numer Algorithms2012; 59: 433–445.
38.
CalvettiDMorigiSReichelLet al.Tikhonov regularization and the L-curve for large discrete ill-posed problems. J Comput Appl Math2000; 123: 423–446.
39.
ZhaoZMengZYouLet al.Identifying an unknown source in the Poisson equation by the method of Tikhonov regularization in Hilbert scales. Appl Math Model2014; 38: 4686–4693.
40.
NeubauerA. Tikhonov-regularization of III-posed linear operator equations on closed convex sets. J Approx Theory1988; 53: 304–320.
41.
ReichelLShyshkovA. A new zero-finder for Tikhonov regularization. Numer Math2008; 48: 627–643.
