Static characteristics of hydrostatic thrust bearing considering the inertia effect on the region of supply hole

In the previous studies on the hydrostatic thrust bearing, the differences between the theoretical results and experimental results are obvious when the inertia parameter S and the ratio of supply hole radius to bearing radius r₀/R become large enough. To explain the differences, in this study, the inertia effect on the region of supply hole is considered in discussing the static characteristics of hydrostatic thrust bearing, and then new expressions of pressure, load capacity, and flow rate are given. For the continuous parallel bearing, the results of this study agree well with experiments, thus there is no need for the extra modified inertia theory. For the step bearing with a large inertia parameter (e.g., S = 2), the results of this study agree with experiments on the recess region, and are closer to the experimental results than those of old method on the region of bearing land. So when the inertia parameter S and the ratio of supply hole radius to bearing radius r₀/R are large enough, the inertia effect on the region of supply hole cannot be ignored in discussing the static characteristics of hydrostatic thrust bearing.