Analysis of whirling motion for the dynamic system of floating ring seal and rotor

Abstract

In turbopumps, the dynamic characteristics of the floating ring seal and rotor system are important, especially when the floating ring seal fails to lock up. To investigate the motion of the system with the unlocked floating ring seal, a dynamic model for the whirling system is established in this study. On the basis of the perturbation method, the nonlinear model is simplified into a steady whirling model superimposed with perturbation motion. The transient bulk flow model is improved to calculate the hydrodynamic force in the seal clearance. The results show that the floating ring seal is able to steadily follow the rotor whirling motion and reduce the rotor whirling amplitude when the friction is not enough to lock the seal. The perturbation motion is calculated and proved stable, as the direct rotordynamic coefficients of the floating ring seal are much larger than the cross-coupled coefficients. Further, the effects of the mass and the friction of the floating ring seal, the rotor whirling amplitude and the interaction between the seal and the rotor on the dynamic characteristics of the whirling system are investigated.

Keywords

Floating ring seal rotor bulk flow whirling motion hydrodynamic force

Get full access to this article

View all access options for this article.

References

Oike M, Ndgao R, Nosaka M, et al. Characteristics of a shaft seal system for the LE-7 liquid oxygen turbopump. In: 31st joint propulsion conference and exhibit, San Diego, CA, 10–12 July 1995, pp. 3102.

Childs

. Finite-length solutions for rotordynamic coefficients of turbulent annular seals. J Lubr Technol 1983; 105: 437–445.

Hirs

. A bulk-flow theory for turbulence in lubricant films. J Lubr Technol 1973; 95: 137–145.

San Andres

. Analysis of variable fluid properties, turbulent annular seals. ASME J Tribol 1991; 113: 694–702.

Childs

. Annular honeycomb-stator turbulent gas seal analysis using new friction-factor model based on flat plate tests. ASME J Tribol 1994; 116: 352–360.

Childs

Kheireddin

Phillips

et al.

Friction factor behavior from flat-plate tests of smooth and hole-pattern roughened surfaces with supply pressures up to 84 bars. ASME J Eng Gas Turbines Power 2011; 133: 092504–092504.

Saba

Forte

Vannini

. Review and upgrade of a bulk flow model for the analysis of honeycomb gas seals based on new high pressure experimental data. J Mech Eng 2014; 60: 321–330.

Peng

Zhansheng

Jiajia

et al.

Lock-up characteristics of floating ring seals considering rotor whirling motion. J Eng Tribolo 2017; 232: 437–452.

Moore

. Three-dimensional CFD rotordynamic analysis of gas labyrinth seals. ASME J Vibr Acoust 2003; 125: 427–433.

10.

Chochua

Soulas

. Numerical modeling of rotordynamic coefficients for deliberately roughened stator gas annular seals. ASME J Tribol 2007; 129: 424–429.

11.

Yan

Feng

. Investigations on the rotordynamic characteristics of a hole-pattern seal using transient CFD and periodic circular orbit model. ASME J Vibr Acoust 2011; 133: 041007–041007.

12.

Shapiro

Hamm

. Seal technology for liquid oxygen (LOX) turbopumps. NASA. CR-174866, November 1985.

13.

Kirk

. Transient response of floating ring liquid seals. ASME J Tribol 1988; 110: 572–578.

14.

Mariot

Arghir

Helies

et al.

Experimental analysis of floating ring annular seals and comparisons with theoretical predictions. ASME J Eng Gas Turbines Power 2016; 138: 042503–1–042503-9.

15.

Lee

Kim

. Leakage and rotordynamic analysis of a high pressure floating ring seal in the turbo pump unit of a liquid rocket engine. Tribol Int 2002; 35: 153–161.

16.

Duan

Chu

Kim

et al.

A bulk-flow analysis of static and dynamic characteristics of floating ring seals. Tribol Int 2007; 40: 470–478.

17.

Arghir

Nguyen

Tonon

et al.

Analytic modeling of floating ring annular seals. ASME J Eng Gas Turbines Power 2012; 134: 052507–1–052507-9.

18.

Vasile

Nicolae

. Nonlinear dynamical systems in engineering, London: Springer, 2011, pp. 9–19.

19.

Nelson

Nguyen

. Analysis of eccentric annular incompressible seals: part 1 – a new solution using fast Fourier transforms for determining hydrodynamic forces. Trans ASME 1987; 52: 1–6.

20.

Ruan

Salant

Green

. A mixed lubrication model of liquid gas mechanical face seals. Tribol Trans 1997; 40: 647–657.

21.

Greenwood

Williamson

JBP

. Contact of nominally flat surfaces. Proc R Soc London A 1966; 295: 300–319.

22.

David

Ward

. Numerical analysis, 3rd ed. Beijing: China Machine Press, 2003, pp. 232–244.

23.

Singiresu

. Mechanical vibrations, 5th ed. New York: Prentice Hall, 2010, pp. 967–969.