Development of electrical enhanced photocatalysis polishing slurry for silicon carbide wafer

Abstract

Single-crystal silicon carbide, as one of the most promising next-generation semiconductor materials, should be polished with atomically smooth and damage-free surface to meet the requirements of semiconductor applications. The research presented in this paper aims to develop an electrical enhanced photocatalysis polishing method for atomic smoothing of Si-face (0001) 4H-SiC wafer based on the powerful oxidability of UV photo-excited hydroxyl radical on nano semiconductor particles. The research identifies the influences of photocatalyst, electron capturer, UV light, voltage and pH value by designing the orthogonal fading experiments of methyl orange and thus develops several slurries for electrical enhanced photocatalysis polishing accordingly. It also demonstrates that photocatalyst, UV light, electron capturer, and acid environment being necessaries for the electrical enhanced photocatalysis polishing process. Electricity can effectively prevent the recombination of electrons and holes generated on the surface of semiconductor particles and therefore enhance the polishing efficiency. Five photocatalysts including 5 nm TiO₂, P25, ZnO, CeO₂ and ZrO₂ have envious selectivity to the UV light. The slurry with P25 as the photocatalyst and H₂O₂ as electron capturer presents best polishing performance among, which provides a material removal rate of about 1.18 µm/h and a surface roughness of about Ra 0.0527 nm in an area of 1.0 × 1.0 µm. Furthermore, it also discusses how the UV light irradiation and electricity promotes the chemical oxidation of hydroxyl radical with SiC by forming “Si-C-O”, “Si-O” and “C-O” on SiC surface. The paper concludes that the proposed electrical enhanced photocatalysis polishing is an effective and clean manufacturing method for SiC wafer without rendering toxic chemical effect on environment and human health.

Keywords

Silicon carbide wafer electrical enhanced photocatalysis polishing slurries atomic smoothing micro cutting

Get full access to this article

View all access options for this article.

References

Tao

Tosiro

Syuhei

, et al. Polishing Characteristics of MnO₂ Polishing Slurry on the Si-face of SiC Wafer. Int J Precis Eng Manuf 2018; 19: 1773–1780.

Chen

. Anisotropy of chemical mechanical polishing in silicon carbide substrates. Mater Sci Eng B 2007; 142: 28–30.

Khodaei

Yaghobizadeh

Alhosseini

SHN

, et al. The effect of oxide, carbide, nitride and boride additives on properties of pressureless sintered SiC: a review. Int J Precis Eng Manuf 2019; 39: 2215–2231.

Wang

Zhang

. Overview of silicon carbide technology: device, converter, system, and application. CPSS Transac Power Electron Appl 2016; 1: 13–32.

Zeng

Shao

Chen

, et al. Changes and challenges of photovoltaic inverter with silicon carbide device. Renew Sustain Energy Rev 2017; 78: 624–639.

Elasser

Chow

. Silicon carbide benefits and advantages for power electronics circuits and systems. Proc IEEE 2002; 90: 969–986.

Padture

Jahanmir

. Effect of microstructure on material-removal mechanisms and damage tolerance in abrasive machining of silicon carbide. J Am Ceram Soc 1995; 78: 2443–2448.

Pan

Zhang

Yan

, et al. Experimental study of surface performance of monocrystalline 6H-SiC substrates in plane grinding with a metal-bonded diamond wheel. Int J Adv Manuf Technol 2017; 89: 619–627.

Namba

Kobayashi

Suzuki

, et al. Ultraprecision surface grinding of chemical vapor deposited silicon carbide for x-ray mirrors using resinoid-bonded diamond wheels. Ann CIRP 1999; 48: 277–280.

10.

Ding

, et al. Experimental studies on matching performance of grinding and vibration parameters in ultrasonic assisted grinding of SiC ceramics. Int J Adv Manuf Technol 2017; 88: 2527–2535.

11.

Ramachandran

Brady

Smith

, et al. Preparation of atomically flat surfaces on silicon carbide using hydrogen etching. J Electron Mater 1998; 27: 308–312.

12.

Wang

Yang

. Study on technique of magnetorheological finishing single crystal silicon carbide. Sci Technol Innov Herald 2010; 32: 112–113.

13.

Bai

Zhang

. Manufacture of silicon modification layer on silicon carbide surface by magnetorheological finishing. Acta Optic Sin 2015; 35: 1–7.

14.

Deng

Yamamura

. Atomic-scale flattening mechanism of 4H-SiC (0001) in Plasma assisted polishing. CIRP Ann Manuf Technol 2013; 62: 575–578.

15.

Deng

Ueda

Yamamura

. Characterization of 4H-SiC (0001) surface processed by plasma-assisted polishing. Int J Adv Manuf Technol 2014; 72: 1–7.

16.

Zhao

Kunieda

Abe

. Comparison on foil EDM characteristics of single crystal SiC between in deionized water and in EDM oil. Int J Adv Manuf Technol 2016; 86: 2905–2912.

17.

Lee

Jeong

. Mechanical aspects of the chemical mechanical polishing process: a review. Int J Precis Eng Manuf 2016; 17: 525–536.

18.

Roy

Chandra

Das

, et al. Oxidation behaviour of silicon carbide – a review. Rev Adv Mater Sci 2014; 38: 22–39.

19.

Lagudu

URK

Isono

Krishnan

, et al. Role of ionic strength in chemical mechanical polishing of silicon carbide using silica slurries. Colloids Surf A Physicochem Eng Aspects 2014; 445: 119–127.

20.

Shi

Pan

Zhou

, et al. Characterization of colloidal silica abrasives with different sizes and their chemical-mechanical polishing performance on 4H-SiC (0001). Appl Surf Sci 2014; 307: 414–427.

21.

Zhou

Audurier

Pirouz

, et al. Chemomechanical polishing of silicon carbide. J Electrochem Soc 1997; 144: L161–L163.

22.

Zorman

Mehregany

. Chemical mechanical polishing of cubic silicon carbide films grown on Si (100) wafers. J Electrochem Soc 2002; 149: 643–647.

23.

Kikuchi

Takahashi

Suga

, et al. Mechanochemical polishing of silicon carbide single crystal with chromium(III) oxide abrasive. J Am Ceram Soc 1992; 75: 189–194.

24.

Zhu

Muratov

Fischer

. Tribochemical polishing of silicon carbide in oxidant solution. Wear 1999; 225–229: 848–856.

25.

Bhat

Wang

, et al. Electro-chemical mechanical polishing of silicon carbide. J Electron Mater 2004; 33: 481–486.

26.

Hou

Chou

. A new treatment for kinetics of oxidation of silicon carbide. Ceram Int 2009; 35: 603–607.

27.

Costello

Tressler

. Oxidation kinetics of silicon carbide crystals and ceramics: I, in dry oxygen. J Am Ceram Soc 1986; 69: 674–681.

28.

Bazrafshan

Tesieh

Dabirnia

, et al. Low temperature synthesis of TiO₂ nanoparticles with high photocatalytic activity and photoelectrochemical properties through Sol-Gel method. Mater Manuf Proc 2016; 31: 119–125.

29.

Daghrir

Drogui

Robert

. Photoelectrocatalytic technologies for environmental applications. J Photochem Photobiol A 2012; 238: 41–52.

30.

Tolosana-Moranchel

Casas

Carbajo

, et al. Influence of TiO₂ optical parameters in a slurry photocatalytic reactor: kinetic modelling. Appl Catal B Environ 2017; 200: 164–173.

31.

Liao

. Shape, size and photocatalytic activity control of TiO₂ nanoparticles with surfactants. J Photochem Photobiol A 2007; 187: 363–369.

32.

Shi

Fan

, et al. Effects of particle size of TiO₂ on photocatalytic degradation of methylene blue in aqueous suspensions. Ind Eng Chem Res 1999; 38: 373–379.

33.

Chen

, et al. Performance of colloidal silica and ceria based slurries on CMP of Si-face 6H SiC substrates. Appl Surf Sci 2015; 359: 664–668.

34.

Ziegler

Kaiser

, et al. Solar water splitting with p-SiC film on p-Si: photoelectrochemical behavior and XPS characterization. Int J Hydrogen Energy 2014; 39: 1623–1629.