Nanocomposite gears and standard mechanical testing specimens based on polyoxymethylene containing different fractions (0, 3, 6, and 9 wt%) of nanosized precipitated calcium carbonate particles were produced by using twin-screw extruder and injection molding machine. The wear and temperature of gears teeth were measured by a gear test rig. The morphologies of fractured gears teeth were analyzed by using scanning electron microscopy. Results of experiments indicate that the incorporation of CaCO3 nanoparticles into polyoxymethylene increases the flexural and heat resistance and reduces the magnitudes of wear and temperature of gears noticeably. The maximum flexural resistance is achieved by employing 3 wt% of CaCO3 nanoparticles. Gears containing 3 wt% of CaCO3 nanoparticles present the lowest wear rate, which is 61% smaller than that of neat polyoxymethylene gear. The life time (durability till failure) of nanocomposite gear was twofold as compared to neat polyoxymethylene gear. The nanocomposite gear showed abrasive-wear and brittle-fracture, yet the neat polyoxymethylene gear demonstrated prevailing cohesive wear and ductile failure.
CampoEA. Selection of polymeric materials: how to select design properties from different standards, New York: William Andrew, 2008.
2.
ZhangS. State-of-the-art of polymer tribology. Tribol Int1998; 31: 49–60.
3.
GaoXQuCZhangQ, et al.Brittle-ductile transition and toughening mechanism in POM/TPU/CaCO3 ternary composites. Macromol Mater Eng2004; 289: 41–48.
4.
Wacharawichanant S, Sahapaibounkit P and Saeueng U. Study on mechanical and morphological properties of polyoxymethylene/Al2O3 nanocomposites. In: Proceedings of the TIChE international conference, Thailand, 10–11 November 2011.
5.
HashemiSElmesPSandfordS. Hybrid effects on mechanical properties of polyoxymethylene. Polym Eng Sci1997; 37: 45–58.
6.
KurokawaMUchiyamaYNagaiS. Tribological properties and gear performance of polyoxymethylene composites. J Tribol2000; 122: 809–814.
7.
FuadMYAHanimHZarinaR, et al.Polypropylene/calcium carbonate nanocomposites: effects of processing techniques and maleated polypropylene compatibiliser. Express Polym Lett2010; 10: 610–620.
8.
KongkhlangTKousakaYUmemuraT, et al.Role of primary amine in polyoxymethylene (POM)/bentonite nanocomposite formation. Polymer2008; 49: 1676–1684.
9.
PavlidouSPapaspyridesC. A review on polymer–layered silicate nanocomposites. Prog Polym Sci2008; 33: 1119–1198.
10.
Mohd Ishak ZA, Chow WS, Takeichi T, et al. Effect of organoclay modification on the mechanical, morphology, and thermal properties of injection molded polyamide 6 /polypropylene /montmorillonite nanocomposites. In: Proceedings of the polymer processing society, 24th annual meeting, Salerno, Italy, 2008.
11.
MareriPBastideSBindaN, et al.A mechanical behaviour of polypropylene composites containing fine mineral filler: effect of filler surface treatment. Compos Sci Technol1998; 58: 747–752.
12.
SunLHYangZGLiXH. Study on the friction and wear behavior of POM/Al2O3 nanocomposites. Wear2008; 264: 693–700.
13.
ZhangQXYuZZXieXL, et al.Crystallization and impact energy of polypropylene/CaCO3 nanocomposites with nonionic modifier. Polymer2004; 45: 5985–5994.
14.
BakarAARosliNN. Effect of nano-precipitated calcium carbonate on mechanical properties of PVC-U and PVC-U/acrylic blend. Jurnal Teknologi2006; 45: 83–93.
15.
YangKYangQLiG, et al.Morphology and mechanical properties of polypropylene/calcium carbonate nanocomposites. Mater Lett2006; 60: 805–809.
16.
HanimHZarinaRMyAF, et al.The effect of calcium carbonate nanofiller on the mechanical properties and crystallisation behaviour of polypropylene. Malaysian Polym J2008; 31: 38–49.
17.
Motalebi M, Orang H and Shelesh-Nezhad K. The comparison of PA6/nano-CaCO3 and PA6/nano-silica mechanical properties. In: The 11th Iranian conference on manufacturing engineering, 2010, pp.19–21.
18.
MohsenzadehRBonabANSayyed NooraniMR. Experimental study on the thermal behavior and mechanical properties of PA6/CaCO3 nanocomposites. Nanomaterials2015; 21: 45–52.
19.
ZhangMWangXFuX, et al.Performance and anti-wear mechanism of CaCO3 nanoparticles as a green additive in poly-alpha-olefin. Tribol Int2009; 42: 1029–1039.
20.
MohsenzadehRBonabANSayyed NooraniMR. Experimental study on the water absorption and tribological properties of PA6/CaCO3 nanocomposites. Modares Mech Eng2015; 15: 1993–2000.
21.
SureshaBKumarBRVenkataramareddyM, et al.Role of micro/nano fillers on mechanical and tribological properties of polyamide66/ polypropylene composites. Mater Des2010; 31: 1993–2000.
22.
WrightNKukurekaS. Wear testing and measurement techniques for polymer composite gears. Wear2001; 251: 1567–1578.
23.
SinghPKSinghAK. An investigation on the thermal and wear behavior of polymer based spur gears. Tribol Int2018; 118: 264–272.
24.
SenthilvelanSGnanamoorthyR. Effect of rotational speed on the performance of unreinforced and glass fiber reinforced Nylon 6 spur gears. Mater Des2007; 28: 765–772.
25.
KirupasankarSGurunathanCGnanamoorthyR. Transmission efficiency of polyamide nanocomposite spur gears. Mater Des2012; 39: 338–343.
26.
Ashrafi E, Nezami-Fard A and Shelesh-Nezhad K. Experimental study of wear behavior in polyacetal (POM)/clay nanocomposite gears. In: The 2nd international conference on composites, Kish Island, Iran, 2010, pp.27–30.
27.
ChangLZhangZZhangH, et al.On the sliding wear of nanoparticle filled polyamide 66 composites. Compos Sci Technol2006; 66: 3188–3198.
28.
KemalIWhittleABurfordR, et al.Toughening of unmodified polyvinylchloride through the addition of nanoparticulate calcium carbonate. Polymer2009; 50: 4066–4079.
29.
ChangLFriedrichK. Enhancement effect of nanoparticles on the sliding wear of short fiber-reinforced polymer composites: a critical discussion of wear mechanisms. Tribol Int2010; 43: 2355–2364.
30.
AlyAAZeidanESAlshennawyAA, et al.Friction and wear of polymer composites filled by nano-particles: a review. World J Nano Sci Eng2012; 2: 32–39.
31.
MohsenzadehRShelesh-NezhadK. Experimental studies on the durability of PA6-PP-CaCO3 nanocomposite gears. J Sci Technol Compos2016; 3: 147–156.
32.
ShishanWDingjunJXiaodongO, et al.The structure and properties of PA6/MMT nanocomposites prepared by melt compounding. Polym Eng Sci2004; 44: 2070–2074.
33.
SrinathGGnanamoorthyR. Sliding wear performance of polyamide 6–clay nanocomposites in water. Compos Sci Technol2007; 67: 399–405.
34.
XieXLLiuQXLiRK, et al.Rheological and mechanical properties of PVC/CaCO3 nanocomposites prepared by in situ polymerization. Polymer2004; 45: 6665–6673.
35.
CaiHYanFXueQ, et al.Investigation of tribological properties of Al2O3-polyimide nanocomposites. Polym Test2003; 22: 875–882.
36.
ShiGZhangMQRongMZ, et al.Sliding wear behavior of epoxy containing nano-Al2O3 particles with different pretreatments. Wear2004; 256: 1072–1081.
37.
MaoK. A new approach for polymer composite gear design. Wear2007; 262: 432–441.
38.
SinghAKSinghPK. Polymer spur gears behaviors under different loading conditions: a review. Proc IMechE, Part J: J Engineering Tribology2017; 232: 210–228.
