Direct fluid–structure coupling analysis of reciprocating series seals in hydropneumatic suspension

Abstract

The reciprocating piston seals are crucial parts in hydraulic system, which are widely used in aerospace and military industry. A direct fluid–structure coupling method with high efficiency is proposed for solving the transient Elaso-Hydrodynamic-Lubrication problem in float piston series seal system of hydropneumatic suspension. The method is validated by theory solution of a simple pad-bearing film model. Detailed three-dimensional fluid–structure coupling model of the seal system is built using finite element discretization. Rubber material tests are carried out to obtain parameters of the third-order Ogden constitutive model for the O-ring seal. The sealing performance and friction force of the complicated series seal system are analyzed with direct fluid–structure dynamic coupling simulation in high pressure and high speeds conditions. The critical speed from mixed lubrication to full film lubrication is obtained. The fluid velocity and pressure distribution in the sealing gap along axial direction is compared. The outlet volume flux leakage in different piston speeds and inlet pressures is calculated to evaluate the sealing performance. The friction force experiment for the float piston system is carried out in various speeds. The friction force from direct fluid–structure interface simulation coincides well with the test result.

Keywords

Fluid–structure coupling piston seal friction elasto hydrodynamic lubrication Ogden constitutive model

Get full access to this article

View all access options for this article.

References

Nikas

. Eighty years of research on hydraulic reciprocating seals: review of tribological studies and related topics since the 1930s. Proc IMechE, Part J: J Engineering Tribology 2008; 224: 1–23.

Nikas

Research on the tribology of hydraulic reciprocating seals. In: Hasegawa

(ed). Tribology research trends, New York, NY: Nova Science Publishers, 2008, pp. 11–56.

Trelleborg. Hydraulic Seals – linear Piston seals, www.tss.trelleborg.com (2007, accessed 12 October 2019).

White

Denny

. The sealing mechanism of flexible packings, London, UK: Scientific and Technical Memorandum, UK Ministry of Supply, 1947, pp. 56–82.

XueZhiquan. Analysis on the reciprocating seal mechanism of the aircraft hydraulic cylinder. MS Thesis, Zhe Jiang University, China, 2016, pp.45–87.

Öngün

André

Bartel

Deters

. An axisymmetric hydrodynamic interface element for finite-element computations of mixed lubrication in rubber seals. Proc IMechE, Part J: J Engineering Tribology 2008; 222: 182–185.

Yang

Richard

. Salant. Soft EHL Simulations of U-Cup and Step Hydraulic Rod Seals. J Tribol 2009; 131: 1–9.

Shi

Salant

. A mixed soft elasto hydrodynamic lubrication model with inter-asperity cavitation and surface shear deformation. J Tribol T ASME 2000; 122: 308–316.

Schmidt

Andre

Poll

. A transient 2D-finite element approach for the simulation of mixed lubrication effects of reciprocating hydraulic rod seals. Tribol Int 2010; 43: 1775–1785.

10.

Salant

Maser

Yang

. Numerical model of a reciprocating rod seal. ASME J Tribol 2007; 129: 91–97.

11.

Stupkiewicz

Marciniszyn

. Elasto hydrodynamic lubrication and finite configuration changes in reciprocating elastomeric seals. Tribol Int 2009; 42: 615–627.

12.

Nikas

. Elasto hydrodynamics and mechanics of rectangular elastomeric seals for reciprocating piston rods. ASME J Tribol 2003; 125: 60–69.

13.

Gao

, et al. A strongly coupled fluid structure interaction solution for transient soft elasto-hydrodynamic lubrication problems in reciprocating rod seals based on a combined moving mesh method. J Tribol 2015; 137: 1–13.

14.

Field

Nau

BSA

. Theoretical study of the elasto hydrodynamic lubrication of reciprocating rubber seals. ASLE Trans 1974; 18: 48–54.

15.

Hamrock

. Fundamentals of fluid film lubrication, New York, NY: McGraw-Hill, 1994, pp. 67–88.

16.

Hirano F and Kaneta M. Theoretical investigation of friction and sealing characteristic of flexible seals for reciprocating motion. In: Proceedings of the 5th BHRA international conference on fluid sealing, Warwick, UK, 1971, pp.18–25. London, UK: BHRA.

17.

Crudu

Fatu

, et al. A numerical and experimental friction analysis of reciprocating hydraulic ‘U’ rod seals. J Eng Tribol 2012; 226: 785–794.

18.

Bisztray-Balku

. Design development and tribology of reciprocating hydraulic seals. Polytech Ser Mech Eng 2004; 47: 163–178.

19.

Kaneta M, Takeshima T, Togami S, et al. Stribeck curve in reciprocating seals. In: Proceedings of the 18th international conference on fluid sealing 2005, Antwerp, Belgium, 12–14 October 2005, pp.333–347. London, UK: BHRA.

20.

Müller HK. Leakage and friction of flexible packings at reciprocating motion with special consideration of hydrodynamic film formation. In: Proceedings of the 2nd international conference on fluid sealing 1964, pp.13–28. London, UK: BHRA.

21.

Maoui

Hajjam

Bonneau

. Effect of 3D lip deformations on elasto hydrodynamic lip seals behavior. Tribol Int 2008; 41: 901–907.

22.

Wennehorst B and Poll GWG. Optical investigations into dynamic radial sealing contacts with a special emphasis on the application of the laser induced fluorescence method. In: Proceedings of 4th world tribology congress, Kyoto, Japan, 2009, pp.20–30. Available at: https://www.tribology.jp/WTC2009/congre/data/sympo.html.

23.

Hadinata

Stephens

. Soft Elastohydrodynamic analysis of radial lip seals with deterministic micro-asperities on the shaft. J Tribol 2007; 129: 851–858.

24.

Tonder

Salant

. Non-leaking lip seals: a roughness effect study. ASME J Tribol 1992; 114: 595–599.

25.

Siripuram R. Analysis of hydrodynamic effects of micro-asperity shapes on thrust bearing surfaces. MS Thesis, University of Kentucky, Lexington, KY, 2003, pp.67–89.

26.

Hajjam

Bonneau

. Influence of the roughness model on the thermo-elasto hydrodynamic performances of lip seals. Tribol Int 2006; 39: 198–205.

27.

Harp

Salant

. An average flow model of rough surface lubrication with inter-asperity cavitation. J Tribol T ASME 2001; 123: 134–143.

28.

Kanters AFC and Visscher M. Lubrication of reciprocating seals: experiments on the influence of surface roughness on friction and leakage. In: Proceedings of the 15th Leeds–Lyon symposium on tribology, Vienna, Austria, 4–7 September 1988, pp.69–77. Asmterdam: Elsevier.

29.

Bathe

. Finite element procedures, Upper Saddle River, NJ: Prentice Hall, 1996, pp. 153–160.