Based on computational fluid dynamics, a two-phase flow model was established to calculate the churning power loss of the spiral bevel gears under splash lubrication. The error between the simulation results and experiment results is only 7.04%. Taking a certain helicopter as an example, the churning power loss of the intermediate gearbox is ∼2.6051 kW, accounting for ∼1.93% of the input power. Besides, the motion mechanisms of free flow, ejection flow and splashing flow of the spiral bevel gear were investigated. The influences of the rotational speed and oil immersion depth on the churning power loss were analysed. The rotational speed and oil immersion depth of the intermediate gearbox should be in the range of 3000–5000 r/min and 17–26 mm, respectively, which can ensure sufficient lubrication and low churning power loss.
HöhnBRMichaelisKVollmerT. Thermal rating of gear drives: balance between power loss and heat dissipation 1996; AGMA Paper No. 96FTM8.
4.
SeetharamanSKahramanA. Load-independent spin power losses of a spur gear pair: model formulation. J Tribol2009; 131: 022201. https://doi.org/10.1115/13085943
5.
SeetharamanSKahramanAMoorheadMD, et al.Oil churning power losses of a gear pair: experiments and model validation. J Tribol2009; 131: 022202. https://doi.org/10.1115/1.3085942
6.
MassiniDFondelliTAndreiniA, et al.Experimental and numerical investigation on windage power losses in high speed gears. ASME turbo expo 2017: turbomachinery technical conference and exposition, 2017, No. GT2017-64948, p.V05BT15A034. https://doi.org/10.1115/GT2017-64948
ConcliFGorlaC. CFD simulation of power losses and lubricant flows in gearboxes (2017). In: American Gear Manufacturers Association Fall Technical Meeting 2017, January 2017, pp.2–14.
10.
HillMJ. A computational investigation of gear windage. PhD Thesis, The Pennsylvania State University, 2010.
11.
ArisawaHNishimuraMImaiH, et al. CFD simulation for reduction of oil churning loss and windage loss on aeroengine transmission gears. Proceedings of the ASME Turbo Expo 2009: Power for Land, Sea, and Air. Volume 1: Aircraft Engine; Ceramics; Coal, Biomass and Alternative Fuels; Controls, Diagnostics and Instrumentation; Education; Electric Power; Awards and Honors, Orlando, Florida, USA. June 8–12, 2009. pp.63–72. ASME. https://doi.org/10.1115/GT2009-59226
LiuHJurkschatTLohnerT, et al.Determination of oil distribution and churning power losses of gearboxes by finite volume CFD method. Tribol Int2017; 109: 346–354. https://doi.org/10.1016/j.triboint.2016.12.042
14.
ConcliFGorlaC. Numerical modeling of the churning power losses in planetary gearboxes: an innovative partitioning based meshing methodology for the application of a computational effort reduction strategy to complex gearbox configurations. Lubr Sci2017; 29: 455–474. https://doi.org/10.1002/ls.1380
15.
PengQLGuiLGFanZJ. Numerical and experimental investigation of splashing oil flow in a hypoid gearbox. Eng Appl Comput Fluid Mech2018; 12: 324–333. https://doi.org/10.1080/19942060.2018.1432506
16.
ConcliFGorlaCRosaFConradoE. Effect of the static pressure on the power dissipation of gearboxes. Lubr Sci2019; 31: 347–355. DOI: 10.1002/ls.1476
17.
HuXLiPWuM. Influence of the dynamic motion of a splash-lubricated gearbox on churning power losses. Energies2019; 12(17): 3225.
18.
JiangYHuXHongSLiPWuM. Influences of an oil guide device on splash lubrication performance in a spiral bevel gearbox. Tribol Int2019; 136: 155–164. DOI: 10.1016/j.triboint.2019.03.048
19.
MenonMSchifkoMPengCChitneediB, et al. Obtaining precise churning loss for a gearbox using advanced smoothed particle hydrodynamics. SAE Technical Papers 2019-June (June). DOI: 10.4271/2019-01-0348
20.
ConcliFGorlaC. Influence of lubricant temperature, lubricant level and rotational speed on the churning power loss in an industrial planetary speed reducer: computational and experimental study. Int J Comput Methods Exp Meas2013; 1: 353–366. DOI: 10.2495/CMEM-V1-N4-353-366
21.
ConcliFGorlaCTorreADMontenegroG. Windage power losses of ordinary gears: different CFD approaches aimed to the reduction of the computational effort. Lubricants2014; 2: 162–176. DOI: 10.3390/lubricants2040162
22.
ConcliFGorlaC. A CFD analysis of the oil squeezing power losses of a gear pair. Int J Comput Methods Exp Meas2014: 2: 157–167. DOI: 10.2495/CMEM-V2-N2-157-167
23.
OrszagSAYakhotVFlanneryWS, et al. Renormalization group modeling and turbulence simulations. In: International conference on near-wall turbulent flows, Tempe, Arizona, 1993.
24.
HirtCWNicholsBD. Volume of fluid (VOF) method for the dynamics of free boundaries. J Comput Phys1981; 39: 201–225.
25.
ArisawaHNishimuraMImaiH, et al.Computational fluid dynamics simulations and experiments for reduction of oil churning loss and windage loss in aeroengine transmission gears. J Eng Gas Turbines Power2014; 136: 092604. https://doi.org/10.1115/1.4026952
