In cylindrical roller bearings, the drag effect may be induced by the rolling element translating in a fluid environment of the bearing cavity. In this article, the computational fluid dynamics method and experimental tests are employed to analyse its flow characteristics and pressure distribution. The results indicate that the pressure difference between the windward side and the leeward side of the cylinder is raised in view of it blocking the flow field. Four whirl vortexes are formed in four outlets of two wedge-shaped areas between the front part of the cylindrical surface and adjacent walls for the cylinder of L/D = 1.5 at Re = 4.5 × 103. Vortex shedding is found in the direction of cylinder axis at Re = 4.5 × 104. The relationship between drag coefficient and Reynolds number is illustrated, obviously higher than that of the two-dimensional cylinder in open space.
BiswasSKumarJSatishkumarV,et al.Failure analysis of a squirrel cage bearing of a gas turbine engine. In: Advances in structural integrity. Singapore: Springer, 2018, pp.117–125.
2.
KumbernussJJianCWangJ, et al.A novel magnetic levitated bearing system for vertical axis wind turbines (VAWT). Appl Energy2012; 90: 148–153.
3.
TorregrosaABroatchAGarciaA, et al.Sensitivity of combustion noise and NOx and soot emissions to pilot injection in PCCI diesel engines. Appl Energy2013; 104: 149–157.
4.
HongS-WTongV-C. Rolling-element bearing modeling: a review. Int J Prec Eng Manuf2016; 17: 1729–1749.
5.
SousaGPJVillafaneL. Thermal analysis and modeling of surface heat exchangers operating in the transonic regime. Energy2014; 64: 961–969.
6.
WuWHuCHuJ, et al.Jet cooling for rolling bearings: flow visualization and temperature distribution. Appl Therm Eng2016; 105: 217–224.
7.
GaoWNeliasDBoissonN, et al.Model formulation of churning losses in cylindrical roller bearings based on numerical simulation. Tribol Int2018; 121: 420–434.
8.
LiebrechtJSiXSauerB, et al.Investigation of drag and churning losses on tapered roller bearings. J Mech Eng2015; 61: 399–408.
9.
NeliasDSeabraJFlamandL, et al.Power loss prediction in high-speed roller bearings. Tribol Ser1994; 27: 465–478.
10.
TUM. Validation and modeling of power losses of nj406 cylindrical roller bearings, Master’s thesis, KTH, Machine Design. Sweden, 2016.
11.
GaoWLyuYLiuZ, et al.Validation and application of a numerical approach for the estimation of drag and churning losses in high speed roller bearings. Appl Therm Eng2019; 153: 390–397.
12.
GaoWNeliasDLyuY, et al.Numerical investigations on drag coefficient of circular cylinder with two free ends in roller bearings. Tribol Int2018; 123: 43–49.
13.
NicholsonBDGivanGDThompsonKL, et al.Assessment of bearing heat generation prediction by the program adore with respect to experimental results and Shaberth predictions. In: ASME Turbo Expo. Charlotte, North Carolina, USA: ASME, 2017, p.V001T01A001.
14.
TakahashiSNonomuraTFukudaK. A numerical scheme based on an immersed boundary method for compressible turbulent flows with shocks: application to two-dimensional flows around cylinders. J Appl Math2014; 2014: 21. Article ID 252478.
15.
HirschC. Numerical computation of internal and external flows: the fundamentals of computational fluid dynamics. Elsevier, Butterworth-Heinemann, 2007.
16.
ZdravkovichMM. Flow around circular cylinders: applications. 1st ed., vol.2. USA: Oxford university press, 2002.
17.
SheardGJThompsonMCHouriganK. Computing the flow past a cylinder with hemispherical ends. ANZIAM J2005; 46: 1296–1310.
18.
FukuokaHHirabayashiSSuzukiH. The effects of free surface and end cell on flow around a finite circular cylinder with low aspect ratio. J Mar Sci Technol2016; 21: 145–153.
19.
CaballeroRSaenzAVBerbey-AlvarezA, et al. Six Degree of Freedom Underwater Vehicle for Culvert Inspection[C]//Clawar 2014. 2014.
20.
KumarARayRK. Numerical simulation of flow around square cylinder with an inlet shear in a closed channel. In: Applications of fluid dynamics, Singapore: Springer, 2018, pp.297–304.
21.
SinghaSSinhamahapatraK. Flow past a circular cylinder between parallel walls at low Reynolds numbers. Ocean Eng2010; 37: 757–769.
22.
Wenjun GaoZLYLNeliasDaniel. Numerical investigation of flow around one finite circular cylinder with two free ends. Ocean Eng2018; 156: 373–380.
23.
EgorovYMenterF. Development and application of SST-SAS turbulence model in the desider project. In: Advances in hybrid RANS-LES modelling. Berlin, Heidelberg: Springer, 2008, pp.261–270.
ZacharzewskiPSimmonsKJefferson-LovedayR, et al.Evaluation of the SST-SAS model for prediction of separated flow inside turbine internal cooling passages. In: ASME Turbo expo. Seoul, South Korea: ASME, 2016, vol. 5B: Heat Transfer, p.V05BT11A003.
26.
HarrisTA. Rolling bearing analysis. 4th ed. New York: John Wiley and sons, 2001.
27.
HolzerASommerfeldM. New simple correlation formula for the drag coefficient of non-spherical particles. Powder Technol2008; 184: 361–365.
