Aerostatic porous bearings have been applied widely in precision devices to achieve higher accuracy of motion. Conventional aerostatic porous bearings are made of porous graphite, porous ceramics or sintered metal porous material, having a thickness of several millimetres and a surface-restricted layer. However, during mass production of porous bearings, the time required for the production of the porous materials and the surface restriction treatment leads to an increase in the manufacturing time and cost of the porous bearings. Accordingly, to overcome this problem, an aerostatic porous bearing with a layer thickness of several hundred µm and a support member, manufactured using metal 3D printing technology, is proposed. In this study, the optimum conditions for manufacturing the proposed aerostatic porous bearings with a direct metal laser sintering method 3D printer were investigated, and characteristics of the prototype of the proposed bearings were investigated experimentally.
BeckerHI. Air bearing. U.S. Patent 2,627,443, Feb 3, 1953.
2.
BeckerHI. Pressurized bearing. U.S. Patent 2,645,534, July 143, 1953.
3.
WilcoxRM. Air bearing. U.S. Patent 2,683,636, July 13, 1954.
4.
TopanelianEJr. Journal Bearing. U.S. Patent 2,696,410, Dec 7, 1954.
5.
Montgomery AG and Sterry F. A Simple Air Bearing Rotor for Very High Rotational Speeds. Atomic Energy Research Establishment (AERE) Technical Report No. AERE ED/R-1671, Harwell, Berkshire, England, 1955.
6.
Robinson CH and Sterry F. The Static Strength of Pressure Fed Gas Journal Bearings. Atomic Energy Research Establishment (AERE) Technical Report No. AERE ED/R-1672, Harwell, Berkshire, England, 1958.
7.
SheinbergSAShusterVG. Resistance to vibrations of a hydrostatic thrust bearing. Mach Tool1960; 31: 24–29.
8.
SneckHJYenKT. The externally pressurized, porous wall, gas lubricated journal bearing, I. ASLE Trans1964; 7: 288–298.
9.
SneckHJYenKT. The externally pressurized, porous wall, gas lubricated journal bearing, II. ASLE Trans1965; 8: 339–345.
10.
MoriHYabeHOnoT. The theoretical investigation on the externally-pressurized thrust gas-bearing with porous bushing. Bulletin of the JSME1963; 66: 1466–1473.
11.
SunDC. Analysis of the steady state characteristics of gas-lubricated, porous journal bearings. Trans ASME J Lubric Technol1975; 97: 44–51.
12.
SunDC. Stability of gas-lubricated, externally pressurized porous journal bearings. Trans ASME J Lubric Technol1975; 97: 494–505.
13.
EPGargiuloJr. Porous wall gas lubricated journal bearings: theoretical investigation. Trans ASME J Lubric Technol. 1979; 101:458–465
14.
EPGargiuloJr. Porous wall gas lubricated journal bearings: experimental investigation. Trans ASME J Lubric Technol. 1979; 101:466–473
15.
MoriHYabeH. Theoretical investigation of externally pressurized gas-lubricated porous journal bearing with surface-loading effect. Trans ASME J Lubric Technol1973; 101: 195–202.
16.
TogoSOkanoMAkiyamaY. Experimental study on externally pressurized porous gas bearings. J JSLE1972; 17: 360–368.
17.
KawashimaITogoSSatoS,et al.Study on characteristics of porous ceramic gas bearings. Trans JSPE1990; 56: 87–92.
18.
MuskatM. The flow of compressible fluids through porous media and some problems in heat conduction. J Appl Phys1934; 5: 71–94.
19.
YoshimotoSTozukaHDambaraS. Static characteristics of aerostatic porous journal bearings with a surface-restricted layer. Proc Inst Mech Eng Part J J Eng Tribol2003; 217 :125–132.
20.
YoshimotoSKohnoK. Static and dynamic characteristics of aerostatic circular porous thrust bearings (effect of the shape of the air supply area). ASME J Tribol. 2000; 123(3);501–508.
21.
SahaNMajumdarBC. Study of externally-pressurized gas-lubricated two-layered porous journal bearings: a steady state analysis. Proc Inst Mech Eng Part J J Eng Tribol2002; 216: 151–158.
22.
MiyatakeMYoshimotoSSatoJ. Whirling instability of a rotor supported by aerostatic porous journal bearings with a surface-restricted layer. Proc Inst Mech Eng Part J J Eng Tribol2006; 220:95–103.
23.
OtsuYMiyatakeMYoshimotoS. Dynamic characteristics of aerostatic porous journal bearings with a surface-restricted layer. ASME J Tribol2011; 133: 11701-1–11701-10.
24.
QiuCAdkinsNJEAttallahMM. Microstructure and tensile properties of selectively laser-melted and of HIPed laser-melted Ti–6Al–4V. Mater Sci Eng A2013; 578: 230–239.
25.
VilaroTColinCBartoutJD. As-fabricated and heat-treated microstructures of the Ti-6Al-4V alloy processed by selective laser melting. Metall Mater Trans A2011; 42: 3190–3199.
26.
LiRShiYWangZ,et al.Densification behavior of gas and water atomized 316L stainless steel powder during selective laser melting. Appl Surf Sci2010; 256: 4350–4356.
27.
KhairallahSAAndersonATRubenchikA,et al.Laser powder-bed fusion additive manufacturing: physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones. Acta Mater2016; 108: 36–45.
28.
QiuCPanwisawasCWardM,et al.On the role of melt flow into the surface structure and porosity development during selective laser melting. Acta Mater2015; 96: 72–79.
29.
GongHRafiKGuH,et al.Analysis of defect generation in Ti-6Al-4V parts made using powder bed fusion additive manufacturing processes. Addit Manuf2014; 1–4: 87–98.
