This work presents a finite-element model-based study of elastic cylindrical contact. The aim is to evaluate the transition between the plane stress and plane strain-based Hertz solutions when each assumption is most applicable. To accomplish this, a range of curvatures, widths, Poisson’s ratios, and friction coefficients are considered. The finite-element model results for the elastic cylindrical contact cases are compared with the Hertz contact model when assuming plane stress or plane strain. Perhaps, surprisingly, the finite-element model predictions show little dependence on Poisson’s ratio and friction coefficient. The finite-element model predictions of force as a function of deflection agree relatively well with the plane stress Hertz prediction for all cases considered. The finite-element model predictions of contact width as a function of force actually fall below all the analytical Hertz predictions. Therefore, an adapted version of the Hertz equations is provided, which shows better agreement with the cases considered in this work.
KhonsariMMBooserER. Applied tribology: bearing design and lubrication. John Wiley & Sons, 2017.
7.
GreenIEnglishC. Analysis of elastomeric O-ring seals in compression using the finite element method. Tribol Trans1992; 35: 83–88.
8.
WangWLiuHZhuC, et al. Effects of microstructure on rolling contact fatigue of a wind turbine gear based on crystal plasticity modeling. Int J Fatigue2019; 120: 73–86.
9.
AngadiSVJacksonRLChoeSY, et al. A multiphysics finite element model of a 35 A automotive connector including multiscale rough surface contact. J Electron Packag2012; 134: 011001(12 pages).
10.
AngadiSVWilsonWEJacksonRL, et al. A multi-physics finite element model of an electrical connector considering rough surface contact. In: 2008 Proceedings of the 54th IEEE Holm conference on electrical contacts, 27–29 October 2008, Orlando, FL, USA, pp.168–177.
11.
StilsonCLaurvickTCoutuR. Contact resistance evaluation of micro-contacts with upper hemisphere and lower planar or engineered surfaces. In: 2014 IEEE 60th Holm conference on electrical contacts (Holm), 12–15 October 2014, New Orleans, LA, USA, pp.1–8.
12.
JacksonRLGhaedniaHElkadyYA, et al. A closed-form multiscale thermal contact resistance model. IEEE Trans Compon Packag Manuf Technol2012; 2: 1158–1171.
13.
FloresPLeineRGlockerC. Application of the nonsmooth dynamics approach to model and analysis of the contact-impact events in cam-follower systems. Nonlinear Dyn2012; 69: 2117–2133.
14.
LeeHCampbellWDCanningME, et al. Correlation between signalment and the biphasic hyperelastic mechanical properties of equine articular cartilage. Biotribology. 2016; 7: 31–37.
15.
LinDCShreiberDIDimitriadisEK, et al. Spherical indentation of soft matter beyond the Hertzian regime: numerical and experimental validation of hyperelastic models. Biomech Model Mechanobiol2009; 8: 345.
KrithivasanVJacksonRGreenR, et al.Characterization of tire behavior by a finite element method. In: Proceedings of the 28th annual meeting and conference on tire science and technology, 2009, Akron, OH, USA, pp.15–16.
18.
ZhouKWeiR. Modeling cracks and inclusions near surfaces under contact loading. Int J Mech Sci2014; 83: 163–171.
19.
DongQZhouK. Multiple inhomogeneous inclusions and cracks in a half space under elastohydrodynamic lubrication contact. Int J Appl Mech2015; 7: 1550003.
20.
GhaedniaHWangXSahaS, et al. A review of elastic–plastic contact mechanics. Appl Mech Rev2017; 69: 060804.
21.
BeheshtiAKhonsariMM. Asperity micro-contact models as applied to the deformation of rough line contact. Tribol Int2012; 52: 61–74.
22.
XuYJacksonRL. Statistical models of nearly complete elastic rough surface contact-comparison with numerical solutions. Tribol Int2017; 105: 274–291.
23.
DongQYangJWangX, et al. Heterogeneous structures with inhomogeneous inclusions under elastohydrodynamic lubrication contact with consideration of surface roughness. Proc IMechE, Part J: J Engineering Tribology2016; 230: 571–582.
JacksonRLGreenI. On the modeling of elastic contact between rough surfaces. Trib Trans2011; 54: 300–314.
26.
YastrebovVAAnciauxGMolinariJ-F. On the accurate computation of the true contact-area in mechanical contact of random rough surfaces. Tribol Int2017; 114: 161–171.
27.
ArgatovIIChaiYS. Wear contact problem with friction: steady-state regime and wearing-in period. Int J Solids Struct2020; 193–194: 213–221.
28.
YangHGreenI. Fretting wear modeling of cylindrical line contact in plane-strain borne by the finite element method. J Appl Mech2019; 86: 061012.
29.
YangHGreenI. A fretting finite element investigation of a plane-strain cylindrical contact of Inconel 617/Incoloy 800H at room and high temperatures. Proc IMechE, Part J: J Engineering Tribology2019; 233: 553–569.
30.
GreenI. Poisson ratio effects and critical values in spherical and cylindrical Hertzian contacts. Int J Appl Mech Eng2005; 10: 451–462.
31.
JacksonRL. A solution of rigid perfectly plastic cylindrical indentation in plane strain and comparison to elastic-plastic finite element predictions with hardening. J Appl Mech2017; 85: 024501–024506.
32.
VijaywargiyaRGreenI. A finite element study of the deformation, forces, stress formation, and energy loss in sliding cylindrical contacts. Int J Non-Linear Mech2007; 42: 914–927.
33.
CinarASinclairGB. Quasi-static normal indentation of an elasto-plastic half-space by a rigid circular cylinder of infinite length. Int J Solids Struct1986; 22: 919–934.
34.
DumasGBaronetCN. Elastoplastic indentation of a half-space by an infinitely long rigid circular cylinder. Int J Mech Sci1971; 13: 519–530.
35.
SharmaAJacksonRL. A finite element study of an elasto-plastic disk or cylindrical contact against a rigid flat in plane stress with bilinear hardening. Tribol Lett2017; 65: 112.
36.
HertzH. Über die Berührung fester elastischer Körper. J Reine Angew Math1882; 92: 156–171.
37.
ArgatovII. Solution of the plane Hertz problem. J Appl Mech Tech Phys2001; 42: 1064–1072.
38.
NakhatakyanF. Precise solution of Hertz contact problem for circular cylinders with parallel axes. Russian Eng Res2011; 31: 193–196.
39.
DinnickAN. Udar i szhatie uprugikh tel: Izbrannye trudy [Impact and compression of elastic bodies: Selected works]. Т1, Kiev: AN USSR Publ., 1952.
