Installation error is one of the most prominent factors affecting the lubrication of face gear. To analyze the lubrication performance of the face gear with installation errors, the installation error model of the orthogonal face gear transmission system is established. Then, the contact path, equivalent curvature radius, load distribution and entrainment velocity are studied using the face gear loaded tooth contact analysis (LTCA). On this basis, the lubrication governing equations of the face gear are established according to the elastohydrodynamic lubrication (EHL) theory. In addition, the oil film thickness, oil film pressure and coefficient of friction in the process of face gear drives are calculated using the method of progressive mesh densification (PMD). Finally, the effects of axis intersection angle error, axis intersection error and axial displacement error on lubrication characteristics are analyzed. The results reveal that when the axial intersection angle error and axial displacement error are negative and the axial intersection error is positive, the minimum oil film thickness of the face gear tooth surface is less than that without error. When the error values are the same, the minimum oil film thickness and coefficient of friction have larger changes with the axial displacement error than with the axis intersection error, and the contact path has a bigger movement range.
KrantzTKishJ. Advanced rotorcraft transmission (ART) program summary. 28th Joint Propulsion Conference and Exhibit1992: 3365.
3.
LenskiJW. Advanced Rotorcraft Transmission Program (ART). Boeing Defense And Space Group Philadelphia Pa Helicopters Div1995.
4.
LenskiJWValcoMJ. Advanced rotorcraft transmission (ART) program-boeing helicopters status report. National Aeronautics and Space Administration Cleveland Oh Lewis Research Center1991; 10.
5.
ZhouWZhuRLiuW,et al.An improved dynamic transmission error model applied on coupling analysis of gear dynamics and elastohydrodynamic lubrication. J Tribol2022; 144: 051601.
6.
ShiXSunWLuX, et al.Three-dimensional mixed lubrication analysis of spur gears with machined roughness. Tribol Int2019; 140: 105864.
7.
ClarkeAJamaliHUSharifKJ, et al.Effects of profile errors on lubrication performance of helical gears. Tribol Int2017; 111: 184–191.
8.
ZhouCJiangXSuJ, et al.Injection lubrication for high-speed helical gears using the overset mesh method and experimental verification. Tribol Int2022; 173: 107642.
9.
CaoWPuWWangJ,et al.Effect of contact path on the mixed lubrication performance, friction and contact fatigue in spiral bevel gears. Tribol Int2018; 123: 359–371.
10.
WangZPuWPeiX,et al.Nonlinear dynamical behaviors of spiral bevel gears in transient mixed lubrication. Tribol Int2021; 160: 107022.
11.
DaiYMaFZhuX, et al.Evaluation and optimization of the oil jet lubrication performance for orthogonal face gear drive: modelling, simulation and experimental validation. Energies2019; 12: 1935.
12.
OuyangBMaFDaiY,et al.Numerical analysis on heat-flow-coupled temperature field for orthogonal face gears with oil–jet lubrication. Engineering Applications of Computational Fluid Mechanics2021; 15: 762–780.
13.
Li L and Zhu R. The analysis of elastohydrodynamics lubrication in face gear. Mechanical Engineer 2007; 2: 63–65.
14.
HamrockBJDowsonD. Isothermal elastohydrodynamic lubrication of point contacts: part III—fully flooded results. 1977.
15.
WangYWuCTangW, et al.Analysis on isothermal elastohydrodynamic lubrication of orthogonal face gear. Tribol Trans2012; 55: 863–871.
16.
WuC. Characteristic analysis on elastohydrodynamic lubrication of orthogonal face-gear. Advanced Materials Research: Trans Tech Publ2014; 912-914: 598–604.
17.
WangGFanWShenY. Elastohydrodynamic lubrication analysis of point contact grease lubrication in oscillating face gear transmission. J Dalian Jiaotong Univ2021; 6: 68–75.
18.
LiZZhuR. LTCA Analysis of orthogonal face gears based on hertzian solution. Proceedings of the Thirteenth Academic Conference on Mechanical Power Transmission of Chinese Aeronautical Society2007: 134–142.
19.
ZhaoNGuoHFangZ, et al.Loaded tooth contact analysis of modified helical face gears. In: Global design to gain a competitive edge: an holistic and collaborative design approach based on computational tools. Springer, 2008, pp.345–354.
20.
WangYWuCGongK, et al.Loaded tooth contact analysis of orthogonal face-gear drives. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science2012; 226: 2309–2319.
21.
FuXFangZJiaC,et al.Mesh stiffness analysis and modification vibration reduction optimization of face gear transmission. Journal of Vibration and Shock2019; 38: 265–272.
22.
ZhuD. On some aspects of numerical solutions of thin-film and mixed elastohydrodynamic lubrication. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology2007; 221: 561–579.
23.
PuWWangJZhouG, et al.Asymptotic grid refinement algorithm for elastohydrohydrodynamic lubrication with entrainment velocity direction forming an angle with the minor axis of the ellipse. Journal of Xi'an Jiaotong University2014; 48: 95–100.
24.
ZhuR. Research on meshing characteristics of face gear transmission. Dissertation for the Doctoral Degree. Nanjing: Nanjing University of Aeronautics and Astronautics, 2000.
25.
ZhouWZhuRLiZ, et al.Theoretical and experimental research on tooth root bending stress of face gear. Proceedings of the Institution of Mechanical Engineers Part C, Journal of mechanical engineering science2024; 02.
RoelandsCJ. Correlational aspects of viscosity-temperature-pressure relationship of lubricating oils. Netherlands: University of Groningen. dissertation, 1966.
ZhangQ. Research on microelastic hydrodynamic lubrication performance of helical gear modification. Dissertation for the Master Degree. Nanjing: Nanjing University of Aeronautics and Astronautics, 2018.
30.
YangP. Numerical analysis of fluid lubrication. Beijing: National Defense Industry Press, 1998.
31.
TemirkhanMAmrinASpitasV,et al.Convergence and accuracy problems of the conventional TCA model – critical analysis and novel solution for crowned spur gears. Proceedings of the Institution of Mechanical Engineers Part C, Journal of Mechanical Engineering Science2024; 238: 724–736.
32.
FengGXieZZhouM. Geometric design and analysis of face-gear drive with involute helical pinion. Mech Mach Theory2019; 134: 169–196.
33.
PengXZhouJ. Optimization design for dynamic characteristics of face gear drive with surface-active modification. Mech Mach Theory2022; 176: 105007.
34.
TemirkhanMTariqHBSpitasV,et al.Parametric design of straight bevel gears based on a new tooth contact analysis model. Arch Appl Mech2023; 93: 4181–4196.
