The impact of thermal mass on cold and hot climate zones of Portugal

Abstract

The aim of this paper is focused on the energy performance of buildings containing massive wall alternatives. The analysis comprised the comparison of the heating and cooling loads of seven characteristic wall configurations of one sample building with different dynamic internal heat capacity (ISO 13790:2008) in spite of the equal thermal resistance. The equal thermal resistance, as derived from simple steady-state condition, was imposed in order to allow research of effects solely attributed to the wall heat capacity on the building performance. A detached one floor dwelling exposed to different climate conditions in Portugal was analysed to illustrate the effect of the same wall in terms of energy demand during cold and hot weather conditions. A whole building dynamic modelling using EnergyPlus was employed for the energy analysis. The best thermal performance was obtained with massive walls that were located at the inner side, for a very heavy weight building and high building time constant.

Keywords

Building simulation Thermal performance Temperatures Thermal mass Passive design Heating and cooling loads

Get full access to this article

View all access options for this article.

References

Tsilingiris

. The influence of heat capacity and its spatial distribution on the transient wall thermal behavior under the effect of harmonically time-varying driving forces. Build Environ 2006; 41(5): 590–601.

Di Perna

Stazi

Casalena

D’Orazio

. Influence of the internal inertia of the building envelope on summertime comfort in buildings with high internal heat loads. Energy Build 2011; 43(1): 200–206.

ISO 13786:2007. Thermal performance of building components — dynamic thermal characteristics — calculation methods, Geneva, Switzerland: International Organization for Standardization, 2007.

Tsilingiris

. Parametric space distribution effects of wall heat capacity and thermal resistance on the dynamic thermal behavior of walls and structures. Energy Build 2006; 38(10): 1200–1211.

Karlsson

Wadsö

Öberg

. A conceptual model that simulates the influence of thermal inertia in building structures. Energy Build 2013; 60: 146–151.

Zhou

Zhang

Lin

. Coupling of thermal mass and natural ventilation in buildings. Energy Build 2008; 40(6): 979–986.

Rossi

Rocco

. External walls design: the role of periodic thermal transmittance and internal areal heat capacity. Energy Build 2014; 68: 732–740.

Asan

. Effects of wall’s insulation thickness and position on time lag and decrement factor. Energy Build 1998; 28(3): 299–305.

Chvatal

KMS

Corvacho

. The impact of increasing the building envelope insulation upon the risk of overheating in summer and an increased energy consumption. J Build Perform Simul 2009; 2(4): 267–282.

10.

Asan

. Investigation of wall’s optimum insulation position from maximum time lag and minimum decrement factor point of view. Energy Build 2000; 32(2): 197–203.

11.

Simões

Tadeu

. Thermal delay simulation in multilayer systems using analytical solutions. Energy Build 2012; 49: 631–639.

12.

Zhu

Hurt

Correia

Boehm

. Detailed energy saving performance analyses on thermal mass walls demonstrated in a zero energy house. Energy Build 2009; 41(3): 303–310.

13.

Orosa

Oliveira

. A field study on building inertia and its effects on indoor thermal environment. Renew Energy 2012; 37(1): 89–96.

14.

ISO 13790:2008. Energy performance of buildings — calculation of energy use for space heating and cooling, Geneva, Switzerland: International Organization for Standardization, 2008.

15.

BS EN 832:2000. Thermal performance of buildings - calculation of energy use for heating - residential buildings, London, England: British Standards Institution, 2000.

16.

Yao

Yan

. Effects of solar absorption coefficient of external wall on building energy consumption. World Acad Sci Eng Technol 2011; 76: 758–760.

17.

Goulding

Lewis

Steemers

Commission of the European Communities, Directorate-General for Science R and Development . Energy in architecture: the European passive solar handbook, London, England: B.T. Batsford for the Commission of the European Communities, Directorate General XII for Science, Research and Development, 1992.

18.

U.S. Department of Energy Building Technologies Office. EnergyPlus energy simulation software, http://apps1.eere.energy.gov/buildings/energyplus/ (accessed January 2015).

19.

Carlos

. Simulation assessment of living wall thermal performance in winter in the climate of Portugal. Build Simul 2015; 8(1): 3–11.

20.

Asdrubali

Cotana

Messineo

. On the evaluation of solar greenhouse efficiency in building simulation during the heating period. Energies 2012; 5(12): 1864–1880.

21.

Energy Efficiency & Renewable Energy. Weather data files, http://energy.gov/eere/buildings/building-technologies-office (accessed January 2015).

22.

Jin

Zhang

Cao

Wang

. Thermal performance evaluation of the wall using heat flux time lag and decrement factor. Energy Build 2012; 47: 369–374.

23.

Szokolay

. Introduction to architectural science: the basis of sustainable design, Amsterdam, The Netherlands: Elsevier/Architectural Press, 2008.

24.

Kalogirou

Florides

Tassou

. Energy analysis of buildings employing thermal mass in Cyprus. Renew Energy 2002; 27(3): 353–368.