In this study, a lightweight residential building in Greece was investigated, focusing on the summer comfort when wallboards with phase change materials (PCM) were installed in the external and internal walls. The effectiveness of the PCM wallboards installed was numerically assessed, while the energy performance of the building was examined, in order to quantify the effect of PCM in the annual cooling load needs, as a way of saving energy. Potential bigger energy savings were evaluated by defining the appropriate PCM melting temperature range and the ‘energy-conscious’ occupant behaviour (passive vs. active). Results were expressed in terms of percentage savings of cooling loads and with comparison to wall elements incorporated with plain gypsumboards instead of the PCM wallboards. The optimum phase change temperature change for the specific location was investigated by examining two-phase change transition temperatures of the PCM wallboards (PCM24 and PCM26 respectively). The use of PCM24 produced a 29% reduction of annual cooling loads, compared to 16% reduction produced by PCM26. Five scenarios were also examined, showing the behaviour of the PCM which was enhanced when a cooling system was installed. The cooling needs were lowered by an average of 25.7%, compared to the respective no-PCM scenarios.
TelkesM. Review of solar house heating. Heat Vent1949; 46(9): 68–74.
2.
TelkesM. Storing solar heat in chemicals. Heat Vent1949; 46(11): 79–86.
3.
Chahroudi D and Wellesley-Miller S. Thermoconcrete heat storage materials: applications and performance specifications. In: Boer KW (ed.) Proceedings of joint conference on sharing the sun: solar technology in the seventies, American Section, International Solar Energy Society and Solar Energy Society of Canada, Winnipeg, USA, August 15–20 1976; Vol. 3, pp. 245–259.
4.
TyagiVVBuddhiD. PCM thermal storage in buildings: a state of art. Renew Sust Energ Rev2007; 11: 1146–1166.
5.
ZalbaBMarínJMCabezaLFMehlingH. Review on thermal energy storage with phase change: materials, heat transfer analysis and applications. Appl Therm Eng2003; 23: 251–283.
6.
ZhangYZhouGLinKZhangQDiH. Application of latent heat thermal energy storage in buildings: state-of-the-art and outlook. Build Environ2007; 42: 2197–2209.
7.
SoaresNCostaJJGasparARSantosP. Review of passive PCM latent heat thermal energy storage systems towards buildings’ energy efficiency. Energ Build2013; 59: 82–103.
8.
ZhuNMaZWangS. Dynamic characteristics and energy performance of buildings using phase change materials: a review. Energ Convers Manage2009; 50: 3169–3181.
9.
Behzadi S and Farid MM. Energy storage for efficient energy utilization in buildings. In: First international high performance buildings conference, Purdue University, W. Lafayette, IN, USA, July 12–15, 2010; Paper 6, pp. 3178–3186, http://docs.lib.purdue.edu/ihpbc/6 (accessed 29 March 2016).
10.
AhmadMBontempsASalléeHQuenardD. Thermal testing and numerical simulation of a prototype cell using light wallboards coupling vacuum isolation panels and phase change material. Energ Build2006; 38: 673–681.
11.
Schranzhofer H, Puschnig P, Heinz A and Streicher W. Validation of a TRNSYS simulation model for PCM energy storages and PCM wall construction elements. In: Ecostock — 10th International conference on thermal energy storage, Richard Stockton College, New Jersey, USA, May 31 to June 2, 2006; Paper 11B4, http://intraweb.stockton.edu/eyos/energy_studies/content/docs/FINAL_PAPERS/11B-4.pdf (accessed 29 March 2016).
12.
KuznikFVirgoneJJohannesK. Development and validation of a new TRNSYS type for the simulation of external building walls containing PCM. Energ Build2010; 42: 1004–1009.
13.
Romero-SánchezMDGuillem-LópezCLópez-BuendíaAMStamatiadouMMandilarasIKatsourinisDFountiM. Treatment of natural stones with Phase Change Materials: Experiments and computational approaches. Appl Therm Eng2012; 48: 136–143.
14.
AthienitisAKLiuCHawesDBanuDFeldmanD. Investigation of the thermal performance of a passive solar test-room with wall latent heat storage. Build Environ1997; 32: 405–410.
15.
DiaconuBMCruceruM. Novel concept of composite phase change material wall system for year-round thermal energy savings. Energ Build2010; 42: 1759–1772.
16.
ZwanzigSDLianYBrehobEG. Numerical simulation of phase change material composite wallboard in a multi-layered building envelope. Energ Convers Manage2013; 69: 27–40.
17.
SchossigPHenningHGschwanderSHaussmannT. Micro-encapsulated phase-change materials integrated into construction materials. Sol Energ Mat Sol C2005; 89: 297–306.
18.
KuznikFVirgoneJJohannesK. In-situ study of thermal comfort enhancement in a renovated building equipped with phase change material wallboard. Renew Energ2011; 36: 1458–1462.
19.
AhmadMBontempsASalléeHQuenardD. Experimental investigation and computer simulation of thermal behaviour of wallboards containing a phase change material. Energ Build2006; 38: 357–366.
20.
YahayaNAAhmadH. Numerical investigation of indoor air temperature with the application of PCM gypsum board as ceiling panels in buildings. Procedia Eng2011; 20: 238–248.
21.
CastellAMartorellIMedranoMCabezaLF. Experimental study of using PCM in brick constructive solutions for passive cooling. Energ Build2010; 42: 534–540.
22.
ManzHEgolfPWSuterPGoetzbergerA. TIM–PCM external wall system for solar space heating and daylighting. Sol Energ1997; 61: 369–379.
23.
BaetensRJelleBPGustavsenA. Phase change materials for building applications: a state-of-the-art review. Energ Build2010; 42: 1361–1368.
24.
Stetiu C and Feustel HE. Phase-change wallboard and mechanical night ventilation in commercial buildings. Berkeley, CA: Lawrence Berkeley National Laboratory, 1998, http://www-epb.lbl.gov/thermal/docs/pcm2.pdf (accessed 29 March 2016).
25.
IsmailKARCastroJNC. PCM thermal insulation in buildings. Int J Energ Res1997; 21: 1281–1296.
26.
PeippoKKauranenPLundPD. A multicomponent PCM wall optimized for passive solar heating. Energ Build1991; 17: 259–270.
27.
Izquierdo-BarrientosMABelmonteJFRodríguez-SánchezDMolinaAEAlmendros-IbanezJA. A numerical study of external building walls containing phase change materials (PCM). Appl Therm Eng2012; 47: 73–85.
28.
Muruganantham K, Phelan P, Horwath P, Ludlam D and McDonald T. Experimental investigation of a bio-based phase change material to improve building energy performance. In: Proceedings of 4th international conference on energy sustainability, Phoenix, AZ, USA, May 17–22, 2010; pp. 979–984. New York: ASME.
29.
MandilarasIStamatiadouMKatsourinisDZannisGFountiM. Experimental thermal characterization of a Mediterranean residential building with PCM gypsum board walls. Build Environ2013; 61: 93–103.
30.
SajjadianSMLewisJSharplesS. The potential of phase change materials to reduce domestic cooling energy loads for current and future UK climates. Energ Build2015; 93: 83–89.
31.
KimTAhnSLeighSB. Energy consumption analysis of a residential building with phase change materials under various cooling and heating conditions. Indoor Built Environ2014; 23: 730–741.
Katsourinis D, Founti M, Romero-Sánchez MD and Lopez-Buendia AM. On the computational modelling of thermal energy storage in natural stone treated with PCMs. In: Proceedings of 9th IIR conference on phase change materials and slurries for refrigeration and air conditioning. IIR Proceedings Series “Refrigeration Science and Technology”, Sofia, Bulgaria, September 29 to October 1, 2010.
35.
KravvaritisEDAntonopoulosKATzivanidisC. Experimental determination of the effective thermal capacity function and other thermal properties for various phase change materials using the thermal delay method. Appl Energ2011; 88: 4459–4469.
AscioneFBiancoNDe MasiRFDe RossiFVanoliGP. Energy refurbishment of existing buildings through the use of phase change materials: energy savings and indoor comfort in the cooling season. Appl Energ2014; 113: 990–1007.
38.
KalnæsSEJelleBP. Phase change materials and products for building applications: a state-of-the-art review and future research opportunities. Energ Build2015; 94: 150–176.
39.
StaziFBonfigliCTomassoniEDi PernaCMunafoP. The effect of high thermal insulation on high thermal mass: Is the dynamic behaviour of traditional envelopes in Mediterranean climates still possible?Energ Build2015; 88: 367–383.
40.
Stamatiadou M, Katsourinis D, Founti M and Antonopoulos K. Investigation of natural ventilation impact on the effectiveness of PCM boards installed in a Mediterranean Residential Building. In: Proceedings of the 2nd international conference on sustainable energy storage in buildings, Dublin, Ireland, June 19–21, 2013; pp. 252–255.
