Indoor air distribution in a room with underfloor air distribution and chilled ceiling: Effect of ceiling surface temperature and supply air velocity

Abstract

An underfloor air distribution (UFAD) system integrated with a chilled ceiling (CC) cooling system may be a potential advanced heating, ventilation and air conditioning system in modern non-residential buildings with high sensible cooling loads. This article presents an experimental study concerning the effect of ceiling surface temperature and supply air velocity on the indoor air distribution in a room with UFAD as the internal and external sensible cooling loads change. The vertical distributions of indoor air temperature, air velocity and contaminant (CO₂) concentration were evaluated by vertical air temperature difference (VATD), turbulence intensity (TI) and contaminant removal effectiveness (CRE), respectively. The results showed that the average VATD, TI and CRE levels were 0.5°C–1.0°C, 31%–41% and 0.85–1.06 when both internal and external sensible cooling loads were 41.5 W/m². These evaluation indices varied clearly when the external sensible cooling load increased from 41.5 W/m² to 69.5 W/m², whereas they remained almost the same when the internal sensible cooling load increased from 41.5 W/m² to 69.5 W/m². The maximum TI coincided with the minimum CRE under the condition of a constant sensible cooling load. Moreover, an air diffusion performance index clearly reduced with an increase in the heat removal effectiveness. It is recommended that it is important to balance the indoor air quality and energy consumption in a room with UFAD + CC.

Keywords

Underfloor air distribution Chilled ceiling Indoor air distribution Thermal environment

Get full access to this article

View all access options for this article.

References

Bauman

Daly

Underfloor air distribution design guide. Atlanta: American Society of Heating, Refrigerating and Air-Conditioning Engineering, Inc, 2003.

Lim

Schaefer

Kim

Energy benefit of the underfloor air distribution system for reducing air-conditioning and heating loads in buildings. Indoor Built Environ 2012; 21: 62–67.

Alajmi

Abou-Ziyan

El-Amer

Energy analysis of under-floor air distribution (UFAD) system: an office building case study.

Energy Convers Manag 2013; 73: 78–85.

Alajmi

Baddar

Bourisli

RI.

Thermal comfort assessment of an office building served by under-floor air distribution (UFAD) system – a case study. Build Environ 2015; 85: 153–159.

Schiavon

Bauman

Tully

Rimmer

Room air stratification in combined chilled ceiling and displacement ventilation systems. HVAC & R Res 2012; 18: 147–159.

Kim

Schaefer

Lim

Kim

JT.

Thermal comfort prediction of an underfloor air distribution system in a large indoor environment. Energ Build 2013; 64: 323–331.

Schiavon

Bauman

Tully

Rimmer

Chilled ceiling and displacement ventilation system: Laboratory study with high sensible cooling load. HVAC & R Res 2015; 21: 944–956.

Wang

Lian

Discussion on application of a combined chilled ceiling and underfloor air supply system in an office building. Refrigeration Technol 2008; 4: 21–26. (In Chinese)

Raftery

Lee

Webster

Performance analysis of an integrated UFAD and radiant hydronic slab system. Appl Energ 2012; 90: 250–257.

10.

Cao

Ren

Ventilation control strategy using low-dimensional linear ventilation models. Build Environ 2018; 144: 316–333.

11.

Lin

YJP

Linden

PF.

A model for an underfloor air distribution system. Energ Build 2005; 37: 399–409.

12.

Liu

Linden

PF.

The fluid dynamics of an underfloor air distribution system. J Fluid Mech 2006; 554: 323–341.

13.

Rees

Haves

An experimental study of air flow and temperature distribution in a room with displacement ventilation and a chilled ceiling. Build Environ 2013; 59: 358–368.

14.

Hodder

Loveday

Parsons

Taki

AH.

Thermal comfort in chilled ceiling and displacement ventilation environments: vertical radiant temperature asymmetry effects. Energ Build 1998; 27: 167–173.

15.

Loveday

Parsons

Hodder

Chilled ceiling and displacement ventilation environments: airflow, radiant asymmetry and thermal comfort effects. Abingdon: Conference of Sustainable Building,1997

16.

Rees

Haves

A nodal model for displacement ventilation and chilled ceiling systems in office spaces. Build Environ 2001; 36: 753–762.

17.

Schiavon

Rim

Pasut

Nazaroff

Sensation of draft at uncovered ankles for women exposed to displacement ventilation and underfloor air distribution systems. Build Environ 2016; 96: 228–236.

18.

Wang

Long

Difference between Underfloor air distribution & displacement ventilation. Build Energ Environ 2004; 12: 123–128. (In Chinese)

19.

Huan

Wang

Lin

Wang

ZH.

An experimental investigation into stratum ventilation for the cooling of an office with asymmetrically distributed heat gains. Build Environ 2016; 110: 76–88.

20.

Mustakallio

Kosonen

Melikov

The effects of mixing air distribution and heat load arrangement on the performance of ceiling radiant panels under cooling mode of operation. Sci Technol Built Environ 2016; 1: 1–15.

21.

Mustakallio

Bolashikov

Kostov

Melikov

Kosonen

Thermal environment in simulated offices with convective and radiant cooling systems under cooling (summer) mode of operation. Build Environ 2016; 100: 82–91.

22.

Kumar

Memon

Ali

Nord

Parametric study of condensation at heating, ventilation, and air-conditioning duct's external surface. Build Serv Eng Res Technol 2018; 39: 328–334.

23.

Kumar

Memon

Ali

Junejo

Critical analysis of the condensation of water vapor at external surface of the duct. Heat Mass Transfer 2018; 54: 1937–1950.

24.

Rhee

Kim

KW.

A 50 year review of basic and applied research in radiant heating and cooling systems for the built environment. Build Environ 2015; 91: 166–190.

25.

ISO 7730:2005. Ergonomics of the thermal environment – analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria. Brussels: European Committee for Standardization (CEN), 2005.

26.

Melikov

AK.

Local thermal discomfort due to draft and vertical temperature difference in rooms with displacement ventilation. ASHRAE Trans 1989; 95: 1050–1057.

27.

Mundt

Mathisen

Nielsen

Moser

Ventilation effectiveness. Brussels: Rehva Guidebook, 2004.

28.

ASHRAE Standard 62.1-2016. Ventilation for acceptable indoor air quality. Atlanta: American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc, 2016.

29.

Cao

Meyers

Influence of turbulent boundary conditions on RANS simulations of contaminant dispersion in mechanically ventilated enclosures with transitional slot Reynolds number. Build Environ 2013; 59: 397–407.

30.

Cao

Cen

Zhang

Feng

Study on the impacts of human walking on indoor particles dispersion using momentum theory method. Build Environ 2017; 126: 195–206.

31.

Deng

Feng

Cao

Influence of air change rates on indoor CO₂ stratification in terms of Richardson number and vorticity. Build Environ 2018; 129C: 74–84.

32.

Zhou

Deng

Cao

The effects of ventilation and floor heating systems on the dispersion and deposition of fine particles in an enclosed environment. Build Environ 2017; 125: 192–205.