Computational fluid dynamics modelling of the visible light photocatalytic oxidation process of toluene for indoor building materials with locally doped titanium dioxide
Restricted accessResearch articleFirst published online February, 2020
Computational fluid dynamics modelling of the visible light photocatalytic oxidation process of toluene for indoor building materials with locally doped titanium dioxide
Computational fluid dynamics (CFD) is one of the promising methods that can precisely predict non-uniform air flow and contaminant distribution in indoor environments. The overarching objective of this study was to develop a mathematical model for describing the photocatalytic oxidation (PCO) reaction mechanism of gas phase toluene with titanium dioxide (TiO2)-bound indoor building materials. This mathematical model was developed based on Langmuir-Hinshelwood type kinetics and for the integration with CFD simulations as a wall surface boundary condition. The effects of gas phase toluene concentration, illuminance and humidity on the toluene oxidation reaction were considered with locally TiO2-doped building materials. Especially, humidity dependence was explicitly integrated as a competitive adsorption model between toluene and water vapour. Moreover, surface compositions of TiO2 and the substrate (ceramic tile in this study), and the physical adsorption properties of those materials, were modelled and integrated into the mathematical model. A 0.02 m3 chamber experiment and adsorption isotherm measurements were conducted to identify the model parameters. CFD analysis was carried out according to experimental scenarios, and an optimization procedure for the model parameters was proposed for their application as the boundary conditions in the CFD analysis.
WargockiPWyonDPSundellJClausenGFangerPO.The effects of outdoor air supply rate in an office on perceived air quality, sick building syndrome (SBS) symptoms and productivity. Indoor Air2000;
10: 222–263.
2.
SuehiroKSuehiroNMasudaYItoKItoK.Folded roof house – design solution to optimize environmental conditions using generic equipment and techniques. Jpn Architect Rev2018;
1: 18–23.
3.
YuBFHuZBLiuMYangHLKongQXLiuYH.Review of research on air-conditioning systems and indoor air quality control for human health. Int J Refrig2009;
32: 3–20.
4.
YuCWFKimJT.Building pathology, investigation of sick buildings – VOC emissions. Indoor Built Environ2010;
19: 30–39.
5.
YuCWFKimJT.Material emissions and indoor simulation: indoor.Indoor Built Environ2013;
22: 21–29.
6.
YuCWFKimJT.Photocatalytic oxidation for maintenance of indoor environmental quality. IndoorBuilt Environ2013;
22: 39–51.
7.
FujishimaAHondaK.Electrochemical photolysis of water at a semiconductor electrode. Nature1972;
238: 37–38.
8.
HussainMCeccarelliRMarchisioDLFinoDRussoNGeobaldoF.Synthesis, characterization, and photocatalytic application of novel TiO2 nanoparticles. Chem Eng J2011;
166: 138–149.
ZhouWLiuHWangJLiuDDuGCuiJ.Ag2O/TiO2 nanobelts heterostructure with enhanced ultraviolet and visible photocatalytic activity. ACS Appl Mater Interfaces2010;
2: 2385–2392.
11.
FarhanianDHaghighatF.Photocatalytic oxidation air cleaner: identification and quantification of by-products. Build Environ2014;
72: 34–43.
12.
ZhaoJYangX.Photocatalytic oxidation for indoor air purification: a literature review. Build Environ2003;
38: 645–654.
13.
HüskenGHungerMBrouwersH.Experimental study of photocatalytic concrete products for air purification. Build Environ2009;
44: 2463–2474.
14.
ZhongLHaghighatF.Photocatalytic air cleaners and materials technologies – abilities and limitations. Build Environ2015;
91: 191–203.
15.
ShayeganZLeeCSHaghighatF.TiO2 photocatalyst for removal of volatile organic compounds in gas phase – a review. Chem Eng J2018;
334: 2408–2439.
16.
BoyjooYSunHLiuJPareekVKWangS.A review on photocatalysis for air treatment: from catalyst development to reactor design. Chem Eng J2017;
310: 537–559.
17.
van WalsemJRoegiersJModdeBLenaertsSDenysS.Integration of a photocatalytic multi-tube reactor for indoor air purification in HVAC systems: a feasibility study. Environ Sci Pollut Res2018;
25: 18015–18026.
18.
YuBJiangQHeWLiuSZhouFJiJXuGChenH.Performance study on a novel hybrid solar gradient utilization system for combined photocatalytic oxidation technology and photovoltaic/thermal technology. Appl Energ2018;
215: 699–716.
19.
YuBHouJHeWLiuSHuZJiJXuG.Study on a high-performance photocatalytic-Trombe wall system for space heating and air purification. Appl Energ2018;
226: 365–380.
20.
ZhongLBranchoJJBattermanSBartlettBMGodwinC.Experimental and modeling study of visible light responsive photocatalytic oxidation (PCO) materials for toluene degradation. Appl Catal B – Environ2017;
216: 122–132.
21.
BinasVVenieriDKotziasDKiriakidisG.Modified TiO2 based photocatalysts for improved air and health quality. J Materiomics2017;
3: 3–16.
22.
ZhanSYangYGaoXYuHYangSZhuDLiY.Rapid degradation of toxic toluene using novel mesoporous SiO2 doped TiO2 nanofibers. Catal Today2014;
225: 10–17.
23.
BartolomeiVDelabySBoutryDNicolasM. Impact of photocatalytic building products on indoor air quality under visible light conditions. In: Indoor Air 2016, the 14th international conference on indoor air quality and climate, Ghent, Belgium, July 3–8 2016, Paper ID 655.
24.
ZhangYWangDZhangG.Photocatalytic degradation of organic contaminants by TiO2/sepiolite composites prepared at low temperature. Chem Eng J2011;
173: 1–10.
25.
WuMCWuPYLinTHLinTF.Photocatalytic performance of Cu-doped TiO2 nanofibers treated by the hydrothermal synthesis and air-thermal treatment. Appl Surf Sci2018;
430: 390–398.
26.
FengZYuCWCaoSJ.Fast prediction for indoor environment: models assessment. Indoor Built Environ2019;
28: 727–730.
27.
YuQLBallariMMBrouwersH.Indoor air purification using heterogeneous photocatalytic oxidation. Part II. Kinetic study. Appl Catal B: Environ2010;
99: 58–65.
28.
CoronadoJMZornMETejedor-TejedorI.Photocatalytic oxidation of ketones in the gas phase over TiO2 thin films: a kinetic study on the influence of water vapor. Appl Catal B: Environ2003;
43: 329–344.
29.
DavisMEDavisRJ.Fundamentals of chemical reaction engineering.
New York:
McGraw-Hill, 2003.
30.
VincentGSchaerEMarquairePM.CFD modelling of an annular reactor, application to the photocatalytic degradation of acetone. Process Saf Environ Protect2011;
899: 35–40.
31.
PassalíaCAlfanoOMBrandiRJ.A methodology for modeling photocatalytic reactors for indoor pollution control using previously estimated kinetic parameters. J Hazard Mater2012;
211–212: 357–365.
32.
WangZLiuJDaiYDongWZhangSChenJ.CFD modeling of a UV-LED photocatalytic odor abatement process in a continuous reactor. J Hazard Mater2012;
215–216: 25–31.
33.
PassalíaCAlfanoOMBrandiRJ.Modeling and experimental verification of a corrugated plate photocatalytic reactor using computational fluid dynamics. Ind Eng Chem Res2011;
50: 9077–9086.
34.
ChongSWangSTadéMAngHMPareekV.Simulations of photodegradation of toluene and formaldehyde in a monolith reactor using computational fluid dynamics. AIChE J2011;
57: 724–734.
35.
DuranJEMohseniMTaghipourF.Design improvement of immobilized photocatalytic reactors using a CFD-Taguchi combined method. Ind Eng Chem Res2011;
50: 824–831.
36.
DennyFScottJPareekVPengGDAmalR.CFD modelling for a TiO2-coated glass-bead photoreactor irradiated by optical fibres: photocatalytic degradation of oxalic acid. Chem Eng Sci2009;
64: 1695–1706.
37.
DuranJEMohseniMTaghipourF.Modelling of annular reactors with surface reaction using computational fluid dynamics. Chem Eng Sci2010;
65: 1201–1211.
38.
Salvadó-EstivillIHargreavesDMPumaGL.Evaluation of the intrinsic photocatalytic oxidation kinetics of indoor air pollutants. Environ Sci Technol. 2007;
41: 2028–2035.
39.
NakaharaKYamaguchiTLimEItoK.Computational fluid dynamics modeling and parameterization of the visible light photocatalytic oxidation process of toluene for indoor building material. Sustain Cities Soc2017;
35: 298–308.
40.
Guidelines for air quality. Occupational and environmental health team.
Geneva:
World Health Organization (WHO), 2000.
41.
MurakamiSKatoSItoKZhuQ.Modeling and CFD prediction for diffusion and adsorption within room with various adsorption isotherms. Indoor Air2003;
13: 20–27.
42.
EinagaHTokuraJTeraokaYItoK.Kinetic analysis for TiO2-catalyzed heterogeneous photocatalytic oxidation processes for ethylene using computational fluid dynamics. Chem Eng J2015;
263: 325–335.
43.
ObeeTMBrownRT.TiO2 photocatalysis for indoor air applications: Effects of humidity and trace contaminant levels on the oxidation rates of formaldehyde, toluene, and 1,3-butadiene. Environ Sci Technol1995;
29: 1223–1231.
44.
OllisDF.Kinetics of liquid phase photocatalyzed reactions: an illuminating approach. J Phys Chem B2005;
109: 2439–2444.
45.
ThimijanRWHeinsRD.Photometric, radiometric, and quantum light units of measure: a review of procedures for interconversion. Hort Science1983;
18: 818–822.
46.
BrunauerSEmmettPHTellerE.Adsorption of gases in multimolecular layers. J Am Chem Soc1938;
60: 309–319.
47.
PeiJShunJZhangS.Determination of adsorption isotherm and diffusion coefficient of toluene on activated carbon at low concentrations. Build Environ2012;
48: 66–76.
48.
AtakaYKatoSMurakamiSZhuQItoKYokotaT.Study of effect of adsorptive building material on formaldehyde concentrations: development of measuring methods and modeling of adsorption phenomena. Indoor Air2004;
14: 51–64.
49.
AbeKKondohTNaganoY.A new turbulence model for predicting fluid flow and heat transfer in separating and reattaching flows – I. Flow field calculations. Int J Heat Mass Transf1994;
37: 139–151.
MangkutoRA.Validation of DIALux 4.12 and DIALux evo 4.1 against the analytical test cases of CIE 171:2006. Leukos2016;
12: 139–150.
52.
SorensenDNNielsenPV.Quality control of computational fluid dynamics in indoor environments. Indoor Air2003;
13: 2–17.
53.
ZhaiZJZhangZZhangWChenQ.Evaluation of various turbulence models in predicting air-flow and environments by CFD: part 1 – summary of prevalent turbulence models. HVAC&R Res2007;
13: 853–870.
54.
ZhangZZhaiZJZhangWChenQ.Evaluation of various turbulence models in predicting air-flow and environments by CFD: part 2 – comparison with experimental data from literature. HVAC&R Res2007;
13: 871–886.
55.
ItoKInthavongKKurabuchiTUedaTEndoTOmoriTOnoHKatoSSakaiKSuwaYMatsumotoHYoshinoHZhandWTuJ.CFD benchmark tests for indoor environmental problems: part 1 isothermal/non-isothermal flow in 2D and 3D room model. Int J Archit Eng Technol2015;
2: 01–22.
VildozoDPortelaRFerronatoCChovelonJM.Photocatalytic oxidation of 2-propanol/toluene binary mixtures at indoor air concentration levels. Appl Catal B: Environ2011;
107: 347–354.
58.
JeongJSekiguchiKLeeWSakamotoK.Photodegradation of gaseous volatile organic compounds (VOCs) using TiO2 photoirradiated by an ozone-producing UV lamp: decomposition characteristics, identification of by-products and water-soluble organic intermediates. J Photochem Photobiol A: Chem2005;
169: 279–287.
59.
TsaiandCWChangCTChiouCSShieJLChangYM.Study on the indoor volatile organic compound treatment and performance assessment with TiO2/MCM-41 and TiO2/Quartz photoreactor under ultraviolet irradiation. J Air Waste Manage2008;
58: 1266–1273.
