Optimum dimensional synthesis for the working mechanism of a hydraulic excavator to improve the digging performance

Abstract

The direction and magnitude of the digging resistance encountered by an excavator during digging process are usually uncertain. To identify the excavator’s capability to generate digging force to overcome the digging resistance in any direction, a hexahedral actuator force space is mapped to a polygon in bucket force space with the consideration of the whole machine stability constraints of an excavator. Then this polygon is called digging capability polygon. Based on the digging capability polygon, the maximum digging force, isotropy measure of the digging force, and the full exertion proportion measures of the driving capability of the working hydraulic cylinders are defined to quantify the digging performance of any configuration of the working mechanism. Further the average values of each of these indices in the customary digging workspace are used to comprehensively assess the digging performance of an excavator. A multi-objective evaluation function is constructed using the so-called ideal point method to increase all average values of the given indices simultaneously. Optimum dimensional synthesis of the working mechanism is finished by using the genetic algorithm to solve the established optimization problem. The optimization results indicate that the average values of the maximum digging force, isotropy measure of the digging force, and full exertion proportion measures of the bucket cylinder and stick cylinder in the customary digging workspace respectively increase by 1.81%, 1.51%, 9.64%, and 15.15% relative to the initial excavator, and obvious increases in the key workspace parameters of the optimized excavator are obtained. The performance indices proposed in this research can be used to assess the digging performance of an existing excavator and further guide the new excavator design and development. The optimization method provided in this research can be used to design new excavators or improve the existing excavators.

Keywords

Hydraulic excavator digging performance mechanism dimension synthesis multi-objective optimization

Get full access to this article

View all access options for this article.

References

Vähä

Skibniewski

. Dynamic model of excavator. J Aerosp Eng 1993; 6: 148–158.

Koivo

Thoma

Kocaoglan

et al.

Modelling and control of excavator dynamics during digging operation. J Aerosp Eng 1996; 9: 10–18.

Frimpong

Inyang

. Dynamic modelling of hydraulic shovel excavators for geomaterials. Int J Geomech 2008; 8: 20–29.

Towarek

. Dynamics of a single-bucket excavator on a deformable soil foundation during the digging of ground. Int J Mech Sci 2003; 45: 1053–1076.

Šalinić

Bošković

Nikolić

. Dynamic modelling of hydraulic excavator motion using Kane’s equations. Autom Constr 2014; 44: 56–62.

Chen

Qing

Pang

. Mechanism optimal design of backhoe hydraulic excavator working device based on digging paths. J Mech Sci Technol 2014; 28: 213–222.

Kim

Jung

Kim

et al.

Optimal design of the front linkage of a hydraulic excavator for multi-objective function. J Mech Sci Technol 2014; 28: 3103–3111.

ISO 6015:2006. Earth-moving machinery–hydraulic excavators and manipulator loaders–methods of determining tool forces. Geneva: ISO, 2006.

Hall

McAree

. A study of the interaction between operator style and machine capability for a hydraulic mining excavator. Proc IMechE, Part C: J Mechanical Engineering Science 2005; 219: 477–489.

10.

Yoshikawa

. Manipulability of robotic mechanisms. Int J Robot Res 1985; 4: 3–9.

11.

Lee J. A study on the manipulability measures for robot manipulators. In: Proceedings of 1997 IEEE/RSJ international conference on intelligent robot and systems, Grenoble, France, 7–11 September 1997, pp.1458–1465.

12.

Finotello R, Grasso T, Rossi G, et al. Computation of kinetostatic performances of robot manipulators with polytopes. In: Proceedings of the 1998 IEEE international conference on robotics & automation, Leuven, Belgium, May 1998, pp.3241–3246.

13.

Chiacchio P, Bouffard-Vercelli Y and Pierrotolt F. Evaluation of force capabilities for redundant manipulators. In: Proceedings of the 1996 IEEE international conference on robotics and automation, Minneapolis, MN, USA, April 1996, pp.3520–3525.

14.

Kim JG, Hong KS and Kang DH. Manipulability analysis of a parallel machine tool: optimal link parameters design. In: Proceedings of the ICMT’99, Pusan, Korea, 21–23 October 1999.

15.

Ding

Huang

Liu

et al.

Automatic structural synthesis of the whole family of planar 3-degrees of freedom closed loop mechanisms. ASME J Mech Robot 2013; 5: 041006–1–10.

16.

Deb

. Multi-objective optimization using evolutionary algorithms, New York: John Wiley & Sons, 2001.

17.

Sharaf

Rahnejat

King

. Analysis of handling characteristics of all-wheel-drive off-road vehicles. Int J Heavy Veh Syst 2008; 15: 89–106.

18.

Senatore

Sandu

. Off-road tire modeling and the multi-pass effect for vehicle dynamics simulation. J Terramech 2011; 48: 265–276.

19.

Bodin

. Development of a tracked vehicle to study the influence of vehicle parameters on tractive performance in soft terrain. J Terramech 1999; 36: 167–181.

20.

Spong

Hutchinson

Vidyasagar

. Robot modelling and control, New York: John Wiley & Sons, 1989.