In order to analyze the torsional vibration of the crankshaft system, a three-dimensional model of the crankshaft system is established, consisted of the piston, connected rod, crank shaft, flywheel and silicone oil damper. Use by multi-body dynamics simulation software ADAMS, created the multi-body dynamics model of the multiple degrees of freedom consisting of rigid hybrid engine system, to do the torsional vibration response simulation, analysis of the torsional vibration on the crankshaft. Through the torsional vibration test of the diesel engine crankshaft system, the accuracy of the simulation calculation results have been verified. This simulation result has higher accuracy, and this calculation method has certain engineering application value.
WuX.The diesel engine shaft torsional vibration damper design calculations and test equipment research. MA Thesis, Wuhan University of Technology, China, 2009.
ZeischkaJMayerLSSchersenM, et al. Multibody dynamics with deformable bodies applied to the flexible rotating crankshaft and the engine block. In: ASME fall technical conference, Lafayette, IN, USA, 2–5 October 1994, pp. 123–127.
6.
BoysalARahnejatH.Torsional vibration analysis of a multi-body single cylinder internal combustion engine model. Appl Math Model J1997;
21: 481–493.
7.
DuHI.Simulation of flexible rotating crankshaft with flexible engine block and hydrodynamic bearings for a V6 engine. SAE Trans J1999;
10: 1852–1860.
8.
LeiY.Analysis and control of torsional vibration of crankshaft of automotive diesel engine. MA Thesis, Chongqing University, China, 2005.
9.
HanT-QYaoS-HWuS-J.Analysis of torsional vibration and vibration abatement of vehicle diesel engine shafting based on excite-designer. J Hubei Inst Technol2005;
19: 5–8.
10.
SongW. Torsional Vibration Analysis of Crankshaft of Gasoline Engine and Performance Comparison of Different Shock Absorbers. Diesel Engine and Power Plant, J 2010; 1: 21–24.
11.
KushwahaMGuptaSKellyP, et al.
Elasto-multi-body dynamics of a multi-cylinder internal combustion engine. Proc IMechE, Part K: J Multi-body Dynamics2002;
216: 281–293.
12.
PereraMSTheodossiadesSRahnejatH.Elasto-multi-body dynamics of internal combustion engines with tribological conjunctions. Proc IMechE, Part K: J Multi-body Dynamics2010;
224: 261–277.
13.
Hong-GuangD.Research on flexible body simulation theory based on ADAMS Platform. MA Thesis, Hefei University of Technology, China, 2008.
14.
MaW-Y.Research on vibration mechanism of high-speed diesel engine shafting based on virtual prototyping technology. PhD Thesis, Tianjin University, China, 2009.
15.
ChengX.Research on multi-body dynamics of crankshaft system based on virtual technology. MA Thesis, Tianjin University, China, 2005.
16.
WangMPingZ.Research on the engine silicone-oil damper matching calculation method based on the heat balance Research Journal of Applied Sciences. Engineering and Technology J2012;
4(16): 2773–2777.
17.
WangM. The diesel silicone shock absorber damping mechanism and matching simulation technology research. combustion engine J 2012; 5: 94–97.
18.
HengJXingJ.Adams/Flex and AutoFlex training tutors.
Beijing:
Science and Technology Press, 2006.
19.
HengJ.Computational dynamics of multi-body systems.
Beijing:
Higher Education Press, 1999.
20.
ZhengKHuRChenL, et al. Advanced application examples of ADAMS mechanical design.
Beijing:
China Machine Press, 2006.
21.
HongGD.Research on flexible body simulation theory based on ADAMS platform. MA Thesis, Hefei University of Technology, China, 2008.
