Proposing a novel nonlinear integrated control technique for an electric power steering system to improve automotive dynamic stability

This article proposes a new control solution for an electric power steering (EPS) system to ensure the stability of car's dynamic behaviours. This work provides two new contributions which differ from previously existing publications. Firstly, a novel control method for the steering system is designed in this article based on a combination of proportional-integral-derivative (PID) and backstepping control techniques. The input to the backstepping algorithm is the output of the PID controller, whose parameters are tuned by a complex fuzzy algorithm with two inputs. Secondly, values of road reaction torque and other dynamic effects are calculated using a complex automotive dynamics model based on a nonlinear motion model and a spatial oscillation model. The stability of the control system is evaluated through the Lyapunov control function and the error between the output signals, while the dynamic stability is evaluated through the changes in car's dynamic behaviours. According to the simulation results, output values always closely follow ideal values with negligible errors if and only when the steering system is controlled by the proposed algorithm. In some conditions, the steering motor angle error achieved by the proposed controller does not exceed 0.022 rad, much lower than the fault scenario. In addition, the vehicle's roll angle and motion trajectory always follow the desired value with minimal errors. In conclusion, if the EPS system is controlled by the new control technique shown in this article, car dynamic stability will be guaranteed under all investigated conditions.