The elastoplastic behavior of aluminum (Al) nanocomposites reinforced with aligned carbon nanotubes (CNTs) is characterized using a unit cell micromechanical model. The interphase zone caused by the chemical reaction between CNT and Al matrix is included in the analysis. To attain the elastoplastic stress–strain curve of the nanocomposites, the successive approximation method together with the von Mises yield criterion is employed. The effects of several important factors including the volume fraction and diameter of CNT, material properties, and size of interphase on the elastoplastic stress–strain curve of the nanocomposites during uniaxial tension are studied. The results indicate that the interphase characteristics significantly affect the elastoplastic behavior of the CNT-reinforced Al nanocomposites. It is also found that the yield stress of the nanocomposites rises with increasing CNT volume fraction or decreasing CNT diameter. Besides, the elastoplastic stress–strain curve of the CNT-reinforced Al nanocomposites is presented for multiaxial tension. The initial yield envelopes of the nanocomposites under longitudinal–transverse biaxial tension are provided too. Comparison between the elastic results of the present model with those of other available micromechanical analyses shows a very good agreement.
JibranMZuberiSEsatV. Evaluating the effects of size and chirality on the mechanical properties of singlewalled carbon nanotubes through equivalent-continuum modelling. Proc IMechE, Part L: J Materials: Design and Applications2015.
2.
YengejehSIKazemiSAÖchsnerA. Advances in mechanical analysis of structurally and atomically modified carbon nanotubes and degenerated nanostructures: A review. Compos Part B: Eng2016; 86: 95–107.
3.
ZhangLWCuiWCLiewKM. Vibration analysis of functionally graded carbon nanotube reinforced composite thick plates with elastically restrained edges. Int J Mech Sci2015; 103: 9–21.
FengCJiangL. Micromechanics modeling of the electrical conductivity of carbon nanotube (CNT)–polymer nanocomposites. Compos Part A: Appl Sci Manuf2013; 47: 143–149.
8.
JoshiUASharmaSCHarshaSP. Effect of carbon nanotube orientation on the mechanical properties of nanocomposites. Compos Part B: Eng2012; 43: 2063–2071.
9.
PanYWengGJMeguidSAet al.Interface effects on the viscoelastic characteristics of carbon nanotube polymer matrix composites. Mech Mater2013; 58: 1–11.
AnumandlaVGibsonRF. A comprehensive closed form micromechanics model for estimating the elastic modulus of nanotube-reinforced composites. Compos Part A: Appl Sci Manuf2006; 37: 2178–2185.
12.
HsuMH. Dynamic analysis of multi-walled carbon nanotubes using the differential quadrature method. Proc IMechE, Part C: J Mech Eng Sci2010; 224: 731–744.
13.
DemczykBGWangYMCumingsJet al.Direct mechanical measurement of the tensile strength and elastic modulus of multiwalled carbon nanotubes. Mater Sci Eng A2002; 334: 173–178.
14.
YakobsonBIBrabecCJBernholcJ. Nanomechanics of carbon tubes: Instabilities beyond linear response. Phys Rev Lett1996; 76: 2511–2515.
YanaseKMoriyamaSJuJW. Effects of CNT waviness on the effective elastic responses of CNT-reinforced polymer composites. Acta Mech2013; 224: 1351–1364.
17.
MayandiKJeyarajP. Bending, buckling and free vibration characteristics of FG-CNT-reinforced polymer composite beam under non-uniform thermal load. Proc IMechE, Part L: J Materials: Design and Applications2015; 229: 13–28.
18.
MakvandiRÖchsnerA. On a numerical strategy to simulate nanotube-reinforced composite materials. Matwiss Werkstofftech2014; 45: 429–435.
19.
NguyenBNHenagerCHJr. Mode I fracture toughness prediction for multiwalled-carbon nanotube reinforced ceramics. Eng Fract Mech2015; 147: 83–99.
20.
TaheriMMazaheriMGolestani-fardFet al.High/room temperature mechanical properties of 3Y-TZP/CNTs composites. Ceram Int2014; 40: 3347–3352.
21.
ChuKWuQJiaCet al.Fabrication and effective thermal conductivity of multi-walled carbon nanotubes reinforced Cu matrix composites for heat sink applications. Compos Sci Technol2010; 70: 298–304.
22.
ChaSIKimKTArshadSNet al.Extraordinary strengthening effect of carbon nanotubes in metal–matrix nanocomposites processed by molecular-level mixing. Adv Mater2005; 17: 1377–1381.
23.
GeorgeRKashyapKTRahulRet al.Strengthening in carbon nanotube/aluminium (CNT/Al) Composites. Scripta Mater2005; 53: 1159–1163.
24.
ChenBKondohKImaiHet al.Simultaneously enhancing strength and ductility of carbon nanotube/aluminum composites by improving bonding conditions. Scripta Mater2016; 113: 158–162.
25.
TjongSC. Recent progress in the development and properties of novel metal matrix nanocomposites reinforced with carbon nanotubes and graphene nanosheets. Mater Sci Eng R2013; 74: 281–350.
26.
EsawiAMKMorsiKSayedAet al.Fabrication and properties of dispersed carbon nanotube–aluminum composites. Mater Sci Eng A2009; 508: 167–173.
27.
SharmaMSharmaV. Chemical, mechanical, and thermal expansion properties of a carbon nanotube-reinforced aluminum nanocomposite. Int J Miner Metall Mater2016; 23: 222–233.
EsawiAMKMorsiKSayedAet al.Effect of carbon nanotube (CNT) content on the mechanical properties of CNT-reinforced aluminium composites. Compos Sci Technol2010; 70: 2237–2241.
30.
ZhuXZhaoYGWuMet al.Fabrication of 2014 aluminum matrix composites reinforced with untreated and carboxyl-functionalized carbon nanotubes. J Alloy Compd2016; 674: 145–152.
HeCNZhaoNQShiCSet al.Mechanical properties and microstructures of carbon nanotube-reinforced Al matrix composite fabricated by in situ chemical vapor deposition. J Alloy Compd2009; 487: 258–262.
33.
BakshiSRAgarwalA. An analysis of the factors affecting strengthening in carbon nanotube reinforced aluminum composites. Carbon2011; 49: 533–544.
34.
TangYCongHZhongRet al.Thermal expansion of a composite of single-walled carbon nanotubes and nanocrystalline aluminum. Carbon2004; 42: 3260–3262.
35.
LiuZYXiaoBLWangWGet al.Effect of carbon nanotube orientation on mechanical properties and thermal expansion coefficient of carbon nanotube-reinforced aluminum matrix composites. Acta Metall Sin2014; 27: 901–908.
36.
KashyapKTKoppadPGPuneethKBet al.Elastic modulus of multiwalled carbon nanotubes reinforced aluminium matrix nanocomposite – A theoretical approach. Comput Mater Sci2011; 50: 2493–2495.
37.
NouriNZiaei-RadSAdibiSet al.Fabrication and mechanical property prediction of carbon nanotube reinforced aluminum nanocomposites. Mater Des2012; 34: 1–14.
38.
AlfonsoINavarroOVargasJet al.FEA evaluation of the Al4C3 formation effect on the Young’s modulus of carbon nanotube reinforced aluminum matrix composites. Compos Struct2015; 127: 420–425.
39.
ChoiBKYoonGHLeeS. Molecular dynamics studies of CNT-reinforced aluminum composites under uniaxial tensile loading. Compos Part B: Eng2016; 91: 119–125.
40.
CiLRyuZJin-PhillippNYet al.Investigation of the interfacial reaction between multi-walled carbon nanotubes and aluminum. Acta Mater2006; 54: 5367–5375.
41.
BakshiSRKeshriAKSinghVet al.Interface in carbon nanotube reinforced aluminum silicon composites: Thermodynamic analysis and experimental verification. J Alloy Compd2009; 481: 207–213.
42.
AghdamMMDezhsetanA. Micromechanics based analysis of randomly distributed fiber reinforced composites using simplified unit cell model. Compos Struct2005; 71: 327–332.
43.
FalahatgarSRSalehiMAghdamMM. Nonlinear viscoelastic response of unidirectional fiber-reinforced composites in off-axis loading. J Reinf Plast Compos2009; 28: 1793–1811.
44.
SayyidmousaviABougheraraHFalahatgarSAet al.Thermomechanical viscoelastic response of a unidirectional graphite/polyimide composite at elevated temperatures using a micromechanical approach. J Compos Mater2015; 49: 519–534.
45.
Hassanzadeh-AghdamMKMahmoodiMJAnsariR. Interphase effects on the thermo-mechanical properties of three-phase composites. Proc IMechE, Part C: J Mechanical Engineering Science2015. DOI: 10.1177/0954406215612830.
46.
AnsariRHassanzadeh-AghdamMKMahmoodiMJ. Three-dimensional micromechanical analysis of the CNT waviness influence on the mechanical properties of polymer nanocomposites. Acta Mech2016; 227: 3475–3495.
47.
AnsariRHassanzadeh-AghdamMKDarvizehA. Coefficients of thermal expansion of carbon nanotube-reinforced polyimide nanocomposites: A micromechanical analysis. Proc IMechE, Part L: J Materials: Design and Applications2016. DOI: 10.1177/1464420716666106.
48.
AnsariRHassanzadeh-AghdamMK. Micromechanical characterizing elastic, thermoelastic and viscoelastic properties of functionally graded carbon nanotube reinforced polymer nanocomposites. Meccanica2016. DOI: 10.1007/s11012-016-0512-1.
49.
AnsariRHassanzadeh-AghdamMK. Micromechanical investigation of creep-recovery behavior of carbon nanotube-reinforced polymer nanocomposites. Int J Mech Sci2016; 115–116: 45–55.
50.
Hassanzadeh-AghdamMKAnsariR. A micromechanical model for effective thermo-elastic properties of nanocomposites with graded properties of interphase. J Sci Technol Trans Mech Eng2016. DOI: 10.1007/s40997-016-0045-1.
51.
ChenYZhangZHuangRet al.Effect of residual interface stress on thermo-elastic properties of unidirectional fiber-reinforced nanocomposites. Int J Mech Sci2016; 113: 133–147.
52.
KundalwalSIRayMC. Effect of carbon nanotube waviness on the effective thermoelastic properties of a novel continuous fuzzy fiber reinforced composite. Compos Part B: Eng2014; 57: 199–209.
53.
SnipesJSRobinsonCTBaxterSC. Effects of scale and interface on the three-dimensional micromechanics of polymer nanocomposites. J Compos Mater2011; 45: 2537–2546.
KundalwalSIRayMC. Effective properties of a novel continuous fuzzy-fiber reinforced composite using the method of cells and the finite element method. Eur J Mech A/Solids2012; 36: 191–203.
ChenBLiSImaiHet al.Load transfer strengthening in carbon nanotubes reinforced metal matrix composites via in-situ tensile tests. Compos Sci Technol2015; 113: 1–8.
58.
ShirasuKYamamotoGTamakiIet al.Negative axial thermal expansion coefficient of carbon nanotubes: Experimental determination based on measurements of coefficient of thermal expansion for aligned carbon nanotube reinforced epoxy composites. Carbon2015; 95: 904–909.
59.
MendelsonA. Plasticity: Theory and application, Malabar, FL: Krieger, 1986.
60.
LiuYJChenXL. Evaluations of the effective material properties of carbon nanotube-based composites using a nanoscale representative volume element. Mech Mater2003; 35: 69–81.
61.
PinderaMJBednarcykBA. An efficient implementation of the generalized method of cells for unidirectional, multi-phased composites with complex microstructures. Compos Part B: Eng1999; 30: 87–105.
