Tandem laser-gas metal arc welding joining of 20 mm thick super duplex stainless steel: An experimental and numerical study

Abstract

The present work covers the topic of strains and stresses prediction in case of welded steel structures. Steel sheets of 20 mm thickness made in UR™2507Cu are welded using a laser and gas metal arc welding processes combination. The focused laser beam leads the arc in a Y-shape chamfer geometry. Both sources are 20 mm apart from each other in order to avoid any synergic effect with each other. In order to predict residual strain, a 3D unsteady numerical simulation has been developed in COMSOL finite element software. A volume heat source has been identified based on the temperature measurements made by 10 K-type thermocouples, implanted inside the workpiece. The 50 mm deep holes are drilled in the workpiece using dye-sinking Electrical Discharge Machining (EDM) machine. Before the implantation in the hole, each thermocouple is surrounded by Inconel sheathing. Hot junctions of the thermocouples are positioned in a way to feel two advancing molten pools. The equivalent heat source is composed of three sources. First one is a Goldak source that represents the molten pool induced by gas metal arc welding. The second one is a cylinder with an elliptic cross-section that represents the focused laser beam penetrating into the workpiece. The third one is a surface Gaussian source that represents energy radiated by arc and blocked by workpiece surface. Concerning mechanical simulation, an elasto-plastic behavior with isotropic hardening is implemented. A weak coupling is established between equations governing heat transfer and mechanics thanks to the temperature dependent coefficient of linear expansion. This numerical simulation made with some simplifying assumptions predicts an angular distortion and a longitudinal shrinkage of the welded structure. The numerical results are consistent with the displacements measured by digital image correlation method.

Keywords

Finite element method laser-gas metal arc welding materials processing simulation thermomechanics welding

Get full access to this article

View all access options for this article.

References

Steen

Eboo

. Arc augmented laser welding. Met Constr 1979; 11: 332–335.

Steen

. Arc augmented laser processing of materials. J Appl Phys 1980; 51: 5636–5641.

Tusek

Suban

. Hybrid welding with arc and laser beam. Sci Technol Weld Joining 1999; 4: 308–311.

Dilthey

Wieschemann

. Prospects by combining and coupling laser beam and arc welding processes. Weld World 2000; 44: 37–46.

Bagger

Olsen

. Review of laser hybrid welding. J Laser Appl 2005; 17: 2–14.

Mahrle

Beyer

. Hybrid laser beam welding – classification, characteristics, and applications. J Laser Appl 2006; 18: 169–180.

Olsen

. Hybrid laser-arc welding, New York: Woodhead Publishing, 2009.

Ribic

Palmer

Debroy

. Problems and issues in laser-arc hybrid welding. Int Mater Rev 2009; 54: 223–244.

Kah P. Usability of laser-arc hybrid welding processes in industrial applications. PhD Thesis, Lappeenranta University of Technology, Finland, 2011.

10.

Kovacevic

. Welding processes, New York: InTech, 2012.

11.

Stute

King

Hermsdorf

. Interaction between electrical arc and Nd:YAG laser radiation. CIRP Ann 2007; 56: 197–200.

12.

Mahrle

Schnick

Rose

, et al. Process characteristics of fibre-laser assisted plasma arc assisted welding. J Phys D Appl Phys 2011; 44: 16–16.

13.

Reutzel EW, Kelly SM, Martukanitz RP, et al. Laser-GMA hybrid welding: process monitoring and thermal modeling. In: Trends in welding research, proceedings of the 7th international conference (eds SA David, et al.), 2006, pp.143–148. Pine Mountain, GA: ASM International.

14.

Eriksson

Powell

Kaplan

. Guidelines in the choice of parameters for hybrid laser arc welding with fiber lasers. Phys Procedia 2013; 41: 119–127.

15.

Zhang

Hua

Liao

, et al. Study of metal transfer in CO₂ laser + GMAW-P HW using Ar-He mixtures. Opt Laser Technol 2014; 56: 158–166.

16.

Liu

Zhang

, et al. Analysis of droplet transfer mode and forming process of weld bead in CO₂ laser-MAG hybrid welding process. Opt Laser Technol 2012; 44: 1019–1025.

17.

Moradi

Ghoreishi

Frostenvarg

, et al. An investigation on stability if laser arc welding. Opt Lasers Eng 2013; 51: 481–487.

18.

Debroy

David

. Physical processes in fusion welding. Rev Mod Phys 1995; 67: 85–112.

19.

Höche

Müller

Rapin

, et al. Marangoni convection during free electron laser nitriding of titanium. Metall Mater Trans 2009; 40: 497–507.

20.

Piekarska

Kubiak

. Modeling of thermal phenomena in single laser beam and laser-arc hybrid welding processes using projection method. Appl Math Modell 2013; 37: 2051–2062.

21.

Eagar TW. Physics of arc welding. In: AIP/AISI 1981 Conference, Physics in the Steel Industry, Bethlehem, Pennsylvania, 5-7 October 1981, pp.272–285. New York.

22.

Block-Bolten

Eagar

. Metal vaporization from weld pool. Metall Trans 1984; 15B: 461–469.

23.

Turchin

Valdaytseva

Tzibulsky

, et al. Simulation and technology of hybrid welding of thick steel parts with high power fiber laser. Phys Procedia 2011; 12: 646–655.

24.

Harris ID. High-speed GMAW and laser GMAW hybrid welding of steel sheet. PhD Thesis, Cranfield University, UK, 2009.

25.

Roepke

Liu

Kelly

, et al. Hybrid laser arc welding process evaluation on D36 and E36 steel. Weld Res 2010; 89: 140–s–150-s.

26.

Cao

Wanjara

Huang

, et al. Hybrid ﬁber laser – arc welding of thick section high strength low alloy steel. Mater Des 2011; 32: 3399–3413.

27.

Naito

Masami

Seiji

. Penetration characteristics and plume behavior in laser-arc hybrid welding. Trans Weld J 2003; 32: 71–74.

28.

den Ouden

. Laser induced stabilisation of the welding of the welding arc. Sci Technol Weld Joining 2005; 10: 76–81.

29.

Shinn

Farson

Denney

. Laser stabilisation of arc cathode spots in titanium welding. Sci Technol Weld Joining 2005; 10: 475–481.

30.

Campana

Fortunato

Ascari

, et al. The influence of arc transfer mode in hybrid laser-mig welding. J Mater Process Technol 2007; 191: 111–113.

31.

Qin

Lei

Lin

. Effects of Nd:YAG laser plus pulsed MAG arc hybrid welding parameters on its weld shape. Sci Technol Weld Joining 2007; 12: 79–86.

32.

Ramirez

Lippold

Brandi

. The relationship between chromium nitride and secondary austenite precipitation in duplex stainless steels. Metall Mater Trans A 2003; 34: 1575–1597.

33.

Goldak

Chkravarti

Bibby

. A new finite element model for welding heat sources. Metall Trans B 1984; 15B: 299–305.

34.

Bendaoud

Matteï

Cicala

, et al. The numerical simulation of heat transfer during a hybrid laser–MIG welding using equivalent heat source approach. Opt Laser Technol 2014; 56: 334–342.