Alloy X is prone to liquation and solidification cracks in the weldments, because of the development of topologically close-packed precipitates such as σ, P, M6C, and M23C6 carbides during arc welding methods. The present work examines the possibility of alleviating the segregation of Cr and Mo content to eliminate the development of topologically close-packed phases using a conventional arc welding technique. The welding of Alloy X has been achieved with ERNiCrMo-2 filler material by gas tungsten arc welding and pulsed current gas tungsten arc welding technique. The optical microscope shows the refined microstructure in pulsed current gas tungsten arc with respect to gas tungsten arc welding. The Mo-rich segregation was identified in gas tungsten arc weldment, and the same was absent in pulsed current gas tungsten arc. These segregations of Mo-rich content encourage the development of M3C and M6C secondary precipitates in gas tungsten arc welding. Pulsed current gas tungsten arc welding shows the existence of NiCrCoMo precipitate. The present work confirmed the absence of P, σ, and M23C6 in both the weldments of Alloy X. The ultimate tensile strength, microhardness, and impact strength of pulsed current gas tungsten arc welding are increased by 3.39, 9.17, and 21.62%, respectively, with gas tungsten arc welding. The observed Mo-rich M3C and M6C secondary phases in the gas tungsten arc welding affect the tensile strength of the weldments.
SathishkumarMManikandanM. Hot corrosion behaviour of continuous and pulsed current gas tungsten arc welded Hastelloy X in different molten salts environment. Mater Res Express2019; 6: 126553–126553.
3.
TomusDRometschPAHeilmaierM, et al.Effect of minor alloying elements on crack-formation characteristics of Hastelloy-X manufactured by selective laser melting. Addit Manuf2017; 16: 65–72.
4.
HongHUKimISChoiBG, et al.Effects of temperature and strain range on fatigue cracking behavior in Hastelloy X. Mater Lett2008; 62: 4351–4353.
5.
Sathishkumar M, Naiju CD and Manikandan M. Investigation of metallurgical and mechanical properties of Hastelloy X by key-hole plasma arc welding process. SAE Technical Paper 2019-28-0152, 2019, pp.1–5.
6.
HanQMertensRMontero-SistiagaML, et al.Laser powder bed fusion of Hastelloy X: effects of hot isostatic pressing and the hot cracking mechanism. Mater Sci Eng A2018; 732: 228–239.
7.
SihotangRSung-SangPEung-RyulB. Effects of heat input on microstructure of tungsten inert gas welding used Hastelloy X. Mater Res Innov2014; 18: S2–1074–S2-1080.
8.
Baek ER, Park SS, Sihotang RS, et al. Heat treatment of the degraded Hastelloy-X for high cycle fatigue properties. In: Proceedings of the 9th international conference on fracture and the strength of solids, Jeju Island, Korea, 2013, p.91.
9.
Reza AbediMSabetHRazaviH. The effect of repair welding number on microstructure of Hastelloy X fabricated via TIG process. Int J Mater Sci Appl2016; 5: 43–48.
10.
OjoOAChaturvediMC. Liquation microfissuring in the weld heat-affected zone of an overaged precipitation-hardened nickel-base superalloy. Metall Mater Trans A Phys Metall Mater Sci2007; 38: 356–369.
11.
PakniatMGhainiFMTorkamanyMJ. Hot cracking in laser welding of Hastelloy X with pulsed Nd:YAG and continuous fiber lasers. Mater Des2016; 106: 177–183.
12.
ArulmuruganBManikandanM. Development of welding technology for improving the metallurgical and mechanical properties of 21st century nickel based superalloy 686. Mater Sci Eng A2017; 691: 126–140.
13.
SrikanthAManikandanM. Development of welding technique to avoid the sensitization in the alloy 600 by conventional gas tungsten arc welding method. J Manuf Process2017; 30: 452–466.
14.
SathishkumarMManikandanM. Preclusion of carbide precipitates in the Hastelloy X weldment using the current pulsing technique. J Manuf Process2019; 45: 9–21.
15.
NakoniecznaNAdamiecJ. The tendency to hot cracking of the welded joints of nickel superalloy Inconel 617. Weld Technol Rev2017; 89: 5–5.
16.
Janaki RamGDVenugopal ReddyAPrasad RaoK, et al.Control of laves phase in Inconel 718 GTA welds with current pulsing. Sci Technol Weld Join2004; 9: 390–398.
17.
SubramaniPManikandanM. Development of welding technique to suppress the microsegregation in the aerospace grade alloy 80A by conventional current pulsing technique. J Manuf Process2018; 34: 579–592.
18.
HuangJKYangMHChenJS, et al.The oscillation of stationary weld pool surface in the GTA welding. J Mater Process Technol2018; 256: 57–68.
19.
GraneixJBeguinJDAlexisJ, et al.Weldability of superalloys Hastelloy X by Yb: YAG laser. Adv Mater Res2015; 1099: 61–70.
20.
MukherjeeMPalTK. Evaluation of microstructural and mechanical properties of Fe-16Cr-1Ni-9Mn-0.12N austenitic stainless steel welded joints. Mater Charact2017; 131: 406–424.
21.
JulaMDehmolaeiRAlavi ZareeSR. The comparative evaluation of AISI 316/A387-Gr.91 steels dissimilar weld metal produced by CCGTAW and PCGTAW processes. J Manuf Process2018; 36: 272–280.
22.
PandeyCGiriAMahapatraMM. On the prediction of effect of direction of welding on bead geometry and residual deformation of double-sided fillet welds. Int J Steel Struct2016; 16: 333–345.
23.
ASTM E8/E-8M-13a. Standard test methods for tension testing of metallic materials. In: ASTM International, United States, 2012, pp.133–140.
24.
ASTM E 23-04. Standard test methods for notched bar impact testing of metallic materials. In: ASTM International, United States, 2013, pp.1–25.
25.
EisazadehHHainesDJTorabizadehM. Effects of gravity on mechanical properties of GTA welded joints. J Mater Process Technol2014; 214: 1136–1142.
MukherjeeMSahaSPalTK, et al.Influence of modes of metal transfer on grain structure and direction of grain growth in low nickel austenitic stainless steel weld metals. Mater Charact2015; 102: 9–18.
28.
YeXHuaXWangM, et al.Controlling hot cracking in Ni-based Inconel-718 superalloy cast sheets during tungsten inert gas welding. J Mater Process Technol2015; 222: 381–390.
29.
LiLYangMQiB, et al.Study of high frequency pulsed arc on molten pool thermal properties of Ti-6Al-4V. J Manuf Process2019; 38: 308–312.
30.
Mokhtabad AmreiMMonajatiHThibaultD, et al.Microstructure characterization and hardness distribution of 13Cr4Ni multipass weld metal. Mater Charact2016; 111: 128–136.
31.
JinoopANPaulCPBindraKS. Laser assisted direct energy deposition of Hastelloy-X. Opt Laser Technol2019; 109: 14–19.
32.
George Vander Voort F. Metallography and microstructures. In: ASM handbook. Cleveland, OH: ASM International, 2004, p.816–819.
33.
ManikandanSGKSivakumarDPrasad RaoK, et al.Effect of weld cooling rate on Laves phase formation in Inconel 718 fusion zone. J Mater Process Technol2014; 214: 358–364.
34.
FarahaniEShamanianMAshrafizadehF. A comparative study on direct and pulsed current gas tungsten arc welding of alloy 617. AMAE Int J Manuf Mater Sci2012; 2: 1–6.
35.
WangWLiCJiangL, et al.Evolution of carbide precipitates in Hastelloy N joints during welding and post weld heat treatment. Mater Charact2018; 135: 311–316.
36.
SzkodoMGajowiecG. Studies of the mechanism of metal dusting of 10CrMo9-10 steel after 10 years of operation in the semi-regenerative catalytic reformer. Corros Sci2016; 102: 279–290.
37.
ZhouSChaiDYuJ, et al.Microstructure characteristic and mechanical property of pulsed laser lap-welded nickel-based superalloy and stainless steel. J Manuf Process2017; 25: 220–226.
38.
RakoczyLGrudzienMTuzL, et al.Microstructure and properties of a repair weld in a nickel based superalloy gas turbine component. Adv Mater Res2017; 17: 55–63.
39.
SihotangRChoiSParkS, et al.Fatigue life of the repair TIG Welded Hastelloy X superalloy. J Weld Join2015; 33: 26–30.
40.
PeasuraPPoopatB. Investigation into the influence of post-weld heat treatment on the microstructure and hardness of Inconel X-750. Adv Mech Eng2015; 7: 1–11.
41.
PandeyCMahapatraMM. Effect of groove design and post-weld heat treatment on microstructure and mechanical properties of P91 steel weld. J Mater Eng Perform2016; 25: 2761–2775.
42.
PandeyCGiriAMahapatraMM, et al.Characterization of microstructure of HAZs in as-welded and service condition of P91 pipe weldments. Met Mater Int2017; 23: 148–162.
43.
JunaidMBaigMNShamirM, et al.A comparative study of pulsed laser and pulsed TIG welding of Ti-5Al-2.5Sn titanium alloy sheet. J Mater Process Technol2017; 242: 24–38.
44.
John DuPontNJohn LippoldCSamuel KiserD. Welding metallurgy and weldability of nickel-base alloys, 1st ed. Hoboken, NJ: John Wiley & Sons, Inc., 2009.
45.
FengKLiuPLiH, et al.Microstructure and phase transformation on the surface of Inconel 718 alloys fabricated by SLM under 1050 ℃ solid solution + double ageing. Vacuum2017; 145: 112–115.
46.
ChaurasiaPKPandeyCGiriA, et al.A comparative study of residual stress and mechanical properties for fsw and tig weld on structural steel. Arch Metall Mater2018; 63: 1019–1029.
47.
PandeyCMahapatraMMKumarP, et al.Softening mechanism of P91 steel weldments using heat treatments. Arch Civ Mech Eng2019; 19: 297–310.
48.
PandeyCSainiNMahapatraMM, et al.Study of the fracture surface morphology of impact and tensile tested cast and forged (C&F) Grade 91 steel at room temperature for different heat treatment regimes. Eng Fail Anal2017; 71: 131–147.
49.
PandeyCMahapatraMMKumarP, et al.Study on effect of double austenitization treatment on fracture morphology tensile tested nuclear grade P92 steel. Eng Fail Anal2019; 96: 158–167.
50.
BalasubramanianMJayabalanVBalasubramanianV. Effect of microstructure on impact toughness of pulsed current GTA welded α-β titanium alloy. Mater Lett2008; 62: 1102–1106.
