In this research, percentages of nickel as austenizer and chromium as ferritizer, in the molten metal pool of SS304L weldments are varied to analyze the effect on the produced delta ferrites morphology and volume. The resulting localized precipitation of delta ferrite and its effect on the fatigue crack propagation rate of the material are examined in this work. The estimation of localized delta ferrite number for a particular weld zone is assessed through the development of a MATLAB code for image processing. It is observed that a reduction in the percentage of nickel in filler alloy yields randomly scattered granular ferrites in the fusion zone and equiaxed grain growing in the heat-affected zone with the development of blocky ferrites on the grain boundaries, whereas increased percentage of chromium in the filler causes the precipitation of dendritic clusters and vermicular ferrites in fusion zone and heat-affected zone of weldments, respectively. The effect of ferrite numbers and their morphology on the crack opening displacements and the corresponding fatigue crack propagation rate in different weld zones are analyzed. It is observed that the ferrite number ranging between 15 and 19 provides optimum fatigue strength for SS 304L. Paris curves are plotted from the test data, which shows that the weldment attained with filler alloy having Cr 26.60% and Ni 10.92% depicts the highest fatigue life compared to other studied weldments.
BudduRK, et al.
Studies on mechanical properties, microstructure and fracture morphology details of laser beam welded thick SS304L plates for fusion reactor applications. Fusion Eng Des2015;
95: 34–43.
2.
QayyumF, et al.
Experimental investigations and multiscale modeling to study the effect of sulfur content on formability of 16MnCr5 alloysteel. Steel Res Int2019;
90: 1800369.
3.
MukhtarF, et al.
Effect of chrome plating and varying hardness on the fretting fatigue life of AISI D2 components. Wear2019;
418: 215–225.
4.
AnjumZ, et al.
Fretting fatigue crack initiation and propagation in Ti6Al4V sheets under tribocorrosive conditions of artificial seawater and physiological solutions. Proc IMechE, Part L: J Materials: Design and Applications2020. DOI: 1464420720946431.
5.
IjazM, et al.
Effect of natural aging and fatigue crack propagation rate on welded and non-welded aluminum alloy (AA2219-T87). Adv Sci Technol Res J2019;
13: 129–143.
6.
UllahMWuCSShahM.In situ delta ferrite estimation and their effects on FCPR at different orientations of multipass shielded metal arc welded SS304L. J Manuf Process2016;
21: 107–123.
7.
UllahMWuCSQayyumF.Prediction of crack tip plasticity induced due to variation in solidification rate of weld pool and its effect on fatigue crack propagation rate (FCPR). J Mech Sci Technol2018;
32: 3625–3635.
8.
UllahM, et al.
Numerical simulation and experimental verification of CMOD in CT specimens of TIG welded AA2219-T87. Arab J Sci Eng2015;
40: 935–944.
9.
BalasubramanianT, et al.
Influence of welding processes on microstructure, tensile and impact properties of Ti-6Al-4V alloy joints.Trans Nonferrous Metals Soc China2011;
21: 1253–1262.
10.
KaraköseEKeskinM.Effect of solidification rate on the microstructure and microhardness of a melt-spun Al–8Si–1Sb alloy. J Alloys Compnd2009;
479: 230–236.
11.
ZhangL, et al.
Effect of cooling rate on solidified microstructure and mechanical properties of aluminium-A356 alloy. J Mater Process Technol2008;
207: 107–111.
12.
SenI, et al.
Microstructural effects on the mechanical behavior of B-modified Ti–6Al–4V alloys. Acta Mater2007;
55: 4983–4993.
McClintock FA and Irwin G. Plasticity Aspects of Fracture Mechanics. In: STP381-EB Fracture Toughness Testing and its Applications, 18 November 1965, pp. 84–113. West Conshohocken, PA: ASTM International, https://doi.org/10.1520/STP26586S
15.
ShihC.Relationships between the J-integral and the crack opening displacement for stationary and extending cracks. J Mech Phys Solids1981;
29: 305–326.
16.
HutchinsonJParisP. Stability analysis of J-controlled crack growth. In: STP514-EB Elastic-Plastic Fracture (eds. J Landes, J Begley, and G Clarke), 1979, pp. 37–64. West Conshohocken, PA: ASTM International, https://doi.org/10.1520/STP35826S
17.
BegleyJLandesJ.The J integral as a fracture criterion. In: STP514-EB Fracture toughness: part II (ed. H Corten), 1972, pp. 1–23.
West Conshohocken, PA:
ASTM International, https://doi.org/10.1520/STP38816S
18.
Bucci R, Paris P, Landes J, and Rice J. Integral Estimation Procedures. In: STP514-EB Fracture Toughness: Part II (ed. H Corten), 1972, pp. 40–69. West Conshohocken, PA: ASTM International, https://doi.org/10.1520/STP38818S
19.
MagudeeswaranG, et al.
Dynamic fracture toughness (J Id) behavior of armor-grade Q&T steel weldments: effect of weld metal composition and microstructure.Metals Mater Int2009;
15: 1017–1026.
20.
KannanTMuruganN.Effect of flux cored arc welding process parameters on duplex stainless steel clad quality. J Mater Process Technol2006;
176: 230–239.
21.
YuriT, et al. Effects of δ-ferrite and welding structure on high-cycle fatigue properties of austenitic stainless steels weld metals. In: AIP conference proceedings, 2002. College Park, MD: AIP.
22.
HasçalikAÜnalEÖzdemirN.Fatigue behaviour of AISI 304 steel to AISI 4340 steel welded by friction welding. J Mater Sci2006;
41: 3233–3239.
23.
KuoT-YLeeH-T.Effects of filler metal composition on joining properties of alloy 690 weldments. Mater Sci Eng A2002;
338: 202–212.
24.
ShanmugamKLakshminarayananABalasubramanianV.Effect of weld metal properties on fatigue crack growth behaviour of gas tungsten arc welded AISI 409M grade ferritic stainless steel joints.Int J Press Vess Piping2009;
86: 517–524.
25.
Della RovereC, et al.
Corrosion behavior of radial friction welded supermartensitic stainless steel pipes. Mater Des2015;
65: 318–327.
26.
IlmanMCochraneREvansG.The development of acicular ferrite in reheated Ti–B–Al–N-type steel weld metals containing various levels of aluminium and nitrogen.Weld World2015;
59: 565–575.
27.
KwietniewskiC, et al.
Effect of plastic deformation on the toughness behaviour of radial friction welds in Ti–6Al–4V–0.1 Ru titanium alloy. Mater Sci Eng A2006;
417: 49–55.
28.
KumarDHSomireddyAGururajK.A review on critical aspects of 316ln austenitic stainless steel weldability. Int J Mater Sci Appl2012;
1: 1–7.
29.
KhanF, et al.
Effect of various surface preparation techniques on the delamination properties of vacuum infused Carbon fiber reinforced aluminum laminates (CARALL): experimentation and numerical simulation. J Mech Sci Technol2017;
31: 5265–5272.
30.
SadeghianMShamanianMShafyeiA.Effect of heat input on microstructure and mechanical properties of dissimilar joints between super duplex stainless steel and high strength low alloy steel. Mater Des2014;
60: 678–684.
31.
LippoldJCKiserSDDuPontJN.Welding metallurgy and weldability of nickel-base alloys.
New York:
John Wiley & Sons, 2011.
32.
HaghdadiN, et al.
Effect of ferrite-to-austenite phase transformation path on the interface crystallographic character distributions in a duplex stainless steel. Acta Mater2018;
145: 196–209.
33.
XiongX, et al.
The effect of morphology on the stability of retained austenite in a quenched and partitioned steel. Scripta Mater2013;
68: 321–324.
34.
YanJGaoMZengX.Study on microstructure and mechanical properties of 304 stainless steel joints by TIG, laser and laser-TIG hybrid welding. Optics Lasers Eng2010;
48: 512–517.
35.
FolkhardE.Metallurgical phenomena in secondary crystallization of stainless steels and weld metals. In: Welding metallurgy of stainless steels.
New York:
Springer, 1988, pp. 78–102.
36.
GillT, et al.
Transformation of delta-ferrite during the postweld heat treatment of type 316 L stainless steel weld metal. Weld J1986;
65: 122.
37.
JíšaD, et al.
Small fatigue crack growth in aluminium alloy EN-AW 6082/T6. Int J Fatigue2010;
32: 1913–1920.
38.
SuttonMA, et al.
Development and application of a crack tip opening displacement-based mixed mode fracture criterion. Int J Solids Struct2000;
37: 3591–3618.
39.
ElahiH.The investigation on structural health monitoring of aerospace structures via piezoelectric aeroelastic energy harvesting.
Microsystem Technologies, 2020.
40.
MukhtarF, et al.
Studying the effect of thermal fatigue on multiple cracks propagating in an SS316L thin flange on a shaft specimen using a multi-physics numerical simulation model. Strojniški Vestnik – J Mech Eng2019;
65: 565–573.
