In this paper, a micromechanical fatigue life prediction method for fiber-reinforced ceramic-matrix composites subjected to stochastic overloading at room temperature is developed. Fatigue damage mechanisms in the matrix, interfaces, and fibers are characterized using different damage models. Relationships between the fatigue life and related degradation rate, stochastic overloading stress, and breakage of intact fibers are established. Experimental fatigue life of different C/SiC composites subjected to different stochastic overloading is predicted. For the same stochastic overloading condition, the degradation rate of fatigue life is the highest for cross-ply C/SiC composite, and the lowest for 2.5D C/SiC composite.
NaslainR.Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview. Compos Sci Technol2004;
64: 155−170. https://doi.org/10.1016/S0266-3538(03)00230-6
2.
LiLBReynaudP andFantozziG.Cyclic-dependent damage evolution in self-healing woven SiC/[Si-B-C] ceramic-matrix composites at elevated temperatures. Materials2020;
13: 1478. https://doi.org/10.3390/ma13061478
3.
Ruggles-WrennMBChristensenDTChamberlainAL, et al.
Effect of frequency and environment on fatigue behavior of a CVI SiC/SiC ceramic matrix composite at 1200°C. Compos Sci Technol2011;
71: 190−196,https://doi.org/10.1016/j.compscitech.2010.11.008
4.
LiLB.Thermomechanical fatigue of ceramic-matrix composites.
Weinheim, Germany:
Wiley-VCH, 2019.
ZhuSJKagawaYMizunoM, et al.
In situ observation of cyclic fatigue crack propagation of SiC-fiber/SiC composite at room temperature. Mater Sci Eng A1996;
220: 100–108, https://doi.org/10.1016/S0921-5093(96)10440-8
7.
SunLSYaoLJLvGZ, et al.
Fatigue behavior of 2D plain-woven carbon/silicon carbide composites using chemical vapor infiltration (CVI) technique. J Northwestern Polytech Univ2007;
25: 478‒481.
8.
DongNChaiNLiuYS, et al.
Thermodynamic analysis on deposition of Si-B-C-N ceramic by low pressure chemical vapor deposition/infiltration form SiCH3Cl3-BCl3-NH3-H2-Ar system. J Euro Ceram Soc2016;
36: 3581‒3591. https://dx-doi-org.web.bisu.edu.cn/10.1016/j.jeurceramsoc.2016.05.030
9.
ChenLDTongXYYaoLJ, et al.
Influence of open hole on mechanical behavior of plain-woven C/SiC ceramic matrix composites. Mater Eng2009;
9: 71‒74.
10.
LiLB.Tension-tension fatigue behavior of unidirectional C/SiC ceramic-matrix composite at room and elevated temperature and 800°C in air atmosphere. Materials2015;
8: 3316‒3333. https://doi.org/10.3390/ma8063316
11.
LiLB.Damage evolution and life prediction of cross-ply C/SiC ceramic-matrix composite under cyclic fatigue loading at room temperature and 800°C in air.Materials2015;
8: 8539−8560,https://doi.org/10.3390/ma8125474
12.
ShulerSFHolmesJWWuX, et al.
Influence of loading frequency on the room-temperature fatigue of a carbon-fiber/SiC-matrix composite. J Am Ceram Soc1993;
76: 2327−2336. https://doi.org/10.1111/j.1151-2916.1993.tb07772.x
13.
YangF.Research on fatigue behavior of 2.5d woven ceramic matrix composites. Master Thesis, Nanjing University of Aeronautics and Astronautics, Nanjing, 2011.
14.
DuSMQiaoSRJiGC, et al.
Tension-tension fatigue behavior of 3D-C/SiC composite at room temperature and 1300°C. Mater Eng2002;
9: 22−25.
GowayedYOjardGSanthoshU, et al.
Modeling of crack density in ceramic matrix composites. J Compos Mater2015;
49: 2285–2294, https://doi.org/10.1177/0021998314545188
LiLB.Fatigue life prediction of carbon fiber-reinforced ceramic-matrix composites at room and elevated temperatures. Part I: Experimental analysis. Appl Compos Mater2016;
23: 101−117, https://doi.org/10.1007/s10443-015-9446-3
20.
LiLB.Fatigue life prediction of carbon fiber-reinforced ceramic-matrix composites at room and elevated temperatures. Part II: Experimental comparisons. Appl Compos Mater2015;
22: 961‒972, https://doi.org/10.1007/s10443-015-9445-4
21.
LiLB.Fatigue life prediction of fiber-reinforced ceramic-matrix composites with different fiber preforms at room and elevated temperatures. Materials2016;
9: 207,https://doi.org/10.3390/ma9030207
YangZMYanHQianG, et al.
Influence of hierarchical porosity on the mechanical properties of porous woven composites under thermomechanical loading. Int J Solids Struct2020;
200-201: 13–22,https://doi.org/10.1016/j.ijsolstr.2020.05.002
SuzukiTMahfuzHTakanashiM.A new stiffness degradation model for fatigue life prediction of GFRPs under random loading. Int J Fatigue2019;
119: 220‒228,https://doi.org/10.1016/j.ijfatigue.2018.09.021
27.
LiLB.Stress-rupture of fiber-reinforced ceramic-matrix composites with stochastic loading at intermediate temperatures. Part I: Theoretical analysis. Materials2019;
12: 3123,https://doi.org/10.3390/ma12193123
