An optical comparison of the cavitation characteristics of diesel and bio-diesel blends in a true-scale nozzle geometry

Abstract

This study undertakes an optical comparison of the cavitation phenomena present in a true-scale optical diesel injector at fuel injection pressures up to 2000 bar. The cavitating nozzle-flow characteristics of rapeseed methyl ester B20 and B100 bio-diesel blends are compared to those of standard ultra-low sulphur petroleum diesel as a means to establish any potential differences in fuel injector performance when bio-fuel blends are introduced to the fuel injection system. A difference in the propensity for cavitation to form is shown, with cavitation inception observed earlier in the 2 ms fuel injection event tested for the bio-diesel blends, with B20 cavitating more readily than B100. Once cavitation inception has occurred, the characteristics of the flow appear to be no different to those of petroleum diesel for fuel injection pressures up to 2000 bar.

Keywords

Cavitation bio-diesel optical nozzle high pressure

Get full access to this article

View all access options for this article.

References

Balat

A critical review of bio-diesel as a vehicular fuel. Energ Convers Manage 2008; 49: 2727–2741.

Murugesan

Umarani

Subramanian

Nedunchezhian

Bio-diesel as an alternative fuel for diesel engines – a review. Renew Sust Energ Rev 2009; 13: 653–662.

National Renewable Energy Laboratory (NREL). Biodiesel handling user guide 4th ed. NREL/TP-540-43672, January. National Renewable Energy Laboratory, 2009. http://www.nrel.gov/vehiclesandfuels/pdfs/43672.pdf

Canakci

Erdil

Arcaklioglu

Performance and exhaust emissions of a biodiesel engine. Appl Energ 2006; 83: 594–605.

Mancaruso

Sequino

Vaglieco

BM.

First and second generation biodiesels spray characterisation in a diesel engine. Fuel 2011; 90: 2870–2883.

Shervani-Tabar

Sheykhvazayefi

Ghorbani

Numerical study on the effect of the injection pressure on spray penetration length. Appl Math Model 2013; 37: 7778–7788.

Demirbas

Progress and recent trends in biodiesel fuels. Energ Convers Manage 2009; 50: 14–34.

Ejim

Fleck

Amirfazli

Analytical study for atomization of biodiesels and their blends in a typical injector: surface tension and viscosity effects. Fuel 2007; 86: 1534–1544.

Allen

CAW

Watts

. Comparative analysis of the atomization characteristics of fifteen biodiesel fuel types. Trans ASAE 2000; 43(2): 207–211.

10.

Lapuerta

Armas

Rodriguez-Fernandez

Effect of biodiesel fuels on diesel engine emissions. Prog Energ Combust 2008; 34: 198–223.

11.

Park

Suh

Lee

CS.

Effect of cavitating flow on the flow and fuel atomization characteristics of biodiesel and diesel fuels. Energ Fuel 2008; 22: 605–613.

12.

Reid

Hargrave

Garner

Wigley

An investigation of string cavitation in a true-scale fuel injector flow geometry at high pressure. Phys Fluids 2010; 22: 031703.

13.

Gavaises

Andriotis

Papoulias

Mitroglou

Theodorakakos

Characterization of string cavitation in large-scale diesel nozzles with tapered holes. Phys Fluids 2009; 21: 052107.

14.

Payri

Salvador

Gimeno

Venegas

Study of cavitation phenomenon using different fuels in a transparent nozzle by hydraulic characterization and visualization. Exp Therm Flu Sci 2013; 44: 235–244.