Modelling heat transfer and fluid flow in a ship engine room using CFD analysis to evaluate and improve ventilation

Abstract

Considering that about 90% of international trade is transported via sea and ship ventilation systems consume between 3.5% and 5.5% of the ship’s rated power, ship energy consumption is of particular interest and modelling and enhancing ventilation systems are vital to reducing and optimising energy consumption. Using Computational Fluid Dynamics (CFD) simulation, modelling heat transfer and airflow patterns helped us improve the ventilation system and temperature distribution, provide thermal comfort for staff and equipment, and increase energy efficiency. We discussed the radiation effect in CFD analysis; it affected wall temperatures significantly and temperature contours to some extent; it raised air temperatures by 3 K and wall temperatures by 14 K in some areas; this issue has not been considered in previous analyses. Considering seven different engine room configurations, we analysed temperature distribution, air terminal streamlines and other parameters to choose the best. We examined four energy-saving plans for the best configuration, and airflow was reduced by 13.8% and fan power by 36% based on the temperature distribution. By improving the engine room ventilation system, average engine room temperature, heat removal efficiency, combustion air temperature, and temperature distribution developed. The analysis of air terminals included assessing their streamlines, determining areas they circulated, and customising their airflow; in addition to vertical and horizontal air terminals at the top or bottom of the engine room, we also examined a separate air terminal for engine combustion air, this tool has been used very little before.

Keywords

CFD simulation heat transfer ship engine room layout reducing energy consumption air flow patterns temperature distribution heat removal performance radiation CFD analysis

Get full access to this article

View all access options for this article.

References

Schnurr

REJ

Walker

. Marine transportation and energy use. In: Reference Module in Earth Systems and Environmental Sciences. Elsevier, 2019. DOI: 10.1016/B978-0-12-409548-9.09270-8

Pérez

Orosa

Costa

ÁM.

Energetic optimization of the ventilation system in modern ships. Appl Therm Eng 2016; 108: 816–823.

Joung

T-H

Kang

S-G

Lee

J-K

, et al. The IMO initial strategy for reducing Greenhouse Gas(GHG) emissions, and its follow-up actions towards 2050. J Int Marit Saf Environ Aff Shipp 2020; 4: 1–7.

ISO B. 8861: 1998, Shipbuilding-Engine-room ventilation in diesel engined ships-Design requirements and basis of calculations.

Pérez

Orosa

Grueiro

. A three-dimensional CFD simulation study to reduce heat stress in ships. Appl Therm Eng 2016; 94: 413–421.

Orosa

Santos

Pérez

. A practical case study of the relationship between work risk prevention and fatigue at work in Spanish merchant ships. Hum Factors Ergon Manuf Serv Ind 2011; 21: 484–492.

ISO B. 18770:2005, Ships and marine technology—Machinery-space flammable oil systems—Prevention of leakage of flammable oil.

ISO B. 7243:2017, Ergonomics of the thermal environment—Assessment of heat stress using the WBGT (wet bulb globe temperature) index.

Orosa

Costa

ÁM

Pérez

. A new modelling procedure of the engine room ventilation system for work risk prevention and energy saving. Proc IMechE, Part M: J Engineering for the Maritime Environment 2017; 231: 863–870.

10.

Newton

Lewis

Carswell

, et al. Investigating the thermal profile of a marine vessel engine room through simulation with field measurements. Appl Therm Eng 2014; 73: 1360–1370.

11.

Yuan

F-D

You

S-J

. CFD simulation and optimization of the ventilation for subway side-platform. Tunnelling Undergr Space Technol 2007; 22: 474–482.

12.

Kumar

Kubota

Tominaga

, et al. CFD simulations of wind-induced ventilation in apartment buildings with vertical voids: effects of pilotis and wind fin on ventilation performance. Build Environ 2021; 194: 107666.

13.

Zhang

Weerasuriya

Tse

. CFD simulation of natural ventilation of a generic building in various incident wind directions: Comparison of turbulence modelling, evaluation methods, and ventilation mechanisms. Energy Build 2020; 229: 110516.

14.

Cao

Liu

, et al. Influencing factors in the simulation of airflow and particle transportation in aircraft cabins by CFD. Build Environ 2022; 207: 108413.

15.

Rasekh

Mahdi

. Combining CFD, ASE, and HEKF approaches to derive all of the hydrodynamic coefficients of an axisymmetric AUV. Proc IMechE, Part M: J Engineering for the Maritime Environment 2022; 236: 474–492.

16.

Haase

Davidson

Binns

, et al. Full-scale resistance prediction in finite waters: A study using computational fluid dynamics simulations, model test experiments and sea trial measurements. Proc IMechE, Part M: J Engineering for the Maritime Environment 2017; 231: 316–328.

17.

Kim

K-W

Lee

J-H

Paik

K-J

, et al. Numerical study on the interaction between the internal and surface waves by a 2D hydrofoil moving in two-layer stratified fluid. Proc IMechE, Part M: J Engineering for the Maritime Environment 2021; 235: 480–490.

18.

Kinaci

Sukas

Bal

. Prediction of wave resistance by a Reynolds-averaged Navier–Stokes equation–based computational fluid dynamics approach. Proc IMechE, Part M: J Engineering for the Maritime Environment 2016; 230: 531–548.

19.

Jamaluddin

Utama

Widodo

, et al. Experimental and numerical study of the resistance component interactions of catamarans. Proc IMechE, Part M: J Engineering for the Maritime Environment 2013; 227: 51–60.

20.

Parsons

. International standards for the assessment of the risk of thermal strain on clothed workers in hot environments. Ann Occup Hyg 1999; 43: 297–308.

21.

Jiang

Song

, et al. Numerical simulation of ventilation and analysis in ship engine room. Ship Sci Technol 2012; 34: 52–55.

22.

Tasdemir

Bayraktar

. CFD analysis of ventilation system for an engine room. In: 1st International Ship and Marine Technology Congress (SHIP-MAR 2016), Istanbul, Turkey. 2016.

23.

George

Saha

. Coupled Computation fFluid ynamics models for air flow and thermal analysis of marine engine room. J Therm Sci Eng Appl 2021; 13: 054501. DOI: 10.1115/1.4049871

24.

Rouaud

Havet

. Computation of the airflow in a pilot scale clean room using K-ε turbulence models. Int J Refrig 2002; 25: 351–361.

25.

Guide

AFU

. Ansys Fluent Theory Guide. Canonsburg, PA: ANSYS Inc, 2011.

26.

Yakhot

Orszag

. Renormalization group analysis of turbulence. I. Basic theory. J Sci Comput 1986; 1: 3–51.

27.

Rohdin

Moshfegh

. Numerical modelling of industrial indoor environments: A comparison between different turbulence models and supply systems supported by field measurements. Build Environ 2011; 46: 2365–2374.

28.

Awbi

. Ventilation of buildings. Oxfordshire: Routledge, 2002.

29.

Cook

Zitzmann

Pfrommer

. Dynamic thermal building analysis with CFD Modelling radiation. J Build Perform Simul 2008; 1: 117–131.

30.

Mills

. Basic heat and mass transfer. London: Pearson College Division, 1999.

31.

Yuen

Takara

. Development of a generalised zonal method for analysis of radiative transfer in absorbing and anisotropically scattering media. Numer Heat Transf Part B Fundam 1994; 25: 75–96.

32.

Liu

. Numerical Solutions of three-dimensional Non-Grey gas radiative transfer using the statistical narrow-band Model. J Heat Transf 1999; 121: 200–203.

33.

Menchaca-Brandan

Dominguez Espinosa

Glicksman

. The influence of radiation heat transfer on the prediction of air flows in rooms under natural ventilation. Energy Build 2017; 138: 530–538.

34.

Glicksman

Chen

. Interaction of radiation absorbed by moisture in air with other forms of heat transfer in an enclosure. In: Roomvent’98 (Stockholm, 14-17June 1998). 1998.

35.

Velusamy

Sundararajan

Seetharamu

. Interaction effects between surface radiation and turbulent natural convection in square and rectangular enclosures. J Heat Transf 2001; 123: 1062–1070.

36.

Navarro

JMA

Hinojosa

Piña-Ortiz

, et al. The effect of surface thermal radiation on heat transfer in a ventilated cavity. J Heat Transf 2021; 143: 012801. DOI: 10.1115/1.4046530

37.

Leonardi

. The green fleet project: Energy saving measures. pp. 803–810.

38.

Seddiek

. Viability of using engine room simulators for evaluation machinery performance and energy management onboard ships. Trans R Inst Nav Archit Part Int J Marit Eng 2019; 161: A283–A291.

39.

Ifa

Driss

. Numerical simulation and experimental validation of the ventilation system performance in a heated room. Air Qual Atmos Health 2021; 14: 171–179.