In this study, beamformers consisting of phased sensor or actuator arrays are used in the nondestructive evaluation of homogeneous and heterogeneous structural components. Beamforming can be used to detect, locate, and quantify damage by suitably applying weights and time or phase delays to the tapped signals from a sensor array and/or actuator array in a narrow frequency band to obtain the desired directional sensitivities and optimal array gains. Some aspects about beamforming and wave propagation are discussed as a prelude to the experimental investigation. Design considerations for the phased arrays are also examined. The advantages of using adaptive over conventional beamforming are demonstrated with Frost constraint- and pilot signal-based adaptive techniques. Data from steel and composite plates are analyzed using propagating elastic waves and phased arrays of sensors and/or actuators. Damage, which can be characterized as a local change in impedance, is diagnosed by using propagating elastic waves as they are sensitive to small changes in impedance and do not require a large number of input/output transducers. Beamforming of sensor and/or actuator arrays is carried out to characterize damage in steel and composite plates by comparing the directivity patterns associated with the damage and baseline data.
Alleyne, D.N. and Cawley, P. (1992). The interaction of Lamb waves with defects . IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 39(3), 381–397 .
2.
Auld, B.A. (1990). Acoustic Fields and Waves in Solids, 2nd edn, Vols. I and II, Melbourne, FL: Robert E. Krieger Publishing Company , Vol. I, pp. 101–110, 163–170.
3.
Azar, L. and Wooh, S.-C. (1999). Experimental characterization of ultrasonic phased arrays for the nondestructive evaluation of concrete structures . Materials Evaluation, 56(2), 134–140 .
4.
Banerjee, S. , Benerji, P. , Berning, F. and Eberle, K. (2003). Lamb wave propagation and scattering in layered composite plates . In: Proceedings of SPIE, Smart NDE for Health Monitoring of Structural and Biological Systems, 8th Annual International Symposium on NDE for Health Monitoring & Diagnostics, San Diego, California, Paper No. 5047-02.
5.
Bar-Cohen, Y. , Mal, A. and Chang, Z. (1998). Composite material defects characterization using leaky Lamb wave dispersion data . In: Proceedings of SPIE, NDE Techniques for Aging Infrastructure & Manufacturing, Conference NDE of Materials and Composites II, San Antonio, Texas, 31 Mar–2 Apr 1998, Vol. 3396, Paper No. 3396-25.
6.
Bardouillet, P. (1984). Application of electronic focusing and scanning systems to ultrasonic testing . NDT & E International, 17(2), 81–85 .
7.
Chahbaz, A. , Gauthier, J. , Brassard, M. and Hay, D.R. (1999). Ultrasonic techniques for hidden corrosion detection in aircraft wing skin . In: Third Joint DoD/FAA/NASA Conference on Aging Aircraft, Albuquerque, New Mexico, September 20–23, 1999.
8.
Chahbaz, A. , Mustafa, V. and Hay, D.R. (1996). Corrosion detection in aircraft structures using guided Lamb waves. http://www.ndt.net/article/tektrend/tektrend.htm, Vol. 1, No.11, Online Journal.
9.
Dietrich Jr., C.B. (2000). Adaptive arrays and diversity antenna configurations for handheld wireless communication terminals. PhD Dissertation, Virginia Tech.
10.
Doebling, S.W. , Farrar, C.R. , Prime, M.B. and Shevitz, D.W. (1996). Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: A literature review. Los Alamos National Laboratory Report LA-13070-MS.
11.
Feng, M.Q. , De Flasviis, F. and Kim, Y.J. (2002). Use of microwaves for damage detection of fiber reinforced polymer-wrapped concrete structures , Journal of Engineering Mechanics, 8(2), 172–183 .
12.
Frost III, O.L. (1972). An algorithm for linearly constrained adaptive array processing . In: Proceedings of the IEEE, Vol. 60, pp. 926–935 .
13.
Giurgiutiu, V. and Bao, J. (2002). Embedded ultrasonic structural radar with piezoelectric wafer active sensors for the NDE of thin-wall structures . In: Proceedings of IMECE, 2002 ASME International Mechanical Engineering Congress, New Orleans, LA, CD ROM, Paper # IMECE 2002-39017.
14.
Godara, L.C. (1997a). Application of antenna arrays to mobile communications, Part I: performance improvement, feasibility, and system considerations . Proceedings of the IEEE, 85(7), 1031–1060 .
15.
Godara, L.C. (1997b). Application of antenna arrays to mobile communications, Part II: beamforming and direction-of-arrival considerations . Proceedings of the IEEE, 85(8), 1195–1245 .
16.
Graff, K.F. (1991). Wave Motion in Elastic Solids, New York: Dover Publications , pp. 24–32.
Johnson, D.H. and Dudgeon, D.E. (1993). Array Signal Processing: Concepts and Techniques, Englewood Cliffs, NJ: PTR Prentice-Hall .
19.
Kundu, T. , Potel, C. and de Belleval, J.-F. (2000). Near Lamb mode imaging of multilayered composite plates . In: Mal, A.K. (ed.), Proceedings of SPIE Nondestructive Evaluation of Aging Aircraft, Airports, and Aerospace Hardware IV, Vol. 3994, pp. 174–183 .
20.
Lakshmanan, K.A. and Pines, D.J. (1997). Modeling damage in rotorcraft flexbeams using wave mechanics . Smart Materials and Structures, 6, 383–392 .
21.
Lethiecq, M. , Pejot, C. , Berson, M. , Guillemet, P. and Roncin, A. (1984). An ultrasonic array-based system for real-time inspection of carbon-epoxy composite plates . NDT & E International, 27(6). 311–315 .
McNab, A. and Campbell, M.J. (1987). Ultrasonic phased arrays for nondestructive testing . NDT International, 6, 333–337 .
24.
Monzingo, R. and Miller, T. (1980). Introduction to Adaptive Antenna Systems, New York: Wiley and Sons .
25.
Nayfeh, A.H. (1995). Wave Propagation in Layered Anisotropic Media, Amsterdam: Elsevier Science , pp. 31–58.
26.
Pines, D.J. (1997). The use of wave propagation models for structural damage identification. In: Chang, F.-K. (ed.), Structural Health Monitoring: Current Status and Perspectives, International Workshop on Structural Health Monitoring, Stanford CA, Boca Raton, Florida: CRC Press Inc. , pp. 664–677.
27.
Rose, J.L. (1999). Ultrasonic Waves in Solid Media, London: Cambridge University Press .
28.
Rytter, A. (1993). Vibration based inspection of civil engineering structures. PhD Dissertation, Department of Building Technology and Structural Engineering, University of Aalborg, Denmark.
29.
Saravanos, D.A. and Heyliger, P.R. (1995). Coupled layerwise analysis of composite beams with embedded piezoelectric sensors and actuators . Journal of Intelligent Material Systems and Structures, 6, 350–363 .
30.
Schmerr Jr., L.W. (1998). Fundamentals of Ultrasonic Nondestructive Evaluation: A Modeling Approach, New York: Plenum Press .
31.
Sundararaman, S. and Adams, D.E. (2002). Phased transducer arrays for structural diagnostics through beamforming . In: Proceedings of the American Society for Composites 17th Technical Conference, W. Lafayette, IN, Oct. 21–23, 2002, Paper 177.
32.
Sundararaman, S. , Adams, D.E. and Rigas, E. (2003). Biologically inspired structural diagnostics through beamforming with phased transducer arrays . International Journal of Engineering Science (accepted for publication).
33.
Sundararaman, S. , Johnson, T.J. , Adams, D.E. and Rigas, E. (2003). Complementary methods for characterizing damage in heterogeneous structures . In: Paper Presented at The 16th US Army Symposium on Solid Mechanics, May 4–7, 2003, Charleston, SC.
34.
Sundararaman, S. (2003). Structural diagnostics through beamforming of phased arrays: characterizing damage in steel and composite plates. Masters Thesis, Purdue University.
35.
Van Veen, B.D. and Buckley, K.M. (1988). Beamforming: A versatile approach to spatial filtering. In: IEEE ASSP Magazine, April 1988, pp. 1–24.
36.
Widrow, B. and Stearns, S. (1985). Adaptive Signal Processing, Englewood Cliffs, NJ: Prentice-Hall .
37.
Wilcox, P. , Lowe, M. and Cawley, P. (2000). Lamb and SH wave transducer arrays for the inspection of large areas of thick plates . In: 15th World Conference on Nondestructive Testing, Roma, Italy, 15-21 Oct. 2000.
38.
Witt, P.N. , Reed, C.F. and Peakall, D.B. (1968). A Spider’s Web: Problems in Regulatory Biology, New York: Springer Verlag .
39.
Wooh, S.-C. and Wang, J. (2002). Nondestructive characterization of defects using a novel hybrid ultrasonic array sensor . NDT&E International, 35, 155–163 .
40.
Wooh, S.-C. and Shi, Y. (1998a). Influence of phased array element size on beamsteering behavior . Ultrasonics, 36, 737–749 .
41.
Wooh, S.-C. and Shi, Y. (1998b). Optimization of ultrasonic phased arrays. In: Thomson, D.O. and Chimenti, D.E. (eds), Review of Progress in Quantitative Nondestructive Evaluation, Vol. 17, pp. 883–890, New York: Plenum Press .
42.
Wooh, S.-C. and Shi, Y. (1999a). Optimum beam steering of linear phased arrays . Wave Motion, 29, 245–265 .
43.
Wooh, S.-C. and Shi, Y. (1999b). A simulation study of the beamsteering characteristics for linear phased arrays . Journal of Nondestructive Evaluation, 18(2), 39–57 .
