Detection of Rail Wheel Flats using Wavelet Approaches

Abstract

Sudden application of heavy traction/braking torque induces flats in rail wagon wheelsets. Flat wheels generate high frequency impact forces sufficient to cause severe damage to the rail head surface. Early detection of flats would facilitate re-profiling the wheels before they cause serious damage to critical rail components, such as switches, crossings, and insulated rail joints. Although there are many sensors available in the market to detect/record wagon accelerations, there are no powerful signal processing tools readily available to detect the presence of wheel flats from the recorded acceleration signatures. This study presents two wavelet approaches to overcome the difficulties in the on-board monitoring and detection systems of rail wheel flats using vibration signals. Signal average techniques, wavelet local energy average concept, and wavelet decomposition are employed in this study. A Matlab-Simulink based dynamic simulation system capable of modeling the wheel flats and track irregularities is also developed for predicting the wheelset/bogie frame acceleration time series. An analysis of the numerical simulation results demonstrates that the methods proposed in this study are effective for the on-board monitoring of wheel flats of sizes smaller than the condemning limits.

Keywords

rail wheel flat vibration monitoring wavelet approaches daubechies wavelets signal processing

Get full access to this article

View all access options for this article.

References

Nielsen, J.C.O. and Johansson, A. (2000). Out-of round railway wheels — a literature survey. Proc. Instn. Mech. Engrs , 214, Part F, 79—91.

Deuszkiewicz, P. and Radkowski, S. (2003). On-line condition monitoring of a power transmission unit of a rail vehicle. Mechanical Systems and Signal Processing, 7,1321-1334.

Skarlatos, D. , Karakasis, K. and Trochidis, A. (2004). Railway wheel fault diagnosis using fuzzy-logic method. Applied Acoustics, 65, 951—966.

Edwards, M.C. , Donelson, J. , III Zavis, W.M. , Prabhakaran, A. , Brabb, D.C. and Jackson, A.S. (2005). Improving freight rail safety with on-board monitoring and control systems. Proceedings of the 2005 ASME/IEEE Joint, 117—122.

Barke, D. and Ciu, W.K. (2005). Structural health monitoring in the railway industry: a review. Structural Health Monitoring, 4(1), 81—94.

Stewart, R.M. (1977). Some useful data analysis techniques for gearbox diagnostics. University of Southampton Report MHM/R/10/77, 1—5.

Forrester, B.D. (1996). Advanced vibration analysis techniques for fault detection and diagnosis in gear transmission systems. PhD Thesis, Australia: Swinburne University of Technology.

Peng, Z.K. and Chu, F.L. (2003). Application of the wavelet transform in machine condition monitoring and fault diagnostics: a review with bibliography. Mechanical Systems and Signal Processing, 18, 199—221.

Debnath, L. (2002). Wavelet Transforms and Their Application, pp. 361—399, Bosonton: Birkhäuser.

10.

The MathWorks, Inc. (2002). MATLAB V 6.5 Wavelet Toolbox Manual, Function List: scal2frq

11.

Kim, H. and Melhem, H. (2004). Damage detection of structures by wavelet analysis . Engineering Structures, 26, 347—362.

12.

Peng, Z.K. , Tse, P.W. and Chu, F.L. (2005). A comparison study of improved Hilbert-Huang transform and wavelet transform: application to fault diagnosis for rolling bearing . Mechanical Systems and Signal Processing, 19, 974—978.

13.

Jia, S. (2004). Dynamic modelling and diagnosis of spur gearbox faults. PhD Thesis, Australia: Curtin University of Technology .

14.

Lardies, J. and Gouttebroze, S. (2002). Identification of modal parameters using the wavelet transform. International Journal of Mechanical Sciences, 44, 2263—2283.

15.

Lin, J. and Zhang A. (2005). Fault feature separation using wavelet-ICA filter . NTD&E International, 38, 421—427.

16.

Prabhakar, S. , Mohanty, A.R. and Sekhar, A.S. (2002). Application of discrete transform for detection of ball bearing race faults. Tribology International, 35, 793—800.

17.

Sun, Y.Q. and Dhanasekar, M. (2002). A dynamic model for the vertical interaction of the rail track and wagon system. International Journal of Solids and Structures, 39, 1337—1359.

18.

Nielsen, J.C.O. and Oscarsson, J. (2004). Simulation of dynamic train-track interaction with state-dependent track properties. Journal of Sound and Vibration, 275, 515—532.

19.

Lei, X. and Noda, N.A. (2002). Analysis of dynamic response of vehicle and track coupling system with random irregularity of track vertical profile. Journal of Sound and Vibration, 258(1),147—165.

20.

Daubechies, I. (1992). Ten Lectures on Wavelets , 115p, 132p, 194p, 242p: The Society for Industrial and Applied Mathematics, Philadelphia, PA.