Pitch-catch Active Sensing Methods in Structural Health Monitoring for Aircraft Structures

Abstract

This study presents active sensing methods in structural health monitoring, for detecting cracks and debonds in metallic and composite structures, which can be potentially implemented into airframe structures. First, a pitch-catch method using a pair of piezoelectric actuator and sensor is introduced to generate a damage indeX which can be used to characterize damage at a known location. Tests on airbus fuselage panels are conducted to verify the method and damage indeX. The damage indeX relates changes in the energy content of a specific Lamb wave mode selected by group velocity analysis to the eXtent of damage. Second, an imaging method based on multiple pitch-catch information, a network of piezoelectric actuator/sensors, is presented for characterizing damage (location and size) without need for a structural or damage model. The imaging method with an autofocusing feature is applied to aluminum plates and a stiffened composite panel for method verification.

Keywords

structural health monitoring piezoelectric actuators Lamb waves delamination cracks diagnostic imaging

Get full access to this article

View all access options for this article.

References

Viktrov, I.A. (1967). Rayleigh and Lamb waves. Physical Theory and Applications, New York: Plenum Press.

Rose, J.L. (1999). Ultrasonic Waves in Solid Media, Cambridge University Press.

Alleyne, D.N. and Cawley, P. (1992). The interaction of Lamb waves with defects. IEEE Trans. Ultrasonics, Ferroelectrics, and Frequency Control, 39, 381—397.

Roh, Y.S. and Chang, F.-K. (1999). Built-in diagnostics for identifying an anomaly in plates using wave scattering. Ph.D. Dissertation , Stanford University: Department of Aeronautics and Astronautics.

Wang, C.S. and Chang, F.-K. (1999). Built-in diagnostics for impact damage identification of composite structures. Proceedings of the 3rd International Workshop on Structural Health Monitoring, Stanford, USA, pp. 612—621.

Chang, Z. and Mal, A. (1999). Scattering of Lamb waves from a rivet hole with edge cracks. Mechanics of Materials, 21, 197—204.

Kessler, S.S. , Spearing, S.M. and Soutis, C. (2002). Structural health monitoring in composite materials using Lamb wave methods. Smart Materials and Structures, 11, 269—278.

Ihn, J.-B. and Chang, F.-K. (2004). Detection and monitoring of hidden fatigue crack growth using a built-in piezoelectric sensor/actuator network: Part I. Diagnostics. Smart Materials and Structures , 13, 609—620.

Ihn, J.-B. and Chang, F.-K. (2004). Detection and monitoring of hidden fatigue crack growth using a built-in piezoelectric sensor/actuator network: Part II. Validation through riveted joints and repair patches. Smart Materials and Structures, 13, 621—630.

10.

Giurgiutiu, V. , Zagrai, A. and Bao, J. (2004). Damage identification in aging aircraft structures with piezoelectric wafer active sensors. Journal of Intelligent Material Systems and Structures, 15(9), 673—687.

11.

Boller, C. , Biemans, C. , Staszewski, W. , Worden, K. and Tomlinson, G. (1999). Structural damage monitoring based on an actuator-sensor system. Proceedings of SPIE Smart Structures and Integrated Systems Conference, Newport, CA.

12.

Beard, S. and Chang, F. -K. (1997). Active damage detection in filament wound composite tubes using built-in sensors and actuators. Journal of Intelligent Material Systems and Structures, 8(10), 891—897.

13.

Mast, T.D. (2002). Aberration correction for time-domain ultrasound diffraction tomography. Journal of Acoustic Society of America , 112(1), 55—64.

14.

Mast, T.D., I., N.A. , and Waag , R.C. (1997). Focusing and imaging using eigenfunctions of the scattered operator. Journal of Acoustic Society of America, 102(2), 715—725.

15.

Wang, C.H. and Rose, L.R.F. (2002). Plate wave tomography for structural health monitoring. 29th Annual Progress Review on Quantitative Non-destructive Evaluation, Bellingham, WA.

16.

Wang, C.H. , Rose, J.T. and Chang, F.K. (2004). A synthetic time-reversal imaging method for structural health monitoring. J. of Smart Mater. Struct., 13, 413—423.

17.

Wang, C.H. , Rose, J.T. and Chang, F.K. (2003). A computerized time-reversal method for structural health monitoring. Proceedings of SPIE Conference on Smart Structures/NDE, San Diego, Vol. 5046, pp. 48—58.

18.

Fink, M. (1992). Time reversal of ultrasonic fields — Part I: Basic principles. IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, 39(5), 555—566.

19.

Bardos, C. and Fink, M. (2002). Mathematical foundations of the time reversal mirror. Asymptotic Analysis, 29(2), 157—182.

20.

Fink, M. (1999). Time-reversed acoustics. Scientific American, November, 91—97.

21.

Qian, S. and Chen, D. (1996). Joint Time-Frequency Analysis — Methods and Applications, Prentice Hall.

22.

Lin, M. , Qing, X. , Kumar, A. and Beard, S. (2001). SMART layer and SMART suitcase for structural health monitoring applications. Proceedings of SPIE Smart Structures and Materials, Newport Beach, Vol. 4332, pp. 98—106.