A Phased Array-based Method for Damage Detection and Localization in Thin Plates

Abstract

A method for damage localization based on the phased array idea has been developed. Four arrays of transducers are used to perform a beam-forming procedure. Each array consists of nine transducers placed along a line, which are able to excite and register elastic waves. The A₀ Lamb wave mode has been chosen for the localization method. The arrays are placed in such a way that the angular difference between them is 45° and the rotation point is the middle transducer, which is common for all the arrays. The idea has been tested on a square aluminium plate modeled by the Spectral Element Method. Two types of damage were considered, namely distributed damage, which was modeled as stiffness reduction, and cracks, modeled as separation of nodes between selected spectral elements. The plate is excited by a wave packet. The whole array system is placed in the middle of the plate. Each linear phased array in the system acts independently and produces maps of a scanned field based on the beam-forming procedure. These maps are made of time signals (transferred to space domain) that represent the difference between the damaged plate signals and those from the intact plate. An algorithm was developed to join all four maps. The final map is modified by proposed signal processing algorithm to indicate the damaged area of the plate more precisely. The problem for damage localization was investigated and exemplary maps confirming the effectiveness of the proposed system were obtained. It was also shown that the response of the introduced configuration removes the ambiguity of damage localization normally present when a linear phased array is utilized. The investigation is based exclusively on numerical data.

Keywords

phased array damage localization structural health monitoring elastic waves

Get full access to this article

View all access options for this article.

References

Zak, A. , Krawczuk, M. and Ostachowicz, W. (2006). Propagation of in-plane waves in an isotropic panel with a crack. Finite Elem. Anal. Des., 42, 929-941.

Zak, A. , Krawczuk, M. , Ostachowicz, W. , Kudela, P. and Palacz, M. (2006). Elastic wave propagation in a cracked isotropic plate. In: Guemes, A. (ed.), Proc. Third European Workshop on Structural Health Monitoring , Granada, Spain, 5-7 July, Lancaster , Pennsylvania USA: DEStech Publications, pp. 316-323.

Peil, U. and Loppe, S. (2006). Detection of structural changes by means of piezo disc. In: Guemes, A. (ed.), Proc. Third European Workshop on Structural Health Monitoring , Granada, Spain, 5-7 July, Lancaster , Pennsylvania USA: DEStech Publications, pp. 133-140.

Yu, L. and Giurgiutiu, V. (2005). Advanced signal processing for enhanced damage detection with piezoelectric wafer active sensors. Smart Structures and Systems, 1, 185-215.

Giurgiutiu, V. and Bao, J. (2004). Embedded-ultrasonic structural radar for in-situ structural health monitoring of thin-wall structures. Structural Health Monitoring, An International Journal, 3, 121-140.

Pena, J. , Melguizo, C.P. , Martinez-Ona, R. , Ullate, Y.G. , de Espinosa Freijo, F.M. and Kawiecki, G. (2006). Advanced phased array system for structural damage detection. In: Guemes, A. (ed.), Proc. Third European Workshop on Structural Health Monitoring , Granada, Spain, 5-7 July, Lancaster, Pennsylvania, USA: DEStech Publications, pp. 244-250.

Shi-Chang, W. and Yijun, S. (1999). Optimum beam steering of linear phased arrays. Wave Motion, 29, 245-265.

Sundararaman, A. , Adams, D.E. and Rigas, E.J. (2005). Biologically inspired structural diagnostics through beamforming with phased transducers arrays . Int. J. Eng. Sci., 43, 756-778.

Fomme, P. , Wilcox, P. , Lowe, M. and Cawley, P. (2004). Development of a permanently attached guided ultrasonic waves array for structural integrity monitoring. In: CD-ROM Proc. 16th World Conference on NDT, Montrteal, Canada, 30 August to 3 September.

10.

Deutsch, W.A.K. , Cheng, A. and Achenbach, J.D. (1997). Self-focusing of Rayleigh waves and Lamb waves with a linear phased array. Res. Nondestruct. Eval., 9, 81-95.

11.

Purekar, A.S. and Pines, D.J. (2001). Interrogation of beam and plate structures using phased array concepts. In: Proc. of 12th International Conference on Adaptive Structures and Technology , University of Maryland, College Park, MD, 12-14 October, pp. 275-288.

12.

Greve, D.W. , Neumann, J.J. , Nieuwenhuis, J.H. , Oppenheim, I.J. and Tyson, N.L. (2005). Use of Lamb waves to monitor plates: experiments and simulations. In: Masayoshi, T. (ed.), Smart Structures and Materials 2005: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems , San Diego, CA, USA, 7 March, Vol. 5765, pp. 281-292.

13.

Su, Z. , Ye, L. and Lu, Y. (2006). Guided Lamb waves for identification of damage in composite structures: a review. J. Sound Vibrat., 295, 753-780.

14.

Yu, L. and Giurgiutiu, V. (2007). In-situ optimized PWAS phased arrays for Lamb wave structural health monitoring, Journal of Mechanics of Materials and Structures, 2(3), 459-488.

15.

Wandowski, T. , Malinowski, P. and Ostachowicz , W. (2007). Influence of transducer number on damage localisation using multi-phased array . In: 17th International Conference on Computer Methods in Mechanics, 19-22 June, Lodz-Spala, Poland.