Onset of Resin Micro-Cracks in Unidirectional Glass Fiber Laminates with Integrated SHM Sensors: Experimental Results

Abstract

This article presents the results of experiments conducted in order to identify and locate the failure initiation in glass fiber/epoxy laminates with integrated structural health monitoring sensors (SHM) and electronics. Recent advances in health monitoring technologies have resulted in the development of micro-dimensional devices that can be embedded into composite laminates. Notwithstanding their small size, such inclusions may affect the response of the composite. Damage induced by the peak values of stress concentration around the embedded inclusion is, in fact, one of the main concerns in smart structures technology. To address this specific issue, unidirectional S2 glass fiber/epoxy laminated composites are fabricated with embedded small implants that mimic potential sensors and microprocessors. Quasi-static tensile tests are then performed on those samples while monitoring them by the acoustic emission (AE) technique. Additionally, the microstructure of the material with and without implants is explored. The AE results show that early low-medium amplitude events are detected at the implant location and the micrographic inspections reveal that micro-cracks initiate at the device-composite matrix interface and grow around the implant causing the debond of the external component from the surrounding resin system.

Keywords

structural health monitoring embedded device stress concentration composites acoustic emissions matrix micro-cracking

Get full access to this article

View all access options for this article.

References

Warkentin, J. and Crawley, E.F. ( 1991). Embedded electronics for intelligent structures. Proceedings of 32nd AIAA/ASME/ASCE/AHS/ASC, pp. 1322-1331, Baltimore, MD.

Kim, K.-S. , Breslauer, M. and Springer, G. (1992). The effect of embedded sensors on the strength of composite laminates. Journal of Reinforced Plastic and Composites, 11, 949-958.

Singh, D.A. and Vizzini, A. ( 1994). Structural integrity of composite laminates with interlaced actuators. Smart Materials and Structures, 3, 71-79.

Shukla, D.R. and Vizzini, A. (1996). Interlacing for improved performance of laminates with embedded devices. Smart Materials and Structures, 5, 225-229.

Hansen, J.P. and Vizzini, A. (2000). Fatigue Response of a host structure with interlaced embedded devices. Journal of Intelligent Materials and Structures, 11, 902-909.

Ghasemi-Nejhad, M.N. , Russ, R. and Pourjalali, S. (2005). Manufacturing and testing of Active composite panels with embedded piezoelectric sensors and actuators . Journal of Intelligent Material Systems and Structures, 16, 319-333.

Mall, S. and Coleman, J.M. ( 1998). Monotonic and fatigue loading behavior of quasi-isotropic graphite/ epoxy laminate embedded with piezoelectric sensor. Smart Materials and Structures, 7, 822-832.

Paget, C.A. and Levin, K. ( 1999). Structural integrity of composites with embedded piezoelectric ceramic transducer. Proceedings of SPIE, 3668, 306-313.

Mall, S. ( 2002). Integrity of graphite/epoxy laminate embedded with piezoelectric sensor/actuator under monotonic fatigue loads. Smart Materials and Structures, 11, 527-533.

10.

Holl, M. and Boyd, S. ( 1993). The effects of embedded fiber optics on the mechanical properties of a composite host material. Proceedings of SPIE , 1916, 109-117.

11.

Sirkis, J.S. and Singh, H. (1994). Moiré analysis of thick composites with embedded optical fibers. Experimental Mechanics, 34(4), 300-305.

12.

Czarnek, R. , Guo, Y. , Bennet, K.D. and Claus, R.O. (1988). Interferometric measurements of strain concentrations induced by an optical fiber embedded in a fiber reinforced composite. Proceedings of SPIE, 1170, 43-54.

13.

Salehi, A. , Tray, A. , Wilson, D. and Smith, D. ( 1989). Strain concentration factors around optical fibers by fem and Moiré interferometry. Proceedings of 5th ASM ESD, pp. 11-19, Dearbon, MI.

14.

Dasgupta, A. , Wan, Y. and Sirkis, J.S. (1992). Prediction of resin pocket geometry for stress analysis of optical fibers embedded in laminated composites. Smart Materials Structures, 1, 101-107.

15.

Shivakumar, K. and Emmanwori, L. (2004). Mechanics of failure of Composite Laminates with an embedded Fiber optic Sensor. Journal of Composite Materials, 38(8), 669-680.

16.

Shivakumar, K. and Emmanwori, L. (2005). Failure mechanisms of a composite laminate embedded with a fiber optic sensor. Journal of Composite Materials, 39(9), 777-798.

17.

Huang, Y. , Ghezzo, F. and Nemat-Nasser, S. ( 2007). Onset of resin micro-cracks in unidirectional glass fiber laminates with embedded SHM sensors: numerical analysis. Structural Health Monitoring, 8, 493-507.

18.

ASTM D 3039/D 3039M-00, Standard test method for tensile properties of polymer matrix composite materials.

19.

ASTM D 2584-02. Standard test methods for ignition loss of cured reinforced resins.

20.

PCI-2 Based AE system user’s manual physical acoustic corporation.

21.

ASTM E976-00. Standard guide for determining the reproducibility of acoustic emission sensor response.

22.

Daniel, I.M. and Ishai, O. ( 2006). Engineering Mechanics of Composite Materials, Oxford: Oxford University Press.

23.

Tan, S.C. ( 1994). Stress Concentration in Laminated Composites, Technomic Publishing Inc. Lancaster, Pennsylvania, USA.

24.

Lekhnitskii, S.G. ( 1968). Anisotropic Plates, New York: Gordon and Breach.

25.

Radon, J.C. and Pollock, A.A. (1972). Acoustic Emission and Energy transfer during crack propagation. Engineering Fracture Mechanics, 4, 295-310.

26.

Pollock, A.A. (1973). Acoustic Emission-2: Acoustic emission amplitudes. Non Destructive Testing, 6, 264-269.

27.

Gorman, M.A. and Prosser, W.H. (1991). AE source orientation by plate wave analysis. Journal of Acoustic Emission, 9(4), 283-288.

28.

Prosser, W.H. , Gorman, M.A. and Humes, D.H. (1999). Acoustic emission signal in thin plates produced by impact damage. Journal of Acoustic emission, 17(1-2), 29-36.

29.

Zhuang, X. and Yan X. ( 2006). Investigation of damage mechanisms in self reinforced polyethylene composites by acoustic emission. Composite Science and Technology, 66, 444-449.

30.

Woo, S.-C. and Choi, N.-S. (2007). Analysis of fracture process in single-edge notched laminated composites based on the high amplitude acoustic emission events. Composite Science and Technology , 67(7-8), 1451-1458.

31.

De Groot, P.J. , Wijnen, P.A.M. and Janssen , R.B.F. (1995). Real time frequency determination of acoustic emission for different fracture mechanisms in carbon/ epoxy composites. Composite Science and Technology, 55, 405-412.