Sensitivity Enhancement of Long-gage FBG Sensors for Macro-strain Measurements

Abstract

In our recent study, a structural health monitoring strategy based on distributed fiber optic sensing techniques has been proposed to utilize the strain responses throughout the full or some partial areas of structures to detect the arbitrary and unforeseen damage. However, to perform this strategy more effectively, there is an increasing demand for improving the ability of such sensors to measure small structural responses, especially for the cases such as damage identification based on ambient vibration tests, fatigue crack monitoring of steel structures and crack detection of reinforced concrete structures. This work puts forward a novel packaging design for long-gage fiber Bragg grating (FBG) sensors to enhance the measurement sensitivity of strain responses. The basic idea is to utilize two materials of different stiffness to package the in-tube optical fiber and impose the deformation within the gage length largely on the short-gage sensing part of FBG. Proof-tests indicate that the measurement sensitivity of the innovative FBG sensor can be artificially enhanced by adjusting the two recoating materials and their respective lengths. A series of tests are carried out to verify the ability of the improved sensors to detect small crack and measure slight vibration.

Keywords

long-gage FBG sensor macro-strain sensitivity enhancement crack detection small vibration measurement.

Get full access to this article

View all access options for this article.

References

Doebling, S.W. , Farrar, C.R. , Prime, M.B. and Shevita, D.W. ( 1996). Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: a literature review, USA: Los Alamos National Laboratory Report.

Sohn, H. , Farrar, C.R. , Hemez, F.M. , Shunk, D.D. , Stinemates, D.W. and Nadler, B.R. ( 2003). A review of structural health monitoring literature: 1996-2001, USA: Los Alamos National Laboratory Report.

Mufti, A. ( 2001). Manual No. 2 - guidelines for structural health monitoring , ISIS Canada.

Wu, Z. and Li, S. ( 2005). Structural damage detection based on smart and distributed sensing technologies (Keynote). In: Proceedings of the 2nd International Conference on Structural Health Monitoring of Intelligent Infrastructure, pp. 107-120.

Xu, M.G. , Geiger, H. and Dakin, J.P. (1996). Fiber grating pressure sensor with enhanced sensitivity using a glass-bubble housing. Electronics Letters, 32, 128-129.

Liu, L. , Zhang, H. , Zhao, Q. , Liu, Y. and Li, F. ( 2007). Temperature-independent FBG pressure sensor with high sensitivity. Optical Fiber Technology, 13, 78-80.

Yamate, T. , Ramos, R.T. , Schroeder, R.J. , Madhaven, R. and Udd, E. ( 2002). Transversely loaded Bragg grating pressure transducer with mechanically enhancing the sensitivity. In: Proceedings of OFS-15, Portland, Oregon, IEEE, pp. 535-539.

Ngoi, B.K.A. , Paul, J. , Zhao, L.P. and Fang, Z.P. (2004). Enhanced lateral pressure tuning of fiber Bragg gratings by polymer packaging. Optics Communications, 242, 425-430.

Ahmad, H. , Harun, S.W. , Chong, W.Y. , Zulkifli, M.Z. , Thant, M.M.M. , Yusof, Z. and Poopalan, P. ( 2006). High-sensitivity Pressure Sensor Using a Polymer-embedded FBG. Microwave and Optical Technology Letters, 50, 60-61.

10.

Cruz, J.L. , Dong, L. and Reekie, L. ( 1996). Improved thermal sensitivity of fiber Bragg gratings using a polymer overlayer. Electronics Letters, 32, 385-387.

11.

Cusano, A. , D’Addio, S. , Cutolo, A. , Campopiano, S. , Balbi, M. , Balzarini, S. and Giordano, M. ( 2007). Enhanced acoustic sensitivity in polymeric coated fiber Bragg grating. Sensors & Transducers, 82, 1450-1457.

12.

Li, S.Z. and Wu, Z.S. (2007). Development of distributed long-gauge fiber optic sensing system for structural health monitoring. Structural Health Monitoring, 6, 133-143.