A low-cost electromechanical impedance-based SHM architecture for multiplexed piezoceramic actuators

Abstract

The electromechanical impedance (EMI) method has been regarded as a promising tool for structural health monitoring (SHM) in real time. Usually, massive, high-cost, single-channel impedance analyzers are used to process the time domain data, aiming at obtaining the complex, frequency-dependent, EMI functions, from which features related to the presence, position, and extent of damage can be extracted. However, for large structures, it is desirable to deploy an array of piezoelectric transducers over the area to be monitored and interrogate these transducers successively so as to increase the probability of successful detection of damage in an early phase. In this context, a miniaturized, low-cost, highly expandable SHM architecture for monitoring an array of multiplexed piezoelectric transducers is proposed. Each logical block of the proposed architecture is presented in detail. The proposed architecture does not use costly fast Fourier transform analyzers/algorithms nor requires a digital computer for processing. A personal computer is only necessary for user interfacing. It has been verified that the system can work for frequencies ranging from 0 to 400 kHz with high accuracy and stability. A prototype using inexpensive integrated circuits and a digital signal processor was built and tested for two different types of structures: an aluminum beam and an aircraft aluminum panel. Simulated damages were introduced to each structure and the detection performance of the prototype was tested. The actual prototype uses a universal serial bus connection to communicate with a personal computer; however, a WiFi^® connection is also available.

Keywords

electromechanical impedance piezoelectric transducer structural health monitoring DSP

Get full access to this article

View all access options for this article.

References

Chaudhry Z. , Lalande F. , Ganino F. , Rogers CA and Chung J. Monitoring the integrity of composite patch structural repair via piezoelectric actuators/sensors. In: Proceedings of AIAA/ASME/ASCE/AHS/ASC 36th Structures, Structural Dynamics and Materials Conference, Adaptive Structures Forum, New Orleans, LA , 10-13 April 1995, AIAA Publishing , pp. 2243-2248.

Giurgiutiu V. , Reynolds A. and Rogers CA Experimental investigation of E/M impedance health monitoring of spot-welded structural joints. J Intell Mater Syst Struct 1999; 10: 802-812.

Lalande F. , Childs B. , Chaudhry Z. and Rogers CA Highfrequency impedance analysis for NDE of complex precision parts . In: Proceedings of SPIE Conference on Smart Structures and Materials, Vol. 2717, San Diego, CA, 26-29 February 1996, SPIE Publishing , pp. 237-245.

Liang C. , Sun FP and Rogers CA Coupled electromechanical analysis of adaptive material systems: determination of the actuator power consumption and system energy transfer. J Intell Mater Syst Struct 1994; 5: 12-20.

Park G. , Kabeya K. , Cudney HH and Inman DJ Impedance-based structural health monitoring for temperature varying applications . JSME Int J, Ser A 1999; 42(2): 249-258.

Peairs DM , Park G. and Inman DJ Improving accessibility of the impedance-based structural health monitoring method. J Intell Mater Syst Struct 2004; 15(2): 129-139.

Sun F. , Chaudhry Z. , Liang C. and Rogers CA Truss structure integrity identification using PZT sensor-actuator . J Intell Mater Syst Struct 1995; 6: 134-139.

Park G. and Inman DJ Impedance-based structural health monitoring, monograph. In: Woo SC (ed.) Nondestructive testing and evaluation methods for infrastructure condition assessment. New York, NY: Kluwer Academic Publishers, 2001, pp. 35-38.

Raju V. Implementing impedance-based health monitoring, MSc Thesis , Virginia Tech, USA 1997.

10.

Moura Jr JRV and Steffen Jr V. Impedance-based health monitoring for aeronautic structures using statistical meta-modeling. J Intell Mater Syst Struct 2006; 17(11): 1023-1036.

11.

Stokes JP and Cloud GL The application of interferometric techniques to the nondestructive inspection of fiber-reinforced materials. Exp Mech 1993 ; 33: 314-319.

12.

Giurgiutiu V. and Zagrai AN Damage detection in thin plates and aerospace structures with the electro-mechanical impedance method. J Struct Health Monit 2005; 4: 99-118.

13.

Yang Y. , Yan Y. and Soh CK Practical issues related to the application of the electromechanical impedance technique in the structural health monitoring of civil structures: I. Experiment . Smart Mater Struct 2008; 17035008 (14pp).

14.

Peairs DM , Tarazaga PA and Inman DJ A study of the correlation between PZT and MFC resonance peaks and damage detection frequency intervals using the impedance method. International Conference on Noise and Vibration Engineering , Leuven, Belgium, 18-20 September 2006, pp. 909-924.

15.

Soh CK , Tseng K. , Bhalla S. and Gupta A. Performance of smart piezoceramic patches in health monitoring of a RC Bridge . J Smart Mater Struct 2000; 9: 533-542.

16.

Park G. , Cudney H. and Inman DJ Feasibility of using impedance-based damage assessment for pipeline systems . Earthquake Eng Struct Dyn J 2001 ; 30(10): 1463-1474.

17.

Finzi Neto RM , Steffen Jr V. , Rade DA and Gallo CA Proposal of a solid state switching and signal conditioning system for structural health monitoring based on piezoelectric sensors/actuators. In: PACAM XI - 11th Pan-American Congress of Applied Mechanics, 2010, Foz do Iguacçu, PR-Brazil.

18.

Woon CE and Mitchell LD Variations in structural dynamic characteristics caused by changes in ambient temperature: Part II. In: Analytical, Proceedings of 14th International Modal Analysis Conference, Dearborn, MI, 12-15 February 1996, SEM, pp. 972-980.

19.

Wang S. and You C. A circuit design for impedance-based structural health monitoring . J Intell Mater Syst Struct 2008; 19: 1029-1040.

20.

Radil T. , Ramos PM and Serra AC Impedance measurement with sine-fitting algorithms implemented in a DSP portable device. IEEE Trans Instrum Meas 2008; 57(1): 197-204.

21.

Ramos PM , Janeiro FM and Tlemcçani M. Recent developments on impedance measurements with DSP-based ellipse-fitting algorithms. IEEE Trans Instrum Meas 2009; 58(5): 1680-1689.

22.

Xu B. and Giurgiutiu V. A low-cost and field portable electromechanical (E/M) impedance analyzer for active structural health monitoring. In: Proceedings of 5th International Workshop on Structural Health Monitoring, Stanford University, Stanford, CA, 15-17 September 2005.

23.

Filho J. and Baptista FA New impedance measurement system for PZT based structural health monitoring . IEEE Trans Instrum Meas 2008; 58(10): 3602-3608.

24.

Palomino LV , Moura JRV , Tsuruta KM , Rade DA and Steffen V. Impedance-based health monitoring an mechanical testing of structures. to be published at Smart Struct Syst Int J, 2010.

25.

Palomino LV and Steffen Jr V. Damage metrics associated with electromechanical impedance technique for SHM applied to a riveted structure. In: Proceedings of COBEM2009 20th International Congress of Mechanical Engineering, 15-20 November 2009, Gramado-RS, Brazil.

26.

Witczak M. , Rybski R. and Kaczmarek J. Impedance measurement with the d-optimum experimental conditions. IEEE Trans Instrum Meas 2009; 58(8): 2535-2543.