Sensing optical fiber installation study for crack identification using a stimulated Brillouin-based strain sensor

Abstract

Stimulated Brillouin-based optical fiber sensors have been receiving increasing attention in recent times because of their ability to measure distributed strain at high spatial resolution. This study presents a methodical approach for understanding the structural behavior from measured strain distribution. A stress-transferring model, focusing on the tip of a crack in concrete, with stress transfer from the host structure to the sensing segment on the attached fiber, was investigated. The loss of information due to the limited spatial resolution of the sensor was also analyzed. An experimental study using a notched concrete prism demonstrated the effectiveness of the proposed model for crack identification, allowing the study to leverage the stimulated Brillouin-based sensor to crack quantification as well as detection and localization.

Keywords

Stimulated Brillouin scattering optical fiber sensor strain measurement distributed sensing stress transfer

Get full access to this article

View all access options for this article.

References

Ren

. Strain transferring analysis of fiber Bragg grating sensors. Opt Eng 2006; 45(2): 024402-1–024402-8.

Hameed

Fernando

Hetherington

. Investigation of strain transfer to a sensor protection system embedded in concrete using finite element analysis. Mater Struct 2002; 35: 557–563.

Ansari

Libo

. Mechanics of bond and interface shear transfer in optical fiber sensors. J Eng Mech 1998; 124(4): 385–394.

Duck

LeBlanc

. Arbitrary strain transfer from a host to an embedded fiber-optic sensor. J Smart Mater Struct 2000; 9(4): 492–497.

Wan

Leung

CKY

Olson

. Investigation of the strain transfer for surface-attached optical fiber strain sensors. J Smart Mater Struct 2008; 17(3): 1–12.

Ohno

Narusa

Kihara

. Industrial applications of the BOTDR optical fiber strain sensor. Opt Fiber Technol 2001; 7(1): 45–64.

Inaudi

Glisic

. Reliability and field testing of distributed strain and temperature sensors. Proc SPIE Smart Struct Mater 2006; 6167: 61671D1–61671D8.

Lanticq

Quiertant

Merliot

. Brillouin sensing cable: design and experimental validation. IEEE Sens J 2008; 8(7): 1194–1201.

Duck

Renaud

Measures

. The mechanical load transfer into a distributed optical fiber sensor due to a linear strain gradient: embedded and surface bonded cases. J Smart Mater Struct 1999; 8(2): 175–181.

10.

Cox

. The elasticity and strength of paper and other fibrous materials. Br J Appl Phys 1952; 3(3): 72–79.

11.

Teng

. Bond-slip models for FRP sheets/plates bonded to concrete. Eng Struct 2005; 27(6): 920–937.

12.

Hotate

Hasegawa

. Measurement of Brillouin gain spectrum distribution along an optical fiber using a correlation-based technique: proposal, experiment and simulation. IEICE Trans Electron 2000; E83-C(3): 405–412.

13.

Yao

Teng

Chen

. Experimental study on FRP-to-concrete bonded joints. Composites Part B 2005; 36(2): 99–113.

14.

Imai

Nakano

Kono

. Crack detection application for fiber reinforced concrete using BOCDA-based optical fiber strain sensor. J Struct Eng 2010; 136(8): 1001–1008.