This work investigated the use of ultrasonic wave propagation in a composite laminate to monitor transverse matrix cracking. It was found that the change in the signal’s power spectral density correlates to crack density increase, and its sensitivity was dependent on the actuator to sensor orientation. This orientation dependence was found to be the same as that of the laminate’s stiffness degradation. A crack density damage index model was developed that relates signal changes to laminate stiffness degradation due to transverse matrix cracks. With this damage index model, a matrix cracking monitoring system was proposed, implemented, and validated. The developed system requires a calibration test for the composite layup of interest and a minimum of one actuator and two sensors at different angle orientations. The calibration test and general approach steps are described and validated. The system’s crack density estimates match experimentally measured crack density values within established error bounds.
BeaumontPWRDimantRAShercliffHR.Failure processes in composite materials: getting physical. J Mater Sci2006; 41: 6526–6546.
2.
SuZYeLLuY.Guided Lamb waves for identification of damage in composite structures: a review. J Sound Vib2006; 295: 753–780.
3.
AbrateS.Matrix cracking in laminated composites: a review. Compos Eng1991; 1(6): 337–353.
4.
ShahidIChangF-K.Progressive failure analysis of laminated composites subjected to in-plane and shear loads. PhD Dissertation, Department of Aeronautics and Astronautics, Stanford University, Stanford, CA, 1993.
5.
HarrisCEAllenDHNottorfEW. Modelling stiffness loss in quasi-isotropic laminates due to microstructural damage. J Eng Mater: T ASME1988; 110: 128–133.
6.
NairnJAHuS.The initiation and growth of delaminations induced by matrix microcracks in laminated composites. Int J Fracture1992; 57: 1–24.
7.
TalrejaR.Damage development in composites: mechanisms and modelling. J Strain Anal Eng1989; 24(4): 215–222.
8.
HarrisA.Fatigue in composites. Cambridge: Woodhead Publishing, 2003.
9.
MuellerILarrosaCRoyS. An integrated diagnostic to prognostic SHM technology for structural health management. In: Proceedings of the 7th international workshop on structural health monitoring, September 2009, vol. 1, pp. 399–409. DEStech Publications, Inc.
10.
DjordjevicBB. Nondestructive test technology for composites. In: Proceedings of the 10th international conference of the Slovenian society for non-destructive testing, Ljubljana, 1–3 September 2009.
11.
LiuZForsythDSKomorowskiJP. Survey: state of the art in NDE data fusion techniques. IEEE T Instrum Meas2007; 56(6): 2435–2451.
12.
FarrarCRWordenK.An introduction to structural health monitoring. Philos T Roy Soc A2007; 365: 303–315.
13.
IhnJ-BChangF-K. Detection and monitoring of hidden fatigue crack growth using a built-in piezoelectric sensor/actuator network: I. Diagnostics. Smart Mater Struct2004; 13: 609–620.
14.
LinMQingXKumarA. SMART layer and SMART suitcase for structural health monitoring applications. In: Proceedings of SPIE 4332, smart structures and materials 2001: industrial and commercial applications of smart structures technologies, Newport Beach, CA, 14 June 2001, vol. 4332, pp. 98–106. Bellingham, WA: SPIE.
15.
PierceSGCulshawBMansonG. The application of ultrasonic Lamb wave techniques to the evaluation of advanced composite structures. In: Proceedings of SPIE 3986, smart structures and materials 2000: sensory phenomena and measurement instrumentation for smart structures and materials, Newport Beach, CA, 12 June 2000, vol. 3986, pp. 93–103. Bellingham, WA: SPIE.
16.
SealaMDSmithBTProsserWH.Lamb wave assessment of fatigue and thermal damage in composites. J Acoust Soc Am1998; 103(3): 2416–2424.
17.
WordenK.Rayleigh and Lamb waves—basic principles. Strain2001; 37(4): 167–172.
18.
IhnJ-BChangF-K. Detection and monitoring of hidden fatigue crack growth using a built-in piezoelectric sensor/actuator network: II. Validation using riveted joints and repair patches. Smart Mater Struct2004; 13: 621–630.
19.
IhnJ-BChangF-K.Pitch-catch active sensing methods in structural health monitoring for aircraft structures. Struct Health Monit2008; 7: 5–19.
20.
GeethaGKRathodVTChakrabortyN. Rapid localization and ultrasonic imaging of multiple damages in structural panel with piezoelectric sensor-actuator network. In: Proceedings of the 8th international workshop on structural health monitoring, September 2011, vol. 2, pp. 249–256. DEStech Publications, Inc.
21.
HeJXuB.Time-domain localized structural damage identification with incomplete excitation measurements. In: Proceedings of the 8th international workshop on structural health monitoring, September 2011, vol. 2, pp. 175–182. DEStech Publications, Inc.
22.
LiFPengHSunX. Wave propagation analysis in composite laminates containing a delamination using a three-dimensional spectral element method. Math Probl Eng2012; 2012: 659849 (19 pp.).
23.
MollJSchulteRTHartmannB. Multi-site damage localization in anisotropic plate-like structures using an active guided wave structural health monitoring system. Smart Mater Struct2010; 19(4): 045022.
24.
MujicaLERuizMPozoF. Damage detection index based on statistical inference and PCA. In: Proceedings of the 8th international workshop on structural health monitoring, September 2011, vol. 2, pp. 159–174. DEStech Publications, Inc.
25.
NgC-TVeidtM.Scattering of the fundamental anti-symmetric Lamb wave at delaminations in composite laminates. J Acoust Soc Am2011; 129(3): 1288–1296.
26.
ToyamaNYashiroSTakatsuboJ. Stiffness evaluation and damage identification in composite beam under tension using Lamb waves. Acta Mater2005; 53: 4389–4397.
27.
GibsonRF.Principles of composite material mechanics. Boca Raton, FL: CRC Press, 2011.
28.
LarrosaC.Monitoring matrix cracking in composite laminate using built-in piezoelectric sensors. Doctoral Dissertation, Stanford University, Stanford, CA, 2013.
29.
SaxenaAGoebelKLarrosaC, et al. Accelerated aging experiments for prognostics of damage growth in composite materials. In: Proceedings of the 8th international workshop on structural health monitoring, September 2011, vol. 2, pp. 1283–1291. DEStech Publications, Inc.
30.
LarrosaCCLonkarKShankarS. Damage classification in composite laminates; matrix micro-cracking and delamination. In: Proceedings of the 8th international workshop on structural health monitoring, September 2011, vol. 2, pp. 191–199. DEStech Publications, Inc.
31.
LarrosaCCJanapatiVRoyS. In-situ damage assessment of composite laminates via active sensor networks. In: Proceedings of the 2011 aircraft airworthiness and sustainment conference, San Diego, CA, 18–21 April 2011.
32.
ASTM D3039/D3039M-08. Standard test method for tensile properties of polymer matrix composite materials.
33.
ASTM D3479/D3479M-96:2007. Standard test method for tension-tension fatigue of polymer matrix composite materials.
34.
LarrosaCCChangF-K. Real time in-situ damage classification, quantification and diagnosis for composite structures. In: Proceedings of the 19th international congress on sound and vibration, Vilnius, 8–12 July 2012.
