In this paper, we propose an electrical impedance tomography (EIT)-based multifunctional surface sensing system, or sensing skin, for structural health monitoring. More specifically, the EIT-based sensing skin is developed for detecting and localizing the ingress of chlorides and cracking: two phenomena which are of concern in many structures, including reinforced concrete structures. The multifunctional sensing skin is made of two layers: one layer is sensitive to both chlorides and cracking, and the other layer is sensitive to cracking only. In the experiments, the sensing skin is tested on a polymeric and concrete substrate. The results demonstrate the feasibility of using the multifunctional multi-layer sensing skin for detecting and localizing corrosive elements and cracking, and for distinguishing between them.
KarhunenKSeppänenALehikoinenA. Electrical resistance tomography imaging of concrete. Cem Concr Res2010; 40: 137–145.
2.
KarhunenKSeppänenALehikoinenA. Electrical resistance tomography for assessment of cracks in concrete. ACI Mater J2010; 107(5): 523.
3.
Du PlooyRVillainGPalma LopesS. Electromagnetic non-destructive evaluation techniques for the monitoring of water and chloride ingress into concrete: A comparative study. Mater Struct2015; 48: 369–386.
4.
HallajiMSeppänenAPour-GhazM. Electrical resistance tomography to monitor unsaturated moisture flow in cementitious materials. Cem Concr Res2015; 69: 10–18.
5.
Pour-GhazM. Detecting damage in concrete using electrical methods and assessing moisture movement in cracked concrete. PhD Thesis, Purdue University, IN, USA, 2011.
6.
RaoufiKPour-GhazMPoursaeeA. Restrained shrinkage cracking in concrete elements: The role of substrate bond on crack development. J Mater Civil Eng2011; 23(6): 895–902.
7.
Pour-GhazMWeissWJ. Detecting the time and location of cracks using electrically conductive surfaces. Cem Concr Comp2011; 33(1): 116–123.
8.
Pour-GhazMPoursaeeASpraggR. Experimental methods to detect and quantify damage in restrained concrete ring specimens. J Adv Concr Tech2011; 9(3): 251–260.
9.
Pour-GhazMKimJNadukuruSS. Using electrical, magnetic and acoustic sensors to detect damage in segmental concrete pipes subjected to permanent ground displacement. Cem Concr Comp2011; 33(7): 749–762.
10.
Pour-GhazMWeissWJ. Application of frequency selective circuits for crack detection in concrete elements. J ASTM Int2011; 8(10): 1–11.
11.
Pour-GhazMBarrettTLeyT. Wireless crack detection in concrete elements using conductive surface sensors and radio frequency identification technology. J Mater Civil Eng2013; 26(5): 923–929.
12.
SchumacherTThostensonE. Development of structural carbon nanotube-based sensing composites for concrete structures. J Intell Mater Syst Struct2013; 10453 89X13505252.
13.
DharapPZhilingLNagarajaiahS. Nanotube film based on single-wall carbon nanotubes for strain sensing. Nanotech2004; 15: 379–382.
14.
LohKHouTLynchJ. Nanotube-based sensing skins for crack detection and impact monitoring of structures. In: 6th international workshop on structural health monitoring, Stanford, CA, 2007.
15.
HouT-CLohKJLynchJP. Spatial conductivity mapping of carbon nanotube composite thin films by electrical impedance tomography for sensing applications. Nanotech2007; 18(31): 315501.
16.
LohKHouTLynchJ. Carbon nanotube sensing skins for spatial strain and impact damage identification. J Nondestruct Eval2009; 28: 9–25.
17.
TallmanTNGungorSWangKW. Damage detection and conductivity evolution in carbon nanofiber epoxy via lectrical impedance tomography. Smart Mater Struct2014; 23(4): 045034.
18.
HallajiMPour-GhazM. A new sensing skin for qualitative damage detection in concrete elements: Rapid difference imaging with electrical resistance tomography. NDT & E INT2014; 68: 13–21.
19.
HallajiMSeppänenAPour-GhazM. Electrical impedance tomography-based sensing skin for quantitative imaging of damage in concrete. Smart Mater Struct2014; 23(8): 085001.
20.
SeppänenAHallajiMPour-GhazM. Electrical impedance tomography-based sensing skin for detection of damage in concrete. In: 11th European conference on non-destructive testing (ECNDT 2014), Prague, Czech Republic.
21.
TallmanTSemperlottiFWangK. Enhanced delamination detection in multifunctional composites through nanofiller tailoring. J Intell Mater Syst Struct2015; 26(18): 2565–2576.
22.
LaflammeSKolloscheMConnorJJ. Robust flexible capacitive surface sensor for structural health monitoring applications. J Eng Mech-ASCE2012; 139(7): 879–885.
23.
YaoYGlisicB. Detection of steel fatigue cracks with strain sensing sheets based on large area electronics. Sens2015; 15(4): 8088–8108.
24.
YaoYaoGlisicBranko. “Sensing sheets: Optimal arrangement of dense array of sensors for an improved probability of damage detection.”Structural Health Monitoring2015: 1475921715599049.
25.
TungSTYaoYGlisicBSensing sheet: The sensitivity of thin-film full-bridge strain sensors for crack detection and characterization. Meas Sci Tech2014; 25(7): 075602.
26.
HallajiMSeppänenAPour-GhazM. Electrical impedance tomography-based sensing skin for structural health monitoring. In: Structural health monitoring 2015.
27.
TawilDRyeDVelonakiM. Interpretation of the modality of touch on an artificial arm covered with an EIT-based sensitive skin. Int J Robot Res2012; 31(13): 1627–1641.
28.
YaoASoleimaniM. A pressure mapping imaging device based on electrical impedance tomography of conductive fabrics. Sens Rev2012; 32(4): 310–317.
29.
ChossatJ-BShinH-SParkY-L. Soft tactile skin using an embedded ionic liquid and tomographic imaging. J Mech Robot2015; 7(2): 021008.
30.
TallmanTGungorSWangK. Damage detection via electrical impedance tomography in glass fiber/epoxy laminates with carbon black filler. Struct Health Monit2015; 14(1): 100–109.
31.
BrownB. Electrical impedance tomography (EIT): A review. J Med Eng Tech2003; 27: 97–108.
32.
HolerD. Electrical impedance tomography: Methods, history and applications. Boca Raton, FL: CRC Press, 2010.
33.
MuellerJSiltanenS. Linear and nonlinear inverse problems with practical applications. Philadelphia, PA: SIAM, 2012.
34.
VauhkonenPVauhkonenMSavolainenT. Three-dimensional electrical impedance tomography based on the complete electrode model. IEEE Trans Bio-Med Eng1999; 46(9): 1150–1160.
35.
KaipioJSomersaloE. Statistical and computational inverse problems. New York, NY: Springer, 2005.
36.
RudinLIOsherSFatemiE. Nonlinear total variation based noise removal algorithms. Phys D Nonlin Phenom1992; 60(1): 259–268.
37.
HallajiM. Monitoring damage and unsaturated moisture flow in concrete with electrical resistance tomography (ERT). PhD Thesis, North Carolina State University, Raleigh, NC, USA, 2015.
