Monitoring and structural analysis of a rehabilitated box girder bridge based on long-gauge strain sensors

Abstract

Structural rehabilitation is playing an increasingly important role in civil engineering owing to issues with aging infrastructure. In this context, a feasible inspection and monitoring system is needed to draw up effective structural rehabilitation projects. This article presents a case study of a real box girder bridge strengthened via external post-tensioning. With the aim of evaluating the strengthening project and the structural behavior changes, a large-scale strain sensing system containing four sensing areas was installed on the bridge before strengthening, and the static and dynamic strain distribution changes were recorded during annual inspections. The text focuses on discussing and comparing the variations of strain distribution across the bridge before and after strengthening, as well as the yearly changes the rehabilitated bridge has undergone. From the measured strain responses, we accurately determined that the rehabilitated bridge had undergone an unexpected reduction in its flexural stiffness as well as a torsion action. Moreover, finite element analysis results of three different damage models are discussed to understand the detailed cause for this.

Keywords

Damage identification structural health monitoring fiber Bragg grating structural analysis rehabilitated structures

Get full access to this article

View all access options for this article.

References

Annual report on roads maintenance. Tokyo, Japan: Ministry of Land, Infrastructure, Transport and Tourism, 2015.

Matthew

Levinson

. Fix it first, expand it second, reward it third: a new strategy for America’s highways. Policy brief no. 2011-03 (The Hamilton Project). Washington, DC: Brookings Institution, 2011.

ISO 31000:2009. Risk management—principles and guidelines.

Koo

Lee

Yun

et al . Damage detection in beam-like structures using deflections obtained by modal flexibility matrices. In: Proceedings of the advances in science and technology, Hong Kong, 12–14 June 2008, vol. 56, pp. 483–488. Zurich: Trans Tech Publications.

Tennyson

. ISIS manual no. 2—guidelines for structural health monitoring. Toronto, ON, Canada: ISIS Canada.

Rücker

Hille

Rohrmann

. F08b: guideline for structural health monitoring. Berlin: Federal Institute of Materials Research and Testing (BAM), SAMCO, 2006.

Nguyen

Schommer

Maas

et al . Static load testing with temperature compensation for structural health monitoring of bridges. Eng Struct 2016; 127: 700–718.

Xin

Wang

et al . Experimental study on static characteristics of the bridge deck section under simultaneous actions of wind and rain. J Wind Eng Ind Aerod 2012; 107: 17–27.

Doebling

Farrar

Prime

et al . A review of damage identification methods that examine changes in dynamic properties. Shock Vib Dig 1998; 30: 91–105.

10.

Sohn

Farrar

Hemez

et al . A review of structural health monitoring literature: 1996–2001. Los Alamos National Laboratory Report LA-13976-MS. Los Alamos, NM: Los Alamos National Laboratory.

11.

. Development of distributed long-gage fiber optic sensing system for structural health monitoring. Struct Health Monit 2007; 6: 133–143.

12.

Zhang

Yang

. Development and performance evaluation of non-slippage optical fiber as Brillouin scattering-based distributed sensors. Struct Health Monit 2010; 9: 413–431.

13.

Dai

Liu

Leng

et al . A novel time-division multiplexing fiber Bragg grating sensor interrogator for structural health monitoring. Opt Laser Eng 2009; 47: 1028–1033.

14.

Majumder

Gangopadhyay

Chakraborty

et al . Fibre Bragg gratings in structural health monitoring—present status and applications. Sensor Actuat A: Phys 2008; 147: 150–164.

15.

Zhang

Hong

Tang

et al . Structural health monitoring of a steel stringer bridge with area sensing. Struct Infrastruct E 2014; 10(8): 1049–1058.

16.

Zhang

. Performance evaluation of BOTDR-based distributed fiber optic sensors for crack monitoring. Struct Health Monit 2008; 7: 143–156.

17.

Adewuyi

Xue

. Identification of damage in reinforced concrete columns under progressive seismic excitation stages. J Earthq Tsunami 2011; 5: 151–165.

18.

Adewuyi

. Modal macro-strain flexibility methods for damage localization in flexural structures using long-gage FBG sensors. Struct Control Hlth 2011; 18: 341–360.

19.

. Parametric estimation for RC flexural members based on distributed long-gauge fiber optic sensors. J Struct Eng: ASCE 2010; 136: 144–151.

20.

Adewuyi

. Vibration-based damage localization in flexural structures using normalized modal macrostrain techniques from limited measurements. Comput-Aided Civ Inf 2011; 26: 154–172.

21.

Zhang

Xia

Cheng

et al . Strain flexibility identification of bridges from long-gauge strain measurements. Mech Syst Signal Pr 62: 272–283.

22.

Kobayashi

Ohira

Toishi

et al . Inspection and counter-measures to PC-cable break of Myoukou-Bridge. J Bridge Found Eng 2011; 45(9): 32–38.

23.

Shen

Yang

et al . An improved conjugated beam method for deformation monitoring with a distributed sensitive fiber optic sensor. Struct Health Monit 2010; 9(4): 361–378.