Curing and subsurface damage monitoring of epoxy-based composites

Abstract

Multifunctional fiber-reinforced polymer composites that incorporate a suite of functionalities in addition to their load-carrying capability are receiving significant attention. One approach to realize multifunctional fiber-reinforced polymers is by infusing nanomaterials in the epoxy matrix to enhance their mechanical properties and to enable sensing functionality. However, fabrication of nanomaterial-enhanced epoxies remains challenging, since additives can hinder curing and affect their mechanical properties. Therefore, the objective of this study is to employ electrical capacitance tomography for monitoring curing and for quantifying subsurface damage in nanocomposite epoxies. The vision is that electrical capacitance tomography can be used as a portable, nondestructive evaluation tool for assessing composite curing during manufacturing or in the field (e.g. for repair patches). In short, electrical capacitance tomography uses a set of noncontact electrodes arranged to form a circle and interrogates a sensing area using different patterns of electric field excitations. Boundary capacitance measurements obtained simultaneously are used as inputs for solving the electrical capacitance tomography inverse problem to reconstruct the electrical permittivity distribution of the sensing area. The hypothesis is that the permittivity of nanocomposite epoxies would change during curing and due to damage. To test this hypothesis, this work focused on carbon nanotube–based epoxies, whose electrical properties are sensitive to strain. First, high-speed shear mixing and tip sonication were employed for dispersing carbon nanotubes in epoxy resin. Specimens were fabricated to confirm their strain-sensitive electromechanical properties. Second, electrical capacitance tomography was used to monitor nanocomposite epoxy curing, and the results confirmed the hypothesis that permittivity decreased with increasing curing time. Third, these results were then validated by directly measuring their electrical permittivity changes during curing and also using ultrasonic testing to estimate its elastic modulus at different curing times. Finally, nanocomposite epoxy specimens were damaged by drilling different-sized holes, and electrical capacitance tomography was able to identify the locations and sizes of the simulated damage.

Keywords

Carbon nanotube curing damage detection epoxy electrical capacitance tomography nanocomposite noncontact strain sensing subsurface

Get full access to this article

View all access options for this article.

References

Reddy

Sagar

. Two-dimensional theoretical modeling of anisotropic wear in carbon/epoxy FRP composites: comparison with experimental data. Int J Theor Appl Mech 2010; 6(1): 47–57.

Gupta

Fan

Loh

. Noncontact epoxy curing monitoring and subsurface damage detection. In: Proceedings of the 11th international workshop on structural health monitoring, Stanford, CA, 11–14 September 2017, pp. 2977–2984. Lancaster, PA: Destech Publications, Inc.

Kahandawa

Epaarachchi

Wang

et al . Use of FBG sensors for SHM in aerospace structures. Photonic Sens2012; 2(3): 203–214.

Hardis

Jessop

Peters

et al . Cure kinetics characterization and monitoring of an epoxy resin using DSC, Raman spectroscopy, and DEA. Compos Part A: Appl S 2013; 49: 100–108.

Lapique

Redford

. Curing effects on viscosity and mechanical properties of a commercial epoxy resin adhesive. Int J Adhes Adhes 2002; 22(4): 337–346.

Shigue

Dos Santos

Baldan

et al . Monitoring the epoxy curing by the dielectric thermal analysis method. IEEE T Appl Supercon 2004; 14(2): 1173–1176.

Todoroki

Omagari

Shimamura

et al . Matrix crack detection of CFRP using electrical resistance change with integrated surface probes. Compos Sci Technol 2006; 66(11): 1539–1545.

Loh

Hou

Lynch

et al . Carbon nanotube sensing skins for spatial strain and impact damage identification. J Nondestruct Eval 2009; 28(1): 9–25.

Gojny

Wichmann

Fiedler

et al . Evaluation and identification of electrical and thermal conduction mechanisms in carbon nanotube/epoxy composites. Polymer 2006; 47(6): 2036–2045.

10.

Shi

Nguyen

Suo

et al . Effect of nanoparticles on the anticorrosion and mechanical properties of epoxy coating. Surf Coat Tech 2009; 204(3): 237–245.

11.

Neitzert

Luigi

Andrea

Epoxy/MWCNT composite as temperature sensor and electrical heating element. IEEE Transactions on Nanotechnology 2011; 10(4): 688–693.

12.

Lachman

Wagner

HD.

Correlation between interfacial molecular structure and mechanics in CNT/epoxy nano-composites. Composites Part A: Applied Science and Manufacturing 2010; 41(9): 1093–1098.

13.

Karube

Arai

et al . Investigation on sensitivity of a polymer/carbon nanotube composite strain sensor. Carbon 2010; 48(3): 680–687.

14.

Soleimani

. Image and shape reconstruction methods in magnetic induction tomography and electrical impedance tomography. PhD Thesis, University of Manchester, Manchester, 2005.

15.

Chaplin

Pugsley

Van Der Lee

et al . The dynamic calibration of an electrical capacitance tomography sensor applied to the fluidized bed drying of pharmaceutical granule. Meas Sci Technol 2005; 16(6): 1281–1290.

16.

Huang

Plaskowski

Xie

et al . Tomographic imaging of two-component flow using capacitance sensors. J Phys E: Sci Instrum 1989; 22(3): 173–177.

17.

Jaworski

Dyakowski

. Application of electrical capacitance tomography for measurement of gas-solids flow characteristics in a pneumatic conveying system. Meas Sci Technol 2001; 12(8): 1109–1119.

18.

Yang

Chondronasios

Nattrass

et al . Adaptive calibration of a capacitance tomography system for imaging water droplet distribution. Flow Meas Instrum 2004; 15(5): 249–258.

19.

Waterfall

White

et al . Combustion imaging from electrical impedance measurements. Meas Sci Technol 1996; 7(3): 369–374.

20.

Dyakowski

York

Mikos

et al . Imaging nylon polymerisation processes by applying electrical tomography. Chem Eng J 2000; 77(1): 105–109.

21.

Al Hosani

Zhang

Soleimani

. A limited region electrical capacitance tomography for detection of deposits in pipelines. IEEE Sens J 2015; 15(11): 6089–6099.

22.

Gupta

Loh

. Numerical simulations of railroad track damage characterization using non-contact tomography. In: Proceedings of the 1st international workshop on structural health monitoring for railway system, Qingdao, China, 12–14 October 2016. Lancaster, PA: Destech Publications, Inc.

23.

Yin

Hutchins

. Non-destructive evaluation of composite materials using a capacitive imaging technique. Compos Part B: Eng 2012; 43(3): 1282–1292.

24.

Gupta

Fan

Loh

. Noninvasive monitoring of epoxy curing. IEEE Sens Lett 2017; 1(5): 1–4.

25.

Soleimani

Lionheart

. Nonlinear image reconstruction for electrical capacitance tomography using experimental data. Meas Sci Technol 2005; 16(10): 1987–1996.

26.

Gupta

Loh

. Noncontact electrical permittivity mapping and pH-sensitive films for osseointegrated prosthesis and infection monitoring. IEEE T Med Imaging 2017; 36: 2193–2203.

27.

Lee

Loh

. A 2D percolation-based model for characterizing the piezoresistivity of carbon nanotube-based films. J Mater Sci 2015; 50(7): 2973–2983.

28.

Ghodhbani

Maréchal

Duflo

. Ultrasound monitoring of the cure kinetics of an epoxy resin: identification, frequency and temperature dependence. Polym Test 2016; 56: 156–166.

29.

Carrozzino

Levita

. Calorimetric and microwave dielectric monitoring of epoxy resin cure. Polym Eng Sci 1990; 30(6): 366–373.