The excellent properties of advanced composite materials provide great opportunities for making industrial structures large-scale and intelligent. Liquid composite molding process is suitable for manufacturing complex large-scale composite structures and has the potential for low cost and mass production. In present work, the concept of Networked Elements for Resin Visualization and Evaluation network was developed to measure and monitor the manufacturing process in-situ. This paper investigates the capability of piezoelectric lead-zirconate-titanate sensors in the Networked Elements for Resin Visualization and Evaluation network to monitor two important parameters in liquid composite molding process, including the resin flow front and the progress of the reaction. The piezoelectric lead-zirconate-titanate sensor network can be integrated with a composite structure either installed on the interface between the mold and laminates or embedded inside the laminates during the liquid composite molding process. Experimental results demonstrated that the liquid composite molding process can be effectively monitored by the embedded Networked Elements for Resin Visualization and Evaluation network with a piezoelectric lead-zirconate-titanate sensor network.
LamYCJoshiSCLiuXL.Numerical simulation of the mould-filling process in resin-transfer moulding. Comp Sci Technol2000; 60(6): 845–855.
2.
DegenhardtRCastroSGArbeloMA, et al. Future structural stability design for composite space and airframe structures. Thin Walled Struct2014; 81: 29–38.
3.
TrochuFRuizEAchimV, et al. Advanced numerical simulation of liquid composite molding for process analysis and optimization. Comp Part A Appl Sci Manuf2006; 37(6): 890–902.
4.
LaurenziSCasiniAPocciD.Design and fabrication of a helicopter unitized structure using resin transfer moulding. Comp Part A Appl Sci Manuf2014; 67: 221–232.
5.
KonstantopoulosSHueberCAntoniadisI, et al. Liquid composite molding reproducibility in real-world production of fiber reinforced polymeric composites: a review of challenges and solutions. Adv Manuf Polym Comp Sci2019; 5(3): 85–99.
6.
ParkCHWooL.Modeling void formation and unsaturated flow in liquid composite molding processes: a survey and review. J Reinforc Plast Comp2011; 30(11): 957–977.
7.
KuentzerNSimacekPAdvaniSG, et al. Correlation of void distribution to VARTM manufacturing techniques. Comp Part A Appl Sci Manuf2007; 38(3): 802–813.
8.
KonstantopoulosSFausterESchledjewskiR.Monitoring the production of FRP composites: a review of in-line sensing methods. EXPRESS Polymer Lett2014; 8(11): 823–840.
9.
LuthyTErmanniP.Linear direct current sensing system for flow monitoring in liquid composite moulding. Comp Part A Appl Sci Manuf2002; 33(3): 385–397.
10.
CarlonePPalazzoGS.Unsaturated and saturated flow front tracking in liquid composite molding processes using dielectric sensors. Appl Comp Mater2015; 22(5): 543–557.
11.
TifkitsisKISkordosAA.A novel dielectric sensor for process monitoring of carbon fibre composites manufacture. Comp Part A Appl Sci Manuf2019; 123: 180–189.
12.
DanismanMTuncolGKaynarA, et al. Monitoring of resin flow in the resin transfer molding (RTM) process using point-voltage sensors. Comp Sci Technol2007; 67(3): 367–379.
13.
BuchmannCFilsingerJLadstätterE.Investigation of Electrical Time Domain Reflectometry for infusion and cure monitoring in combination with electrically conductive fibers and tooling materials. Comp Part B Eng2016; 94: 389–398.
14.
ShuMTakedaNTakedaSI, et al. Life cycle monitoring of large-scale CFRP VARTM structure by fiber-optic-based distributed sensing. Comp Part A Appl Sci Manuf2011; 42(6): 669–676.
15.
TsailJTDustindJSManssonJA.Cure strain monitoring in composite laminates with distributed optical sensor. Comp Part A Appl Sci Manuf2019; 125: 105503.
16.
EumSHKageyamaKMurayamaH, et al. Structural health monitoring using fiber optic distributed sensors for vacuum-assisted resin transfer molding. Smart Mater Struct2007; 16(6): 2627–2635.
17.
KinetDMégretPGoossenKW, et al. Fiber Bragg grating sensors toward structural health monitoring in composite materials: challenges and solutions. Sensors (Switzerland)2014; 14(4): 7394–7419.
18.
AliMAUmerRKhanKA, et al. Graphene coated piezo-resistive fabrics for liquid composite molding process monitoring. Comp Sci Technol2017; 148: 106–114.
19.
TuncolGDanismanMKaynarA, et al. Constraints on monitoring resin flow in the resin transfer molding (RTM) process by using thermocouple sensors. Comp Part A Appl Sci Manuf2007; 38(5): 1363–1386.
20.
Di FrattaCKlunkerFErmanniP. A methodology for flow-front estimation in LCM processes based on pressure sensors. Comp Part A Appl Sci Manuf2013; 47: 1–11.
21.
LinMChangF-K.The manufacture of composite structures with a built-in network of piezoceramics. Comp Sci Technol2002; 62(7–8): 919–939.
22.
SchmachtenbergESchultezurHeideJTopkerJ.Application of ultrasonics for the process control of resin transfer moulding (RTM). Polymer Testing2005; 24: 330–338.
23.
SkordosAAKarkanasPIPartridgeIK.A dielectric sensor for measuring flow in resin transfer moulding. Meas Sci Technol2000; 11(1): 25–31.
24.
CanalLPBenaventeMHausmannM, et al. Process-induced strains in RTM processing of polyurethane/carbon composites. Comp Part A Appl Sci Manuf2015; 78: 264–273.
25.
MauricioT.Parameters’ monitoring and in-situ instrumentation for resin transfer moulding: a review. Comp Part A Appl Sci Manuf2019; 124: 105500.
26.
PredoiMVCastaingsMHostenB, et al. Wave propagation along transversely periodic structures. Journal of the Acoustical Society of America2007; 121(4): 1935–1930.
27.
KoissinVDem EnkoČAKorneevVA.Isothermal epoxy-cure monitoring using nonlinear ultrasonics. Int J Adhesion Adhes2014; 52: 11–18.
28.
MaffezzoliAQuartaELupranoVAM, et al. Cure monitoring of epoxy matrices for composites by ultrasonic wave propagation. J Appl Polym Sci1999; 73(10): 1969–1977.
29.
LionettoFMaffezzoliA.Monitoring the cure state of thermosetting resins by ultrasound. Materials2013; 6: 3783–3804.
30.
PavlopoulouSSoutisCStaszewskiWJ.Cure monitoring through time-frequency analysis of guided ultrasonic waves. Plastic Rubber Comp2012; 41: 180–186.
31.
MizukamiKYoshimotoSOgiK.In-process acquisition of cure-dependent viscoelastic properties of carbon fiber reinforced composites using micromechanics-based guided wave analysis. Polymer Testing2018; 65: 459–467.
32.
SchubelPJCrossleyRJBoatengEKG, et al. Review of structural health and cure monitoring techniques for large wind turbine blades. Renew Energ2013; 51: 113–123.
33.
YenilmezBSozerEM.A grid of dielectric sensors to monitor mold filling and resin cure in resin transfer molding. Comp Part A Appl Sci Manuf2009; 40(4): 0–489.
34.
GeernaertTBeckerMMergoP, et al. Bragg grating inscription in GeO2-doped microstructured optical fibers. J Lightwave Technol2010; 28(10): 1459–1467.
35.
TorresMTellezRAHernandezH, et al. Mode I interlaminar fracture toughness of carbon-epoxy coupons with embedded ceramic sensors. Adv Polym Technol2017; 37(6): 2294–2302.
36.
QingXPBeardSJIkegamiR, et al. Aerospace applications of SMART Layer technology. In: BollerCChangF-KFujinoY (eds) Encyclopedia of structural health monitoring. New York: Wiley, 2009, pp. 1881–1896.
37.
QingXBeardSKumarK, et al. Advances in the development of built-in diagnostic system for filament wound composite structures. Comp Sci Technol2006; 66(11–12): 1694–1702.
38.
QingXWangYGaoL, et al. Distributed multifunctional sensor network for composite structural state sensing. Proc SPIE2012; 8345: 834530.
NedospasovIAMozhaevVGKuznetsovaIE.Leaky backward Lamb waves in various isotropic and anisotropic plate/liquid systems. In: IEEE international ultrasonics symposium (IUS 2016), 18September2016. New York: IEEE Computer Society.
41.
LeeYCKuoSH.Leaky Lamb wave of a piezoelectric plate subjected to conductive fluid loading: theoretical analysis and numerical calculation. J Appl Phys2006; 100(7): 129.
42.
ViktorovIA.Calculation of the phase velocity of surface waves on the boundary of a solid half-space with a liquid layer. Sov Phys Acoust1977; 23: 541–542.
43.
WuJ.The propagation of Lamb waves in a plate bordered with layers of a liquid. J Acoust Soc Am1992; 91(2): 861.
44.
ZheminZJianLWeiZ. Propagation of Lamb waves in a plate bordered with liquid layers. Acta Acustica1996; 21(2): 174–181.
45.
XiaoliangZZheminZGonghuanDU.Acoustic streaming induced by ultrasonic quasi-Lamb waves in a plate. Acta Acustica1999; 24(5): 463–469.
46.
LiuGQXiaoYCZhangH, et al. Probability-based diagnostic imaging for damage identification of stiffened composite panel. Acta Materiae Compositae Sinica2018; 2: 311–319.
47.
FarquharsonSCarignanJKhitrovV, et al. Development of a phase diagram to control composite manufacturing using Raman spectroscopy. Proc SPIE Int Soc Optic Eng2004; 5272(5272): 19–29.
48.
LionettoFRizzoRLupranoV, et al. Phase transformations during the cure of Unsaturated polyester resins. Mater Sci Eng A Struct2004; 370: 284–287.
49.
LionettoFColucciaGD’AntonaP, et al. Gelation of waxy crude oils by ultrasonic and dynamic mechanical analysis. Rheol Acta2007; 46: 601–609.
50.
SalowitzNPGuoZKimSJ, et al. Microfabricated expandable sensor networks for intelligent sensing materials. IEEE Sens J2014; 14(7): 2138–2144.
51.
FanZWangYSQiuXQ, et al. Design and manufacture technology of expandable multifunctional composite structure state sensing network. J Exp Mech2018; 33: 95–92.
52.
QingXLiWWangY, et al. Piezoelectric transducer-based structural health monitoring for aircraft applications. Sensors2019; 19: 545.
53.
QingXBeardSJKumarA, et al. Built-in sensor network for structural health monitoring of composite structure. J Intell Mater Syst Struct2007; 18: 39–49.
54.
YangSMHungCCChenKH.Design and fabrication of a smart layer module in composite laminated structures. Smart Mater Struct2005; 14(2): 315–320.
