A novel method of reducing the energy consumption of street lighting using electronic ballasts was simulated on 277 units of 250 W high pressure sodium (HPS) street lights for a month. The design of the electronic ballast is detailed. A control system was utilised to dim the lights at hours of reduced traffic. The energy consumption was compared to that of the conventional system. The electronic ballast operates at a higher frequency and corrects any power distortion in the supply. Together with the light dimming capability, the electronic ballast increased the efficiency of the lighting system resulting in a monthly saving of 10.7 MWh, giving a monthly equivalent carbon dioxide reduction of 6.1 tonnes. In Malaysia, this would translate to a monthly cost saving of 37.7%.
IsmailAZ. Development of National Green Technology, Kuala Lumpur: Malaysian Green Technology Corporation, 2010.
3.
Domingo-PerezFGil-de-CastroAFlores-AriasJMBellido-OuteirinoFJMoreno-MunozA. Low-rate wireless personal area networks applied to street lighting. Lighting Research and Technology2011; 43(2): 235–248.
4.
Pacific Energy Center. High pressure sodium lamps, Pacific Energy Center, 1997. Retrieved 15 June 2012, from http://www.pge.com/pec.
5.
El-Zahab EEA, Zobaa AF, Mahmoud HY. Power quality issues of fluorescent lamp circuits with magnetic ballast: Proceedings of the Eleventh International Middle East Power Systems Conference, El-Minia, Egypt, December 19–21, 2006, pp. 252–259.
6.
ChungHS-HHoN-MYanWTamP-WHuiSY. Comparison of dimmable electromagnetic and electronic ballast systems - An assessment on energy efficiency and lifetime. IEEE Transactions on Industrial Electronics2007; 54(6): 3145–3154.
7.
ShareefHMohamedAMohamedK. Development of voltage acceptability curves for fluorescent lighting systems. International Review of Electrical Engineering2010; 5(4): 1747–1753.
8.
Eley C, Tolen TM, Benya, JR, Rubinstein F, Verderber R. Advanced Lighting Guidelines, Final Report. Prepared for the U.S. Department of Energy, California Energy Commission, and Electric Power Research Institute, 1993.
9.
KazimierczukMKSzaraniecW. Electronic ballast for fluorescent lamps. IEEE Transactions on Power Electronics1993; 4: 386–395.
10.
EmanuelAEPerettoL. The response of fluorescent lamp with magnetic ballast to voltage distortion. IEEE Transactions on Power Delivery1997; 12(1): 289–295.
Liu H, Wang Y, Zhang X, Xu D, Guo L. Dimmable electronic ballast for 250W HPS lamp in street lighting with analog dimming interface circuit: Proceedings 22nd Annual IEEE Applied Power Electronics Conference, Anaheim, CA, 25 February–1 March, 2007, pp. 259–262.
13.
Lin BR, Hsieh YC. Dimming control of metal halide lamp with high power factor: Proceedings of the IEEE International Symposium on Industrial Electronics, Bled, Slovenia, July 12–16, 1999, pp. 590–595.
14.
WakabayashiFTCanesinCA. Electronic ballast for multiple fluorescent lamp systems. Electric Power Applications2007; 1(1): 49–58.
15.
Huang YT, Chen ST, Lee CR, Li HJ, Lee LL. Designs and implementation of the dimmable electronic ballast for metal-halide lamps: Proceedings of the 33rd Annual Conference of the Industrial Electronics Society, Taipei, Taiwan, November 5–8, 2007, pp. 1352–1356.
16.
TerayamaIUmezawaYOosatoTEnmotsuY. Dimmable electronic ballast for high wattage halide lamp. Journal of Light and Visual Environment2010; 34(1): 42–46.
17.
VimalaRBaskaranK. Electromagnetic interference filter design based on noise impedance measurements for switching power converters. International Review of Electrical Engineering2011; 6(2): 593–598.
18.
Jiang Y, Lee FC, van-Wyk JD, Liang Y, Liu W. An integrated electronic ballast for high intensity discharge (HID) lamps: 5th International Conference on Integrated Power Systems, Nuremberg, Germany, March 11–13, 2008, pp. 1–6.
KaraarslanAIskenderI. DSP microprocessor based on power factor correction to improve power quality of converters using predictive control. International Review of Electrical Engineering2011; 6: 512–521.
21.
MajithiaCADesaiAVPanchalAK. Harmonic analysis of some light sources used for domestic lighting. Lighting Research and Technology2011; 43(3): 371–380.
22.
DrinovskyJSvacinaJRaidaZ. Simple models of EMI filters for low frequency range. Radio Engineering2008; 17(3): 8–14.
23.
Omar MH, Abdul Rahman H, Majid MS, Hassan MY, Rosmin N. The reduction of total harmonic distortion and electromagnetic interference in high pressure sodium street lighting using single stage electronic ballast: Proceedings of the Power Engineering and Optimization Conference, Melaka, Malaysia, 2007: 230–235.
24.
GuptaRAAgarwalRSoniHAjayM. Design and simulation of single stage high PF electronic ballast with boost topology for multiple fluorescent lamps. International Journal of Recent Trends in Engineering2005; 2(5): 1–7.
Kang BS, Kim HJ. High power factor electronic ballast for high pressure sodium lamp: Proceedings of the IEEE Region 10 Conference, Cheju, Korea, September 15–17, 1999, pp. 887–890.
27.
ShenEB. Alternative topological approaches to the electronic lamp ballast. PhD thesis, Cambridge: Massachusetts Institute of Technology, 1997.
28.
ShenMQianZFangZP. Design of a two-stage low-frequency square-wave electronic ballast for HID lamps. IEEE Transactions on Industry Applications2003; 39(2): 424–430.
29.
ChunLMaussionPBhosleSZissisG. Characterization of acoustic resonance in a high-pressure sodium lamp. IEEE Transactions on Industry Applications2011; 47(2): 1071–1076.
Ahmed SMW, Eissa MM, Edress M, Abdel-Hameed TS. Experimental investigation of full bridge series resonant inverters for induction-heating cooking appliances: Proceedings of the 4th IEEE Conference on Industrial Electronics and Applications, Aswan, Egypt, March 12–15, 2008, pp. 3327–3332.
32.
Abdul Rahman H, Hassan MY, Majid MS, Nor KM, Atan A. Economic study on the effectiveness of photovoltaic street lighting in Universiti Teknologi Malaysia: Proceedings of the International Middle East Power System Conference, Egypt, 2008: 624–629.
33.
GaidonBKaanHMunroD. Photovoltaic in the Urban Environment: Lessons Learnt from Large-scale Projects, London, UK and Sterling, VA: Earthscan UK and USA, 2009.
