Thermoset co-injection moulding is a novel technology that might be an alternative for thermoset recycling. This paper describes some experiments on the sandwich moulding of two polyesters, a powder coating and a BMC using a new special design thermoset co-injection machine and manifold system. The first thermoset sandwich moulding has been made and a number of initial moulding problems are presented and discussed.
References
1.
SéldenR., Journal of Injection Moulding Technology, 1 (4), (1997), 189–203.
2.
SmithG.F. and EasterlowR.A., Plastics, Rubber and Composites Processing and Applications, 25, 3, (1996), 115–119.
3.
WhiteJ.L. and DeeH.B., Polymer Engineering and Science, 14, 3, (1974), 212.
4.
WhiteJ.L and LeeB.L., Polymer Engineering and Science, 15, 7, (July 1975), 481–485.
5.
SomnukP. and SmithG.F., SPE ANTEC ‘95, 760-764, Boston USA, (1995).
6.
YoungS.S., WhiteJ.L., ClarkE.S. and OyanagiY., SPE ANTEC, 163-165, New York USA, (1980).
7.
LeeD.J., IsayevA.I. and WhiteJ.L., SPE ANTEC ‘98, 346-350, Atlanta USA, (1998).
8.
SéldenR., Polymer Engineering and Science, 40, 5, (May 2000), 1165–1176.
9.
DerdouriA., Garcia-RéjonA., NguyenK.T. and SimardY., SPE ANTEC ‘99, 481-484, New York USA, (1999).
10.
RungseesantivanonW., PhD Thesis, University of Warwick Coventry UK, (December 2000).
11.
GoodshipV. and KirwanK., Plastics, Rubber and Composites, 30, 1, (2001), 11–15.
12.
TurngL.S., WangV.W. and WangK.K., ASME (Heat and Mass Transfer in Solidification Processing), 25, (1991), 113–119.
13.
ChenS.C., HsuK.F., HsuK.S. and JengM.C., SPE ANTEC ‘93, 82-86, New Orleans USA, (1993).
14.
SchlatterG., AgassantJ.F., DavidoffA. and VincentM., Polymer Engineering and Science, 39, 1, (1999), 78–88.
15.
PettersonJ. and NilssonP., Journal of Thermoplastic Composite Materials, 7, (January 1994), 56–63.
16.
GruskiewiczM. and ButlerK., Advances in Automotive Plastic Components and Technology, 104, (1995), 23–29.
17.
DzeskiewiczL.A. and RalstonJ.D., ANTEC ‘94, 931-934, San Francisco USA, 1994.
18.
KennerleyJ.R., FenwickN.J., PickeringS.J. and RuddC.D., SPE ANTEC ‘96, 890-894, Indianapolis USA, (1996).
19.
DonovanR.C., RabeK.S., MammelW.K. and LordH.A., Polymer Engineering and Science, 15, 11, (1975), 774–780.
20.
HunoldDietrich, SPE Thermoset Topical Conference: Thermoset for The Molder, Research Triangle Park, NC, (12-14 March 2001).
21.
BIP Limited, Product Data Beetle BMC Type G7B 5580, (Jan 2001).
22.
RidesM., In-line Measurement of Shear Viscosity Using an Injection Moulding Machine, National Physical Laboratory, UK, (1993).
