Transform Rice Husk and Recycled Polyethylene into High Performance Composites: Using a Novel Compatibilizer to Infiltratively Enhance the Interfacial Interactions
Available accessResearch articleFirst published online November, 2016
Transform Rice Husk and Recycled Polyethylene into High Performance Composites: Using a Novel Compatibilizer to Infiltratively Enhance the Interfacial Interactions
Rice husks are the fine crop residue used to prepare the industrial wood-like products by melt-blending with polymers. However, most wood-like products are highly filled with natural fibers in order to decrease the cost of the products, as it causes weak interfacial compatibility between the natural fibers and polymers. To successfully prepare a high performance wood-like product, the interfacial compatibility is the key problem that need to be solved. Moreover, the interfacial interactions at the gaps and voids around the natural fibers can enhance the interfacial compatibility of the composites. There is little research focusing on the interfacial interactions at these gaps and voids. In this paper, the multi-monomer graft copolymers of polyethylene (GPE) were used as the compatibilizers for the rice husk (RH) highly filled recycled polyethylene (rPE) composites. How the GPE affected the interfacial compatibility of the composites and the resulting mechanical properties, water resistance, thermal stability and rheological properties of rPE/RH composites were investigated. Results show that GPE could enhance the interfacial interactions of rPE/RH composites by infiltrating into the gaps and voids around RH. The strong interfacial interactions of the composites primarily came from the chemical reactions and physical interactions between RH and GPE. The mechanical properties, water resistance and thermal stability of the composites increased with the increase in GPE loadings. The preferable loadings of GPE were approximately at 8 phr. Meanwhile, GPE could improve the processing properties of the composites.
ThompsonR.C., MooreC.J., VomS.F.S., and SwanS.H., Plastics, the environment and human health: current consensus and future trends. Philosophical Transactions of the Royal Society of London Series B: Biological Sciences, 364(1526) (2009) 2153–2166.
2.
KajaksJ., KalninsK., ReihmaneS., BernavaA., Recycled thermoplastic polymer hot melts utilization for birch wood veneer bonding. Progress in Rubber plastics and Recycling Technology, 30(2) (2014) 87–102.
3.
MarquesM.F.V., LunzJ.N., AguiarV.O., GrafovaI., KemellM., VisentinF., SartoriA., and GrafovA., Thermal and mechanical properties of sustainable composites reinforced with natural fibers. Journal of Polymers and the Environment, 23(2) (2015) 251–260.
4.
WuQ.L., ChiK., WuY.Q., and LeeS., Mechanical, thermal expansion, and flammability properties of co-extruded wood polymer composites with basalt fiber reinforced shells. Materials & Design, 60 (2014) 334–342.
5.
HaqueM.M., HasanM., IslamM.S., and AliM.E., Physico-mechanical properties of chemically treated palm and coir fiber reinforced polypropylene composites. Bioresource Technology, 100(20) (2009) 4903–4906.
6.
FangY.Q., WangQ.W., GuoC.G., SongY.M., and CooperP.A., Effect of zinc borate and wood flour on thermal degradation and fire retardancy of polyvinyl chloride (PVC) composites, Journal of Analytical and Applied Pyrolysis, 100 (2013) 230–236.
7.
HamidM.R.Y., Ab GhaniM.H., and AhmadS., Effect of antioxidants and fire retardants as mineral fillers on the physical and mechanical properties of high loading hybrid biocomposites reinforced with rice husks and sawdust. Industrials Crops and Products, 40 (2012) 96–102.
8.
NourbakhshA., BaghlaniF.F., and AshoriA., Nano-SiO2 filled rice husk/ polypropylene composites: Physico-mechanical properties. Industrials Crops and Products, 33 (2011) 183–187.
9.
ZhaoQ., ZhangB.Q., QuanH., YamR.C.M., YuenR.K.K., and LiR.K.Y., Flame retardancy of rice husk filled high density polyethylene ecocomposites. Composites Science and Technology, 69 (2009) 2675–2681.
10.
YehS.K., HsiehC.C., ChangH.C., YenC.C.C., and ChangY.C., Synergistic effect of coupling agents and fiber treatments on mechanical properties and moisture absorption of polypropylene-rice husk composites and their foam. Composites Part A: Applied Science and Manufacturing, 68 (2015) 313–322.
11.
BabaeiI., MadanipourM., FarsiM., and FarajpoorA., Physical and mechanical properties of foamed HDPE/wheat straw flour/nanoclay hybrid composite. Composites Part B: Engineering, 56 (2014) 163–170.
12.
SaenghirunwattanaP., NoomhormA., and RungsardthongV., Mechanical properties of soy protein based “green” composites reinforced with surface modified corn husk fiber. Industrial Crops and Products, 60 (2014) 144–150.
13.
EtaatiA., PatherS., FangZ.P., and WangH., The study of fibre/matrix bond strength in short hemp polypropylene composites from dynamic mechanical analysis. Composites Part B: Engineering, 62 (2014) 19–28.
14.
Flores-HernandezM.A., GonzalezI.R., Lomeli-RamirezM.G., Fuentes-TalaveraF.J., Silva-GuzmanJ.A., Cerpa-GallegosM.A., and Garcia-EnriquezS., Physical and mechanical properties of wood plastic composites polystyrene-white oak wood flour. Journal of Composite Materials, 48(2) (2014) 209–217.
DanyadiL., JanecskaT., SzaboZ., NagyG., MoczoJ., and PukanszkyB., Wood flour filled PP composites: compatibilization and adhesion. Composites Science and Technology, 67 (2007) 2838–2846.
17.
OhJ.S., LeeS.H., and KimK.J., Effects of alkali treated nano-kenaf fiber in polypropylene composite upon mechanical property changes. Polymer-Korea, 39(1) (2015) 99–106.
18.
AbdelmoulehM., BoufiS., BelgacemM.N., and DufresneA., Short natural-fibre reinforced polyethylene and natural rubber composites: effect of silane coupling agents and fibres loading. Composites Science and Technology, 67(7-8) (2007) 1627–1639.
19.
DemirH., AtiklerU., BalkoseD., and TihminliogluF., The effect of fiber surface treatments on the tensile and water sorption properties of polypropylene–luffa fiber composites, Composites Part A: Applied Science and Manufacturing, 37(3) (2006) 447–456.
20.
MalakaniM., BazyarB., TalaiepourM., HemmasiA.H., and GhasemiI., Effect of acetylation of wood flour and MAPP content during compounding on physical properties, decay resistance, contact angle, and morphology of polypropylene/ wood flour composites, Bioresources, 10(2) (2015) 2113–2129.
21.
HaqueR., SaxenaM., ShitS.C., and AsokanP., Fibre-matrix adhesion and properties evaluation of sisal polymer composite. Fibers and Polymers, 16(1) (2015) 146–152.
22.
NaghmouchiI., MutjeP., and BoufiS., Olive stones flour as reinforcement in polypropylene composites: a step forward in the valorization of the solid waste from the olive oil industry, Industrial Crops and Products, 72 (2015) 183–191.
23.
BengtssonM., BaillifM.L., and OksmanK., Extrusion and mechanical properties of highly filled cellulose fibre–polypropylene composites, Composites Part A: Applied Science and Manufacturing, 38(8) (2007) 1922–1931.
24.
LiX., LeiB.R., LinZ.D., HuangL.H., TanS.Z., and CaiX., The utilization of bamboo charcoal enhances wood plastic composites with excellent mechanical and thermal properties. Materials & Design, 53 (2014) 419–424.
25.
LiX., LeiB.R., LinZ.D., HuangL.H., TanS.Z., and CaiX., The utilization of organic vermiculite to reinforce wood-plastic composites with higher flexural and tensile properties, Industrial Crops and Products, 51 (2011) 310–316.
26.
WongsoratW., SuppakarnN., and JarukumjornK., Effects of compatibilizer type and fiber loading on mechanical properties and cure characteristics of sisal fiber/natural rubber composites. Journal of Composite Materials, 48(19) (2014) 2401–2411.
27.
BettiniS.H.P., BiteliA.C., BonseB.C., and Morandim-GiannettiA.D., Polypropylene composites reinforced with untreated and chemically treated coir: Effect of the presence of compatibilizer, Polymer Engineering and Science, 55(9) (2015) 2050–2057.
28.
SobczakL., BrueggemannO., and PutzR.F., Polyolefin composites with natural fibers and wood-modification of the fiber/filler-matrix interaction. Journal of Applied Polymer Science, 127(1) (2013) 1–17.
29.
GaoH., XieY.J., OuR.X., and WangQ.W., Grafting effects of polypropylene/ polyethylene blends with maleic anhydride on the properties of the resulting wood–plastic composites. Composites Part A: Applied Science and Manufacturing, 43(1) (2012) 150–157.
30.
LiX., TabilL.G., and PanigrahiS., Chemical treatments of natural fiber for use in natural fiber-reinforced composites: a review. Journal of Polymers and the Environment, 15(1) (2007) 25–33.
31.
OuR.X., XieY.J., WolcottM.P., YuanF.P., and WangQ.W., Effect of wood cell wall composition on the rheological properties of wood particle/high density polyethylene composites, Composites Science and Technology, 93 (2014) 68–75.
32.
OuR.X., XieY.J., WolcottM.P., SuiS.J., and WangQ.W., Morphology, mechanical properties, and dimensional stability of wood particle/high density polyethylene composites: Effect of removal of wood cell wall composition. Materials & Design, 58 (2014) 339–345.
33.
HongH.Q., LiaoH.Y., ZhangH.Y., HeH., LiuT., and JiaD.M., Significant improvement in performance of recycled polyethylene/wood flour composites by synergistic compatibilization at multi-scale interfaces. Composites Part A: Applied Science and Manufacturing, 64 (2014) 90–98.
34.
HongH.Q., XuH.X., HeH., LiuT., and JiaD.M., Effect of ternary monomer graft copolymers on morphology and properties of rice husk filled polypropylene composites. Plastics Rubber Composites, 38(1) (2009) 21–26.
35.
HongH.Q., LiuT., HeH., JiaD.M., and ZhangH.Y., Effect of interfacial modifiers on physical properties and flammability properties of PE/wood composites, Polym Polymer Composites, 19(8) (2011) 639–645.
36.
DingC., JiaD.M., HeH., GuoB.C., and HongH.Q., How organo-montmorillonite truly affects the structure and properties of polypropylene. Polymer Testing, 24(1) (2005) 94–100.
37.
JiaD.M., LuoY.F., LiY.M., LvH., FuW.W., and CheungW.L.Synthesis and characterization of solid-phase graft copolymer of polypropylene with styrene and maleic anhydride. Journal of Applied Polymer Science, 78(14) (2000) 2482–2487.
38.
IslamM.S., HamdanS., HassanA., TalibZ.A., and SobuzH.R., The chemical modification of tropical wood polymer composites. Journal of Composite Materials, 48(7) (2014) 783–789.
39.
HongH.Q., LiuH., ZhangH.Y., HeH., LiuT., and JiaD.M., Improving the performances of polyethylene/sisal fiber composites by infiltratively compatibilizing the multi-scale interfaces. Composite Interfaces, 22(6) (2015) 489–502.
40.
LiQ., and MatuanaL.M., Effectiveness of maleated and acrylic acid functionalized polyolefin coupling agents for HDPE-wood-flour composites. Journal of Thermoplastic Composite Materials16 (2003) 551–564.
41.
LuJ.Z., NegulescuI.I., and WuQ., Maleated wood-fiber/high density polyethylene composites: coupling mechanisms and interfacial characterization. Composite Interfaces, 12(1-2) (2005) 125–140.
42.
HongH.Q., LiuH., ZhangH.Y., HeH., LiuT., and JiaD.M., Blossom morphology and correlative performance improvement of recycled polyethylene/wood flour composites with steam-activated interfaces. Bioresources, 10(4) (2015) 7817–7833.
