Suitability of Three Saws for Minimally Invasive Bone Cutting

Abstract

This study compares 3 different saw types to determine which is best suited for integration into a minimally invasive bone saw. A handheld electric jigsaw, a coping saw, and a Gigli saw were used to cut into porcine ilium. Heat generated was measured using a thermocouple, and forces applied during cutting were recorded using a force/torque sensor. The coping saw generated an average maximum temperature that was 26°C less than that generated using the jigsaw (P < .001) and 14°C less than that for the Gigli saw (P < .001). On average, the maximum force applied through the coping saw was 14 N less than that through the jigsaw (P < .001) and 18 N less than that through the Gigli saw (P < .001). Out of the 3 saws tested, the coping saw is optimal for cutting bone based on heat generation and required force.

Keywords

bone cutting minimally invasive surgery force sensing orthopedic surgery

Get full access to this article

View all access options for this article.

References

Lehman WB , Mohaideen A. , Madan S. , et al. Surgical technique for an "almost" percutaneous triple pelvic osteotomy for femoral head coverage in children 6-14 years of age. J Pediatr Orthop B. 2004;13:57-62.

Paley D. , Tetsworth K. Percutaneous osteotomies. Orthop Clin North Am. 1991;22:613-624.

Koyama T. , Sugano N. , Nishii T. , et al. Computer-assisted spherical osteotomy with a curved-bladed Tuke Saw. Comput Aided Surg. 2006;11:202-208.

Sakuma I. , Mukaiyama K. , Iordachita I. , et al. A bone cutting device for rotational acetabular osteotomy (RAO) with a curved oscillating saw. CARS. 2004;1268:632-637.

Tomita K. , Kawahara N. The threadwire saw: a new device for cutting bone, a brief note. J Bone Joint Surg. 1996;78: 1915-1917.

Bargar WL , Bauer A. , Borner M. Primary and revision total hip replacement using the Robodoc system. Clin Orthop Relat Res. 1998;354:82-91.

Castillo Cruces RA , Wahrburg J. Improving robot arm control for safe and robust haptic cooperation in orthopaedic procedures. Int J Med Robot Comp Asst Surg. 2007;3:316-322.

Maillet P. , Nahum B. , Blondel L. , et al. BRIGIT, a robotized tool guide for orthopedic surgery. In: IEEE International Conference on Robotics & Automation (ICRA). Barcelona, Spain: IEEE; 2005:211-215.

Rodriguez F. , Harris S. , Jakopec M. , et al. Robotic clinical trials of uni-condylar arthoplasty. Int J Med Robot Comp Asst Surg. 2005;1: 20-28.

10.

Shoham M. , Burman M. , Zehavi E. , et al. Bone-mounted miniature robot for surgical procedures: concept and clinical applications. IEEE Trans Rob Autom. 2003; 19:893-901.

11.

Sugita N. , Genma F. , Nakajima Y. , Mitsuishi M. Toolpath optimization for a milling robot for minimally invasive orthopedic surgery. In: IEEE International Conference on Robotics & Automation (ICRA). Los Alamitos, CA: 2007:2273-2278.

12.

Li S. , Chen S. , Branemark PI Heat shock-induced necrosis and apoptosis in osteoblasts. J Orthop Res. 1999;17: 891-899.

13.

Itoh S. , Ito Y. , Shikita T. Basic study on bone cutting forces for developing surgical instruments. Bull Jpn Soc Mech Eng. 1983;26:2295-2301.

14.

Mitsuishi M. , Warisawa S. , Sugita N. , et al. A study of bone micro-cutting characteristics using a newly developed advanced bone cutting machine tool for total knee arthroplasty. CIRP Ann Manuf Technol. 2007 ;54:41-46.

15.

Mitsuishi M. , Warisawa S. , Tajima F. , et al. Development of a 9 axes machine tool for bone cutting. CIRP Ann Manuf Technol. 2003;52:323-328.

16.

Rosner, B. Fundamentals of Biostatistics. 4th ed. Belmont, CA: Duxbury Press; 1995 .

17.

Wevers HW , Espin E. , Cooke TD Orthopedic sawblades: a case study. J Arthroplasty. 1987;2:43-46.

18.

Krause WR , Bradbury DW , Kelly JE , Lunceford EM Temperature elevations in orthopaedic cutting operations. J Biomech. 1982;15:267-275.