E-glass/Epoxy composites were fabricated using Vacuum Assisted Resin Infusion Moulding (VARIM) in fiber weight fractions of 40%, 45%, 50% and 55 percent. E-glass fiber in the form of 2D plain woven fabric of 320 gsm and 3D orthogonal woven non-crimp fabric with 1830 gsm were considered for reinforcement. Mechanical properties including tensile strength, flexural strength, impact strength and inter-laminar shear strength (ILSS) of both the composites were evaluated and compared to explore the possibility of 3D fabric as an alternative over the plain weave fabric. Improvement in mechanical properties was seen with increase in fiber content in both the composites. Results support the view that 3D orthogonal weave fabric can be used in lieu of plain weave fabric as it exhibited improved mechanical properties. Morphological studies were used to analyze the fracture mechanisms.
ArifinA. M. T.“Failure characterisation in polymer matrix composite for un-notched and notched (open-hole) specimens under tension condition”, Fibers and Polymers, Vol. 15, No. 8, 2014, pp. 1729–1738.
2.
SarikanatM.“Mechanical anisotropy in unidirectional glass fabric reinforced oligomeric siloxane modified polyester composites”, Fibers and Polymers, Vol. 13, No. 6, 2012, pp. 775–781.
3.
MazumdarS., Composites Manufacturing: Materials, Product, and Process Engineering, CRC press, 2001, p. 68
4.
AdumitroaieA., and EverJ. B., “Beyond plain weave fabrics–I. Geometrical model”, Composite Structures, Vol. 93, No. 5, 2011, pp. 1424–1432.
5.
GhasemnejadH., FurquanA. S. M., and MasonP. J., “Charpy impact damage behaviour of single and multi-delaminated hybrid composite beam structures”, Materials & Design, Vol. 31, No. 8, 2010, pp. 3653–3660.
6.
KistaiahN.“Mechanical characterization of hybrid composites: A review”, Journal of Reinforced Plastics and Composites, Vol. 33, No. 14, 2014, pp. 1364–1372.
7.
SathishkumarT. P., SatheeshkumarS, and NaveenJ, “Glass fiber-reinforced polymer composites–a review”, Journal of Reinforced Plastics and Composites, Vol. 33, No. 13, 2014, pp. 1258–1275.
8.
MallickP. K., “Fiber-reinforced Composites: Materials, Manufacturing, and Design”, CRC Press, 2007, pp. 581–582.
9.
WallenbergerF. T., WatsonJ. C., and LiH., “Glass fibers.”, ASM International, 2001, pp. 27–34.
10.
NaughtonB. P., PanhuizenF., and VermeulenA. C., “The elastic properties of chopped strand mat and woven roving in gr laminae”, Journal of Reinforced Plastics and Composites4.2 (1985): 195–204.
11.
CarvelliV.“Fatigue behavior of non-crimp 3D orthogonal weave and multi-layer plain weave E-glass reinforced composites”, Composites Science and Technology, Vol. 70, No. 14, 2010, pp. 2068–2076.
12.
SureshaB.“Mechanical and three-body abrasive wear behaviour of three-dimensional glass fabric reinforced vinyl ester composite”, Materials Science and Engineering: A, Vol. 480, No. 1, 2008, pp. 573–579.
13.
AktaşM.“Impact and post impact behavior of layer fabric composites”, Composite Structures, Vol. 94, No. 9, 2012, pp. 2809–2818.
14.
ZhangD.“A comparative study on low-velocity impact response of fabric composite laminates”, Materials & Design, Vol. 50, 2013, pp. 750–756.
15.
BeheraB. K., and DashB. P., “Mechanical behavior of 3D woven composites”, Materials & Design, Vol. 67, 2015, pp. 261–271.
16.
LiD.“Experimental study on the tension fatigue behavior and failure mechanism of 3D multi-axial warp knitted composites”, Composites Part B: Engineering, Vol. 68, 2015, pp. 126–135.
17.
BilisikK., and YolacanG., “Experimental characterization of multistitched two-dimensional (2D) woven E-glass/polyester composites under low-velocity impact load”, Journal of Composite Materials, Vol. 48, No. 17, 2014, pp. 2145–2162.
18.
ShivamurthyB., UdayaB. K., and AnandhanS., “Mechanical and sliding wear properties of multi-layered laminates from glass fabric/graphite/epoxy composites”, Materials & Design, Vol. 44, 2013, pp. 136–143.
19.
Siddhartha, and GuptaK., “Mechanical and abrasive wear characterization of bidirectional and chopped E-glass fiber reinforced composite materials”, Materials & Design, Vol. 35, 2012, pp. 467–479.
20.
ASTM D3039 / D3039M-14, Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials, ASTM International, West Conshohocken, PA, 2014, www.astm.org. DOI: 10.1520/D3039_D3039M-14.
21.
ASTM D7264 / D7264M-07, Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials, ASTM International, West Conshohocken, PA, 2007, www.astm.org. DOI: 10.1520/D7264_D7264M-15.
22.
ASTM D256–10, Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics, ASTM Inter-national, West Conshohocken, PA, 2010, www.astm.org. DOI: 10.1520/D0256–10
23.
ASTM D2344 / D2344M-13, Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates, ASTM International, West Conshohocken, PA, 2013, www.astm.org. DOI: 10.1520/D2344_D2344M.
24.
SatapathyA“Processing and characterization of jute-epoxy composites reinforced with SiC derived from rice husk”, Journal of Reinforced Plastics and Composites Vol. 29, No. 18, 2010, pp. 2869–2878.
