Moisture Storage Properties of Multi-Slotted Light-weight Ceramic Blocks: Comparison Between Two Manufacturers

Abstract

If sustainability criteria are to be applied properly in the construction sector it is essential to characterize the moisture capacity properties of building materials. This is the first step in studying the influence of moisture in the transmittance of exterior walls and in the occurrence of condensation, and in understanding the associated mechanisms of mechanical and chemical deterioration. Multi-slotted clay blocks are widely used in construction because of the special features entailed by their structure (e.g., better compressive strength and improved thermal and acoustic performance). However, depending on the type of additives used and on the manufacturing process characteristics (pressure of extrusion, drying time and temperature, baking process temperature, etc), moisture capacity properties may vary considerably from one type of material to another. This article determines the moisture capacity of two types of lightened clay made by different manufacturers. Differences are found, and one of them displays behavior not characteristic of clayey materials due to the additives used in its composition.

Keywords

porous materials moisture moisture capacity properties lightened clay.

Get full access to this article

View all access options for this article.

References

Carmeliet, J. and Roels, S. (2002). Determination of the Moisture Capacity of Porous Building Materials, Journal of Thermal Envelope and Building Science, 25, 209—237.

Carmeliet, J. , Roels, S. , Häupl, P. , Fechner, H. , Grunewald, J. , Plagge, R. and Houvenaghel, G. (2001). Material Properties. Final Report, Development of a New Methodology to Analyse the Durability of Façade Repair and Retrofitting Systems, Vol. 3. Catholic University of Leuven, Helsinki University of Technology, Technical University of Dresden .

Hens, H. (1991). IEA-Annex 14, Condensation and Energy, Final Report, Vol 3, ``Catalogue of Material properties'', Laboratory for Building Physics, KU Leuven, p. 200.

Kumaran, M.K. (1996). Heat, Air and Moisture Transport in Envelope Parts, Final Report, Task 3 Material Properties, IEA, ECBCS. Leuven.

Künzel, H.M. (1995). Simultaneous Heat and Moisture Transport in Building Components, One- and Two-Dimensional Calculation Using Simple Parameters. Dissertation, IRB-Verlag Fraunhofer-Institut für Bauphysik , Stuttgart .

Krus, M. (1996). Moisture Transport and Storage Coefficients of Porous Mineral Building Materials. Theoretical Principles and New Test Methods, Fraunhofer IRB Verlag .

Richards R.F. , Burch, D.M. and Thomas, W.C. (1992). Water Vapour Sorption Measurements of Common Building Materials , ASHRAE Transactions, 98(2): 475—485.

Roels, S. , Carmeliet, J. , Hens, H. , Adan, O. , Brocken, H. , Cerny, R. , Pavlik, Z. , Hall, C. , Kumaran, K. , Pel, L. and Plagge, R. (2004). Interlaboraory Comparison of Hygric Properties of Porous Building Materials, Journal of Thermal Envelope and Building Science, 27(4).

UNE-EN ISO 12571. (2000). Prestaciones higrotérmicas de los productos y materiales para edificios. Determinación de las propiedades de sorción higroscópica.