A three-dimensional transient finite element model was developed to evaluate the thermal performance of an attic radiant barrier system as an energy-efficient insulation technology. The finite element model simulates different heat transfer modes including convection, radiation, and conduction. Hourly experimental data collected in a housing complex in Zachary, LA, were used to validate the finite element analysis. Upon validation, the design variables and their influence on the performance of the radiant barrier insulation system were investigated. Among the different design variables, the presence of an air gap on both sides of the radiant barrier had a significant effect on the performance of the insulation system.
American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE) (2010) ASHRAE handbook. Fundamentals. Atlanta, GA: ASHRAE.
2.
ChenHLarsonTEriksonRW (1992) The performance of an attic radiant barrier for a simulated Minnesota winter. In: Proceedings of the thermal performance of the exterior envelopes of buildings conference, Clearwater, FL, December.
3.
ChenTSArmalyBFRamachandranN (1986) Correlations for laminar mixed convection flows on vertical, inclined, and horizontal flat plates. Journal of Heat Transfer-Transactions of the ASME108: 835–840.
4.
Dassault Systèmes (2009) ABAQUS User Manual: Version 6.9. Providence, RI: Dassault Systèmes/Simulia Corp.
5.
DuffieJABeckmanWA (1974) Solar Energy Thermal Processes. New York and London: Wiley-Interscience.
6.
FaireyPW (1985) The measured side-by-side performance of attic radiant barrier systems in hot, humid climates. In: Proceedings of the 19th international thermal conductivity conference, Cookeville, TN, October.
7.
GordonVRHolnessRE (2008) Improving energy efficiency in existing buildings. ASHRAE Journal50: 12–26.
8.
GossWPMillerRG (1989) Literature review and predictions of reflective building insulation system performance. ASHRAE Transactions95(2): 651–664.
9.
HallJA (1989) Performance testing of radiant barriers (RB) with R-11, R-19, and R-30 cellulose and rock wool insulation. In: Proceedings of the fifth annual symposium on improving building energy efficiency in hot and humid climates, Houston, TX, September, pp.174–185.
10.
HolmanJP (2002) Heat Transfer. Boston, MA and London: McGraw-Hill.
11.
JoyFA (1958) Improving attic space insulating values. ASHRAE Transactions64: 251–266.
12.
KatipamulaSO’NealDL (1986) An evaluation of the placement of radiant barriers on their effectiveness in reducing heat transfer in attics. In: Proceedings of the third annual symposium on improving building energy efficiency in hot and humid climates, pp.68–77.
13.
LevinsWPKarnitzMA (1987) Heating energy measurements of unoccupied single-family houses with attics containing radiant barriers. ORNL/CON-213. Oak Ridge, TN: Oak Ridge National Laboratory.
14.
MedinaMAYoungB (2006) A perspective on the effect of climate and local environmental variables on the performance of attic radiant barriers in the United States. Building and Environment41: 1767–1778.
15.
MedinaMAO’NealDLTurnerWD (1998a) A transient heat and mass transfer model of residential attics used to simulate radiant barrier retrofits, part I: development. Journal of Solar Energy Engineering-Transactions of the ASME120: 32–38.
16.
MedinaMAO’NealDLTurnerWD (1998b) A transient heat and mass transfer model of residential attics used to simulate radiant barrier retrofits, part II: validation and simulations. Journal of Solar Energy Engineering-Transactions of the ASME120: 39–44.
17.
Midwest Roofing Contractors Association (MRCA) (2006) Reflective Industry Continues to Grow. Available at: http://mrca.org/
18.
MoujaesSFAlsaieghNT (2000) Numerical heat transfer attic model using a radiant barrier system. Journal of Energy Engineering-ASCE126: 32–51.
19.
NebekerBMTongTW (1992) Heat transfer in rectangular reflective insulation systems. Journal of Building Physics16: 50–65.
20.
PeavyBA (1979) A model for predicting the thermal performance of ventilated attic. In: Summer Attic and Whole House Ventilation. NBS special publication 548, Washington, DC, pp. 119–149.
21.
RoelsSDeurinckM (2011) The effect of a reflective underlay on the global thermal behaviour of pitched roofs. Building and Environment46: 134–143.
22.
SparrowEMCessRD (1978) Radiation Heat Transfer. Washington, DC; London; Hemisphere; and New York: McGraw-Hill.
23.
US Department of Energy (2006) Buildings Energy Data Book. Available at: http://energy.gov/
