The building envelope of Mediterranean houses: Optimization of mass and insulation

Abstract

In a series of optimization studies, this article investigated the building envelope of a residential building as to have the most cost-effective and energy-efficient impact on the thermal performance of the buildings in Mediterranean. Building simulations were performed to optimize designs of the components of the building envelope. Specifically, the variables of mass and insulation in combination with other important design variables and parameters and their effect on the thermal response of the building, assessed during both heating and cooling modes, were studied, outlined, and discussed. The performance of the parameters and their efficiency were compared with each other, and their effectiveness was expressed in the constructional aspects for buildings.

Keywords

Thermal insulation thermal mass building envelope thermal effectiveness simulation tool

Get full access to this article

View all access options for this article.

References

Al-Homoud

(2004) The effectiveness of thermal insulation in different types of buildings in hot climates. Thermal Envelope and Building Science 27: 235–247.

Al-Sanea

Zedan

(2001) Effect of insulation location on initial transient thermal response of building walls. Journal of Building Physics 24: 275–300.

Anastaselos

Giama

Papadopoulos

(2009) An assessment tool for the energy, economic and environmental evaluation of thermal insulation solutions. Energy and Buildings 41: 1165–1171.

Athienitis

Santamouris

(2002) Thermal Analysis and Design of Passive Solar Buildings. London: James and James Ltd.

Bowman

Lomas

(1985) Empirical validation of dynamic thermal computer models of buildings. Building Services Engineering Research and Technology 6(4): 153–162.

Eryildiz

(2004) A comparative analysis of the built and project. In: PLEA 2004—the 21st conference on passive and low energy architecture, Eindhoven, The Netherlands 19–22 September (www.plea-arch.net).

Haves

(1983) SERI-RES: a Thermal Simulation Model for Passive Solar and Low Energy Buildings. In Design methods for Passive Solar Buildings Conf. UK-ISES (C34).

Haves

Littler

(1987) Refinements to SERI-RES. Etsu Report S-1130. Harwell: Energy Technology Support Unit for the Department of Energy ASRE.

Kalema

Jóhannesson

Pylsy

. (2008) Accuracy of energy analysis of buildings: a comparison of a monthly energy balance method and simulation methods in calculating the energy consumption and the effect of thermal mass. Journal of Building Physics 32: 101–130.

10.

Papadopoulos

(2005) State of the art in state of the art in thermal insulation materials and aims for future developments. Energy and Buildings 37: 77–86.

11.

Pietrzyk

(2010) Thermal Performance of a Building Envelope – A Probabilistic Approach. Journal of Building Physics 34: 77–96.

12.

Santamouris

(2005) Advances of Solar Energy, ISES. London: James and James Science Publishers.

13.

Santamouris

Balaras

Dascalaki

. (1996) Energy conservation and retrofitting potential in Hellenic Hotels. Energy and Building 24: 65–75.

14.

Santamouris

Kapsis

Korres

. (2007) On the Relation between the energy and social characteristics of the residential sector. Energy and Buildings 39(8): 893–905.

15.

Santamouris

Papanikolaou

Livada

. (2001) On the impact of urban climate on the energy consumption of buildings. Solar Energy 70(3): 201–216.

16.

Serghides

(1993) Zero energy of the Mediterranean houses, ISES ’93 Solar World Congress. Solar Architecture 7(2): 48–256.

17.

Serghides

(1996) Prototype solar house for Cyprus. EuroSun ’96 Internationales Sonnenforum 10: 1128–1130.

18.

Serghides

(2008) Integrated Design for the Zero Energy House and the Human Factor–PLEA 2008 Towards Zero Energy Building PLEA 2008, Conference Proceedings Paper ID. 745 (www.plea2008.org).

19.

Zold

Szokolay

(1997) Thermal Insulation. Brisbane, Australia: PLEA Passive and Low Energy Architecture International in association with Department of Architecture, University of Queensland, Design Tools and Techniques.