The moisture transfer effectiveness (or latent effectiveness) of a cross-flow, membrane-based energy recovery ventilator is measured and modeled. Analysis of in situ measurements for a full year shows that energy recovery ventilator latent effectiveness increases with increasing average relative humidity and surprisingly increases with decreasing average temperature. A simple finite difference heat and moisture transfer model is developed, which can explain these results and predict energy recovery ventilator latent effectiveness based on simplified physics and material properties. The model parameters are discussed and, in the case of the membrane’s moisture sorption curve and moisture permeability, compared to direct laboratory measurements.
American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE) (2010) ANSI/ASHRAE Standard 62.2, Ventilation for Acceptable Indoor Air Quality. Atlanta, GA: American Society of Heating, Refrigerating and Air Conditioning Engineers.
2.
American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE) (2012) Air-to-air energy recovery equipment. In: ASHRAE (ed.) ASHRAE Handbook—HVAC Systems and Equipment, ch. 26. Atlanta, GA: American Society of Heating, Refrigerating and Air Conditioning Engineers, pp. 26.1–26.28.
3.
BarringerCGMcCuganCA (1989) Effect of residential air-to-air heat and moisture exchangers on indoor humidity. ASHRAE Transactions95(2): 461–474.
BoardmanCRGlassSVCarllCG (2010) Estimating foundation water vapor release using a simple moisture balance and AIM-2: case study of a contemporary wood-frame house. In: Proceedings of the thermal performance of the exterior envelopes of whole buildings XI international conference, Clearwater Beach, FL, 5–9 December 2010.
6.
CarllCGBoardmanCROlsonCL (2010) Case study: performance of a house built on a treated wood foundations system in a cold climate. In: Proceedings of the thermal performance of the exterior envelopes of whole buildings XI international conference, Clearwater Beach, FL, 5–9 December 2010.
7.
ChenCCMoreyRV (1989) Comparison of four EMC/ERH equations. Transactions of the American Society of Agricultural Engineers32(3): 983–990.
8.
CSA (2009) CAN/CSA-C439-09—Standard Laboratory Methods of Test for Rating the Performance of Heat/Energy-Recovery Ventilators. Toronto, ON, Canada: CSA Group.
9.
FangXWinklerJChristensenD (2011) Using EnergyPlus to perform dehumidification analysis on Building America homes. HVAC&R Research17(3): 268–283.
IncroperaFDewittDBergmanT. (2006) Fundamentals of Heat and Mass Transfer. 6th ed.Hoboken, NJ: John Wiley & Sons.
12.
JanssenH (2011) Thermal diffusion of water vapour in porous materials: fact or fiction?International Journal of Heat and Mass Transfer54: 1548–1562.
13.
KoutsoyiannisD (2012) Clausius-Clapeyron equation and saturation vapour pressure: simple theory reconciled with practice. European Journal of Physics33: 295–305.
14.
NiuJLZhangLZ (2001) Membrane-based enthalpy exchanger: material considerations and clarification of moisture resistance. Journal of Membrane Science189: 179–191.
15.
OswinCR (1946) The kinetics of package life. III. The isotherm. Journal of the Society of Chemical Industry65(12): 419–421.
16.
RodeCWoloszynM (2007) Whole-building hygrothermal modeling in IEA Annex 41. In: Proceedings of the thermal performance of the exterior envelopes of whole buildings X international conference, Clearwater Beach, FL, 2–7 December 2007.
17.
SchirmerR (1938) Die Diffusionszahl von Wasserdampf-Luft-Gemischen und die Verdampfungsgeschwindigkeit. Beiheft VDI-Zeitschrift, Verfahrenstechnik6: 170–177.
18.
SiauJF (1995) Wood: Influence of Moisture on Physical Properties. Blacksburg, VA: Department of Wood Science and Forest Products, Virginia Polytechnic Institute and State University.
19.
SparrowEMAbrahamJPMartinGP. (2001) An experimental investigation of a mass exchanger for transferring water vapor and inhibiting the transfer of other gases. International Journal of Heat and Mass Transfer44: 4313–4321.
20.
StammAJ (1964) Wood and Cellulose Science. New York: The Ronald Press Co.
21.
StraubeJBurnettE (2005) Building Science for Building Enclosures. Westford, MA: Building Science Press.
22.
TanakaO (1984) An analysis of simultaneous heat and water vapor exchange through a flat paper plate cross flow total heat exchanger. International Journal of Heat and Mass Transfer27(12): 2259–2265.
23.
WalkerISShermanMH (2007) Humidity implications for meeting residential ventilation requirements. In: Proceedings of the thermal performance of the exterior envelopes of whole buildings X international conference, Clearwater Beach, FL, 2–7 December 2007.
24.
ZhangLZJiangY (1999) Heat and mass transfer in a membrane-based energy recovery ventilator. Journal of Membrane Science163: 29–38.
