Air transport control has been recognized as critical to the proper functioning of buildings. Airflow is related to all facets of environmental control because it influences transport of heat and moisture and affects indoor environment as well as the durability of the building enclosure. To a lesser degree, we also recognize that contamination of wall cavities in building assemblies by organic materials from inside or outside provides both the nutrients and the inoculation potential for mold growth. Moisture carried by air may also increase the rate of emission of volatile organic compounds from these materials. While keeping rain out of building enclosures is a primary consideration in design, controlling airflow through the building enclosure comes a close second in importance to allow environmental control within buildings. Yet, an increase in the airtightness comes with a cost as well as an increased risk of moisture entrapment in case of any failure, and this, in turn, relates to the type of the building.
BombergMGibsonMZhangJ (2015) A concept of integrated environmental approach for building upgrades and new construction: part 1—setting the stage. Journal of Building Physics38(4). DOI: 10.1177/1744259114553728.
2.
CarrieFRWoutersP (2012) Building airtightness: A critical review of testing, reporting and quality schemes in 10 countries, TightVent report 4, Sint-Stevens-Woluwe, September.
3.
ChanWRShermanMH (2011) Preliminary analysis of U.S. residential air leakage database v. 2011. In: 2011 32nd AIVC conference and 1st TightVent conference: towards optimal airtightness performance, Available at: http://homes.lbl.gov/sites/all/files/chan-sherman-lbnl-5552e.pdf
ElmrothALevinP (1983) Air Infiltration Control in Housing—A Guide to International Practice. Stockholm: Swedish Council for Building Research.
7.
EN-ISO 13829. Thermal performance of buildings—determination of air permeability of buildings—fan pressurization method.
8.
EN-ISO 12569. Thermal performance of buildings and materials—determination of specific airflow rate in buildings—tracer gas dilution method.
9.
Erhorn-KluttigHErhornH (2012) Philosophy and approaches for air tightness requirements in Germany. In: Proceedings of the international workshop: achieving relevant and durable air tightness levels: status, options and progress needed, Brussels, 28–29 March.
10.
GidsWBorsboomW (2012) Philosophy and approaches for air tightness requirements in the Netherlands. In: Proceedings of the international workshop: achieving relevant and durable air tightness levels: status, options and progress needed, Brussels, 28–29 March.
HultELShermanMHWalkerIS (2013) Blower door techniques for measuring interzonal leakage. In: Proceedings of the thermal performance of the exterior envelopes of whole buildings XII, ASHRAE/DOE/BTECC. Available at: http://eetd.lbl.gov/publications/blower-door-techniques-for-measuring-
14.
KaragiozisAKKumaranMK (1993) Computer model calculation of the performance of vapor barriers in Canadian residential buildings. ASHRAE Transactions99(2): 991–1003.
15.
LiddamentM (2012) Philosophy and approaches for air tightness requirements in the UK. In: Proceedings of the international workshop: achieving relevant and durable air tightness levels: status, options and progress needed, Brussels, 28–29 March.
16.
LstiburekJW (1998) Toward an understanding and prediction of air flow in buildings. PhD Thesis, University of Toronto, ON, Canada.
17.
LstiburekJWPressnailKTimuskJ (2002) Evaluating the air pressure response of multizonal buildings. Journal of Building Physics25: 299–320.
18.
OffermanJORobertsonJSpringerD. (2008) Window usage, ventilation and formaldehyde concentrations in New California homes: summer field sessions. ASHRAE Transactions.
19.
OjanenTRKumaranMK (1996) Effect of exfiltration on the hygrothermal behaviour of a residential wall assembly. Journal of Building Physics19: 215–228.
ShawCY (1981) A correlation between air infiltration and air tightness for houses in a developed residential area. ASHRAE Transactions87(Pt. 2): 333–341.
22.
ShermanMHWalkerIS (2011) Meeting residential ventilation standards through dynamic control of ventilation systems. Energy and Buildings43: 1904–1912.
SimonsPRolfsmeierS (2012) Postulate for airtightness limits in large buildings. In: Proceedings of the 33rd AIVC—2nd TIGHTVENT conference, Copenhagen, October.
TurnerWJNWalkerIS (2013) Using a ventilation controller to optimise residential passive ventilation for energy and indoor air quality. Building and Environment70: 20–30.
28.
WalkerISShermanMHJohJ. (2013) Applying large datasets to developing a better understanding of air leakage measurement in homes. International Journal of Ventilation11(4): 323–338. Available at: http://www.ijovent.org/doi/abs/10.5555/2044-4044-11.4.323
BombergMTKumaranMK (1986) A test method to determine air flow resistance of exterior membranes and sheathings. Journal of Building Physics9: 224–235.
31.
CHBA (1989) Canadian Home Builders’ Association Builders’ Manual. R-2000 Project.
32.
CMHC (1990) Ventilation and Airtightness of New Detached Canadian Housing, Research Div.
33.
CMHC (1993) Field investigation survey of airtightness, air movement, and indoor air quality in high rise apartment buildings, Summary Report for CMHC.
34.
CMHC (1995) EASE Demonstration House APCHQ’s Advanced House.
35.
CMHC (1997) Field Investigation of Indoor Environment and Energy Usage in Mid-Rise Residential Buildings.
36.
DemaraisGDeromeDFazioP (2000) Mapping of air leakage in exterior walls. Journal of Building Physics24: 132–154.
37.
DickensHBHutcheonNB (1965) Moisture accumulation in roof spaces under extreme winter conditions. In: RILEM/CIB Symposium Moisture Problems in Buildings, vol. 1.
38.
EyreD (1981) Air-Vapor Barrier Manual. Saskatoon, SK, Canada: Saskatchewan Research Council (SRC).
39.
ForestT (1990) Drying of Walls Prairie Region.
40.
GanguliU (1986) Wind and Air Pressures on the Building Enclosure, an Air Barrier for the Building Enclosure, NRC. In: Proceedings of building science insight, pp. 7–13.
41.
GardenGK (1965) Control of Air Leakage is Important. CBD 72, DBR: NRC.
42.
GreigAR (1922) Wall Insulation, U. of Saskatchewan, College of Engineering. Bul. No. 1.
43.
HandegordGO (1960) Vapor Barriers in Home Construction. CBD 9, DBR: NRC.
44.
HechlerFGMcLaughlinERQueerER (1942) Simultaneous heat and vapor transfer characteristics of an insulating material. ASHVE Transactions48: 505.
45.
HutcheonNB (1998) The utility of building science, reprint of the lecture delivered in 1971. Journal of Thermal Environment and Building Science22: 4–9.
46.
HutcheonNBHandegordGO (1980) Evolution of the insulated wood-frame wall in Canada. In: Proceedings of the 8th CIB congress, Oslo. vol. 16, pp. 434–438.
47.
JoyFAQueerERSchreinerRE (1948) Water vapor transfer through building materials: Bulletin No. 61, Pennsylvania State College, Engineering Experiment Station.
48.
KentADHandegordGORobsonDR (1966) A study of humidity variations in Canadian houses, ASHRAE Transactions72(Part II): 11.1.1–11.1.8.
49.
LstiburekJW (1995) Two case studies with failures in the environmental control of buildings. Journal of Building Physics19: 149–172.
50.
LstiburekJWLischkoffJK (1984) A New Approach to Affordable, Low Energy House Construction. Edmonton, AB, Canada: Department of Housing.
51.
LstiburekJWPressnailKTimuskJ (2000) Transient interaction of buildings with HVAC systems—Updating the state of the art. Journal of Thermal Environment and Building Science24: 111–131.
52.
LuxMEBrownWC (1986) Air leakage control, an air barrier for the building enclosure. NRC. In: Proceedings of building science insight, pp. 13–19.
53.
MH (1991) Structural Requirements for Air Barriers and Testing of Air Barrier Construction Details. Atlanta, GA: Morrison Hershfield Ltd.
54.
NRC (1988) Testing Air Barrier Systems for Wood Frame Walls. IRC/NRC.
55.
NRC (1990) Establishing the Protocol for Measuring Air Leakage and Air Flow Patterns in High-Rise Apartment Buildings. Ottawa, ON, Canada: Institute for Research in Construction, NRC.
56.
NRC (1993) Building Performance News. Issue No. 17.
57.
OrrHW (1974) Condensation in electrically heated houses. In: 2nd international CIB/RILEM symposium on moisture problems in buildings.
58.
PerraultJC (1986) Air barrier systems: Construction applications, an air barrier for the building enclosure. NRC. In: Proceedings of building science insight, pp. 20–24.
59.
QuirouetteRL (1985) The Difference Between a Vapor Barrier and an Air Barrier. Building Practice Note 54. IRC: NRC.
60.
QuirouetteRL (1986) The air barrier defined, an air barrier for the building enclosure. NRC, In: Proceedings of building science insight, pp. 1–7.
61.
RowleyFB (1939) A theory covering the transfer of vapor through materials. ASHVE Transactions45: 545.
62.
RowleyFBAlgrenABLundCE (1938) Condensation within walls, and condensation and moisture in relation to building construction and operation. ASHVE Transactions44.
63.
SasakiJRWilsonAG (1962) Window Air Leakage. CBD 25, DBR: NRC.
64.
SasakiJRWilsonAG (1965) Air leakage for residential windows. ASHRAE Transaction71(Part 11): 81–88.
65.
ShermanMHChanR (2004) Research and Practice Lawrence Berkeley Nat Lab Raport No LBNL-53356, 2004.
66.
StrickerS (1975) Measurement of airtightness of houses. ASHRAE Transactions81(1): 148–167.
67.
TamuraGTWilsonAG (1963) Air leakage and pressure measurements on two occupied houses. ASHRAE Transactions5(12): 65–73.
68.
TamuraGTWilsonAG (1966) Pressure differences for a nine-storey building. ASHRAE Transactions72(Part 1): 180–189.
69.
TamuraGTWilsonAG (1967) Building pressures caused by Chimney action, and pressure differences caused by Chimney effect in three high buildings, ASHRAE Transactions73(Part II).
70.
TamuraGTKuesterGHHandegordGO (1974) Condensation Problems in Flat Wood-Frame Roofs. In: 2nd International CIB/RILEM symposium on moisture problems in buildings.
71.
TamuraGT (1975) Measurement of air leakage characteristics of house enclosures. ASHRAE Transactions81(1): 202–211.
72.
TeesdaleLV (1943) Comparative resistance to vapor transmission of various building materials. ASHVE Transactions49: 24.
73.
TimuskJ (1992) Moisture control in wood framed wall assemblies. In: 6th conference on building science and technology.
74.
TorpeGGraeeT (1961) The effects of air currents in moisture migration and condensation in wood-frame structures. Bygg9(l): 1–10. Available as NRCC TT-1478.
75.
Trow (1989) Criteria for air leakage characteristics of building enclosures—Final Report.
76.
WalkerJSWilsonDJShermanMH (1997) A comparison of power law to quadratic formulations for air infiltration calculation. Energy and Buildings27(3). June1993.
WilsonAG (1960b) Influence of the house on Chimney draft. ASHRAE Transactions2(12): 63.
79.
WilsonAG (1961) Air Leakage in Buildings. CBD 23, DBR: NRC.
80.
WilsonAG (1992) Moisture in Canadian wood-frame housing construction: Problem, research and practice from 1975 to 1991. Report to CMHC.
81.
WilsonAGGardenGK (1965) Moisture accumulation in walls due to air leakage. In: RILEM/CIB symposium on moisture problems in buildings, vol. 1. Helsinki.
82.
WilsonAGNowakE (1959) Condensation between panes of double windows. ASHRAE Transactions65: 551–570.
83.
WilsonAGSolvasonKRNowakES (1959) Evaluation of factory-sealed double-glazed window units. ASTM, STP 251, pp. 3–16.
